Latest New Product News from Electro Industries/Gaugetech
Power Meter features IEC 61850 protocol capability.Electro Industries/Gaugetech Westbury, NY 11590
Aug 09, 2013 With IEC 61850 capability through INP300S Network Card, Shark® 200 Multifunction Power and Energy Meter can provide integral power information for smart substation solutions. Network card includes support for Modbus and IEC 61850 protocols simultaneously as well as support for 5 simultaneous MMS clients. Device is configurable for multiple logical nodes and provides both buffered and unbuffered reporting. Additional features include dual Ethernet 61850 and/or DNP3.0 Ethernet support.
Multi-Point Metering System offers remote display capability.Electro Industries/Gaugetech Westbury, NY 11590
Aug 02, 2013 Part of total environmental impact program, Model MP200 allows users to monitor and reduce energy consumption system-wide by allocating costs and responsibility to energy users. WiFi-communicating system is available with optional 3.5 or 5.7 in. HMI LED touchscreen that offers local display and/or remote display over network. Enabling user to view up to 24 metering points, display allows access to real-time metering information anywhere throughout facility.
Multi-Point, High-Density Metering System is WiFi capable.Electro Industries/Gaugetech Westbury, NY 11590
May 17, 2013 Accommodating up to 24 measurement points for metering in space-limited applications, MP200 provides choice of common communication architectures – serial RS485 using Modbus protocol, wired Ethernet port, or 802.11 Wi-Fi – for relaying data. System secures data using WEP, WPA, or WPA2 encryption when using WiFi. Also, onboard memory allows for data logging and load profiling of energy consumed over time for each circuit, while software enables creation of reports and sub-metering bills.
Power and Energy Meter supports dual Ethernet cards.Electro Industries/Gaugetech Westbury, NY 11590
Mar 26, 2013 Offering frequency measurement accuracy up to 0.001 Hz, Shark® 200 supports DNP 3.0 Ethernet, which provides up to 5 simultaneous connections of DNP 3.0 in addition to 7 Modbus sessions per card and full customizable Web Server capabilities. Two separate Ethernet cards, each with its own IP address and MAC address, allow users to send data to multiple networks from same meter. With DNP Ethernet, Shark 200 is suitable for providing telemetry for complex automation and control solutions.
Meter Assembly facilitates switchgear expansion.Electro Industries/Gaugetech Westbury, NY 11590
Dec 12, 2012 Supplied in NEMA enclosure, Self-Enclosed Shark® Meter Assembly lets users expand switchgear capability without redesign. This cUL/UL listed product comes pre-wired and in either 120 or 277 V configuration. As retrofit in environments without available metering compartment, assembly can be mounted and wired next to existing switchgear. Available multifunction meters include Shark 100 power and energy meter; Shark 100B with native BACnet/IP protocol; and Shark 200 with data-logging and I/O.
Power Meter performs utility substation measurements.Electro Industries/Gaugetech Westbury, NY 11590
Nov 26, 2012 Providing data logging capabilities, Shark® 200 Multifunction Power and Energy Meter is used by industry and utilities worldwide to measure and report on electrical power. Frequency measurement has been optimized to provide accuracy to 0.001%, allowing meter to be used for power system frequency analysis and as frequency transducer. Additional features include real-time clock synchronizing, wide dynamic voltage under-range, and variety of communication port selections.
Electric Panel Meter meets 0.5% accuracy classes.Electro Industries/Gaugetech Westbury, NY 11590
Oct 23, 2012 Suited for OEM and commercial applications, Shark® 50 multifunction power and energy meter features component count and DSP design that promote reliability and operational life expectancy. Optional Modbus RS485 serial port can be equipped for digital communication of energy usage data and KYZ pulse to pulse energy usage. Applications include tenant metering, low voltage panel board metering, and other high-volume deployments.
Self-Enclosed Power Meter expands switchgear capability.Electro Industries/Gaugetech Westbury, NY 11590
May 22, 2012 Supplied in NEMA 12 enclosure, Shark® meter assembly comes pre-wired and configured in either 120 or 277 V (for 277/480 V systems) configuration and is suited for use as retrofit solution in environments where there is no available metering compartment. Assembly can be mounted and wired next to existing switchgear and is available with Shark 100 power and energy meter; Shark 100B, with native BACnet/IP protocol; or Shark 200, with data-logging and I/O.
Power Monitor LED Display features USB port for data downloads.Electro Industries/Gaugetech Westbury, NY 11590
Mar 31, 2011 Designed for use with Nexus® family of Smart power monitors, P40N+ LED display with USB port has 3 lines of data display and front panel USB port for direct data downloads. Integrated USB port allows unit to connect directly to computer for remote viewing and downloading of all meter data and logs. Product can also act as Master display to Amps and Watts/VAR/PF displays for access to their readings.
Energy Management Software supports Windows® 7 and Vista.Electro Industries/Gaugetech Westbury, NY 11590
Oct 22, 2010 Comprised of 5 modules, Communicator EXT v3.0 helps monitor, control, and analyze use of electricity. It enables users to leverage smart metering technology, including multi-generational support for modern and legacy meters installed worldwide. In addition to remote dial-in and outage reporting support, suite offers capabilities that let users view real time readings, configure meters, download stored logs, analyze waveforms, and connect graphical HMI.
Click below for more Product News from Electro Industries/Gaugetech
Other Company News From Electro Industries/Gaugetech
Nov 28, 2012
Electro Industries Enhances the Nexus® 1252 Meter
Mar 27, 2012
Electro Industries Releases Auto Export(TM) Metering Software
Jul 18, 2007
Shark® 100-S Wifi Enabled Sub-Meter Attains UL Certification
Aug 22, 2006
Electro Industries Announces Approval by California ISO of its Nexus 1262 and 1272 Watt-hour Revenue Meters
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|