Optical Dissolved Oxygen Sensor provides years of service.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Feb 22, 2013 Employing fluorescence quenching sensing element that eliminates need for frequent calibration or membrane replacement, Triton DO80 continuously analyzes oxygen level, water temperature, and air pressure to calculate dissolved oxygen values. Max error is less than 2%, repeatability is ±0.5%, and resolution is 0.01 ppm or 0.01% saturation. Developed for harsh municipal and industrial water treatment environments, sensor offers 0–20 ppm, 0%–200% percent saturation, or 0–6 psi outputs.

Single-Channel Transmitter delivers several measurements.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Jan 24, 2013 With ¾ in. OD 316 stainless steel body, Model T80 Universal Transmitter is designed for continuous measurement of pH, ORP, pION, Dissolved Oxygen, Turbidity, Conductivity, or Resistivity in general-purpose industrial environment. Product digitally communicates with any Model S80 Intelligent Sensor and automatically configures menus and display screens. Transmitter also accepts any standard pH, ORP, or pION sensor with solution ground using optional T80 input card.

Chlorine Dioxide Analyzer supports raw water treatment.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Dec 07, 2012 Featuring plumb-and-play design, Model CDA-22 ensures CIO2 levels are properly maintained as part of water source filtration system. Unit incorporates polarographic gold/silver PTFE membrane amperometric CIO2 sensor, automated flow control, and analyzer/controller mounted on PVC panel. Equipped with 2.5 x 1.75 in. backlit LCD, analyzer provides 4–20 mA output proportional to Chlorine Dioxide measured and 2 alarm relays - SPDT 230 Vac/5 A or 30 Vdc/5 A resistive max.

Intelligent Turbidity Sensor utilizes optical IR technology.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Jun 04, 2012 With accuracy of up to 2% of reading or 5 NTU, Triton® TR6 measures turbidity or suspended solids; 4 selectable dual ranges feature preset lows/highs from 0-4,000 NTU. Sensor can also be combined with 2-channel C22 analyzer to monitor pH, ORP, DO, conductivity, pIon, and more. Emitting 850 nm beam, temperature-compensated sensor provides turbidity measurement in mg/L, ppm, and percent solids to volume. Unit can be installed in inline flow cell and is submersible up to 500 m.

Ammonium Sensors suit water treatment applications.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Feb 07, 2012 Utilizing replaceable electrode cartridges, MVS10 and MVS17 Ammonium pIon Sensors measure activity of free ammonium ions in solution in concentrations from 0.1-14,000 ppm over pH range from 2-8 pH. Model MVS10 consists of insertion- or immersion-style sensor for use in pipe tees, while Model MVS17 features valve-retractable design for insertion into pipe without interrupting process flow. Constructed of 316 SS, sensors operate over temperature range of 32-104°F and pressure range of 0-50 psig.

Boiler Blowdown Controller reduces water and energy consumption.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Oct 10, 2011 Helping reduce plant operating costs and extend boiler life, automated Model 61 Boiler Blowdown Control System provides continuous control of surface blowdown rate to optimize commercial and industrial boiler water electrolytic conductivity. System includes CS10 conductivity sensor in rack mounted panel, sediment trap, sample cooler, temperature gauge, sample control valve, and safety relief valve. System operates from 0 to +100°C and 0-75 psig.

Dechlorination Analyzer requires no chemicals to monitor seawater.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Mar 15, 2011 Model DCA-23 monitors chlorine in seawater from 0.0-2.0 ppm. Unit measures pH from 0-14, temperature from 0-100°C, and Total Residual Oxidant of seawater from ±1,500 mV, and converts them into equivalent ppm chlorine value. Minimum detection limit is 0.014 ppm and limit of quantification is 0.044 ppm. With max pressure rating of 50 psig at 60°C, Model DCA-23 is suited for LNG terminals, electric power plants, and municipal water desalination plants.

Air Blast Spray Cleaner cleans sensors in water treatment systems.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Feb 10, 2011 By preventing buildup of biofilms and other soft coatings, Model AC10 helps maintain accuracy of HYDRA Ammonium and Nitrate Analyzers in turbid water conditions. Automatic Sensor Cleaning System, combined with Sensor Spray Head and C22 Analyzer/Controller, uses pressurized air to generate area of high turbulence in water surrounding measurement end of sensor. Available with 115 Vac, 3.0 A or 220 Vac, 1.3 A air compressor, Model AC10 can be used as single- or dual-channel system.

Conductivity Sensor withstands harsh industrial processes.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Dec 03, 2010 Designed for high-temperature service up to 200°C at 250 psig, 2-electrode Model CSX2 measures electrolytic conductivity from 1.0-50,000 µS. At temperatures below 100°C, sensor is rated for pressures up to 400 psig. Unit features 316 SS outer body and center electrode, separated by PEEK® internal insulator. All possible leak paths are double-sealed with EPR O-rings. Applications include boiler control, condensate monitoring, leak detection on heat exchangers, and steam purity measurements.

Online Colorimetric Analyzer provides water/wastewater analyses.

Electro-Chemical Devices, Inc.    Yorba Linda, CA 92887
Oct 29, 2010 Available with up to 4 channels, Model CA-6 performs colorimetric or Ion Selective Electrode based laboratory analyses. System utilizes photometric differential absorbance to analyze over 20 common parameters, including aluminum, silica, phosphate, iron, and sulfate. Operating from 5-50°C, unit offers repeatability of ±2% on absorbance value if turbidity is less than 80 NTU. Analyzer is housed in cold rolled steel cabinet with separate compartments that isolate liquids and electronics.