Latest New Product News from CeramTec North America Corp.
Push/Pull and BNC Connectors target UHV industry.CeramTec North America Corp. Laurens, SC 29360
Oct 25, 2012 Combining stainless steel components with glass-ceramic insulators, Push & Pull Connectors come in single and 4-pin models, as well as welded and flange mounted configurations. Units withstand over 1,000 cycles of mating engagements, making them suitable for analytical equipment. Using stainless steel, glass ceramic, and Inconel, single and double ended BNC Connectors can sustain 500 Vdc, 1 A, and Cryogenic temperatures down to 4 K. Units operate with 50 Ω matched impedance at up to 12 GHz.
Cooling Device accommodates extreme packing densities.CeramTec North America Corp. Laurens, SC 29360
Jun 03, 2011 Made of aluminum nitride, CeramCool® Box provides efficient cooling for extreme packing densities. Temperature profile is consistent, with thermal conductivity of greater than or equal to 170 W/mK. Electric conductors are placed directly on ceramic heat-sink, forming permanent connection without thermal barriers or risk of delamination. At 1 mm, walls minimize distance between coolant and heat source to optimize heat transfer. Cooling water connections consist of one inlet and outlet.
Aluminum Nitride Extrusion offers power insulating properties.CeramTec North America Corp. Laurens, SC 29360
May 09, 2011 Exhibiting uniform thermal conductivity and expansion in all directions, Alunit® allows rod-shaped bodies and tube systems made of ceramic to possess optimal mechanical stability and dielectric strength. Aluminum nitride extrusion features thermal expansion coefficient of approximately 4 ppm/K and high heat conductivity of greater than or equal to 170 W/mK, making it suitable for high-power electronic applications.
Double Ended Connector is suited for data/signal transmission.CeramTec North America Corp. Laurens, SC 29360
Jan 13, 2011 Designed to take voltages up to 7 kV, double ended HN Connector has glass ceramic insulator and current rating of 2.5 A. It suits high frequency signal transmission or fast rise time pulses for data transmission. Ceramaseal® products include industry-standard coaxial connectors, ranging from Microdot through SHV. Coaxial connectors, manufactured for high and ultra-high vacuum service, are available with or without air side plugs and come in grounded and floating shield versions.
Micro D Type Connectors feature hermetically sealed design.CeramTec North America Corp. Laurens, SC 29360
Jan 13, 2011 Suited for military and commercial aircraft, IR cameras, and laser-guided systems, RoHS-compliant Ceramaseal® Mil Spec Connectors are available with 9, 15, 25, or 51 gold-plated pin/socket contacts on .050 in. centers. Contacts are available as weldable unit in ConFlat® or ISO flange. Each pin is individually sealed and electrically insulated from stainless steel housing, allowing for high pin/lead density.
Hermetic Feedthroughs offer safe air side connectivity.CeramTec North America Corp. Laurens, SC 29360
Jan 02, 2007 Available in 40 kV and 50 kV, Hermetic High Voltage Feedthroughs each have 10 A current carrying capacity. Units include weldable, ConFlat®, and ISO flange-mounted installation configurations. Corona-resistant cable assembly utilizes molded silicone body and silicone insulated cable in lengths of 8 ft. Built for extreme conditions, feedthroughs feature temperature capability of -269 to 450°C and are guaranteed to be leaktight to leak rate less than 1 x 10-10 atc-cc/sec.
Feedthrough enables safe high power connectivity.CeramTec North America Corp. Laurens, SC 29360
Aug 10, 2006 Featuring copper conductor, .250 in. Power Plug Feedthrough and Cable Assembly handles up to 25 kV and 100 A. It is available in weldable, ConFlat®, and ISO flange-mounted installation configurations of 1-4 pins. Cable assembly utilizes custom plug or boot to mate to feedthrough and 6 AWG tin-plated copper conductor cable with silicone insulation. Feedthrough has temperature capability of -269 to 450°C, with leak rate of less than 1 x 10-10 atm-cc/sec.
Ceramic Substrate offers 180 W/mK thermal conductivity.CeramTec North America Corp. Laurens, SC 29360
Dec 08, 2004 Non-toxic Alunit® aluminum nitride ceramic substrate delivers 10 times more insulating power and heat conductivity than aluminum oxide. Material is suited for thin-film and thick-film applications, and is offered in 4 surface finishes: fired, fired superior, ground, and polished. It can be used for high-density components and hybrids in applications such as power electronics, IGBT modules, telecom components, cooling devices, direct copper bonding, and LEDs.
Ceramic Substrate provides strength and elasticity.CeramTec North America Corp. Laurens, SC 29360
Jun 08, 2004 Available in thicknesses of .008, .010 and .015 in., Rubalit® HSS aluminum oxide ceramic substrate is available in standard dimensions up to 5 x 6.5 in. Based on 3 Point Method for testing bend strength, substrate measured more than 700 Mpa, with modulus of elasticity rated at 335 GPa. Bulk density tests out at 4.35 g/cm³. Applications include automotive, power supply, sensing, durable goods, telecom, medical, and aerospace systems.
Feedthroughs provide electrical isolation and hermetic seal.CeramTec North America Corp. Laurens, SC 29360
Oct 15, 2002 Single conductor thermocouple feedthroughs, offered as loop type or spade type, are available in Chromel, Alumel, Iron, Constantan, Tungsten 5% Rhenium, or Tungsten 26% Rhenium. Three and five pair spade type thermocouples are offered in Type K, Type J, and Type E. They come with air-side plugs and vacuum-side connection hardware. Circular connector thermocouples are available in Type K materials. All feedthroughs are available as weldable or flanged units.
Click below for more Product News from CeramTec North America Corp.
Other Company News From CeramTec North America Corp.
Apr 08, 2013
Transparent PERLUCOR Advanced Ceramics
Apr 03, 2013
CeramTec North America to Showcase Ceramic-to-Metal Seal and Glass-to-Metal Seal Technology at the 56th Annual SVC Technology Exhibition
Jan 22, 2013
CeramTec North America to Exhibit at SPIE Photonics West 2013 Exhibition
Dec 26, 2012
CeramTec North America Announces New President
Aug 29, 2012
CeramTec North America to Showcase Ceramic-To-Metal Seal and Glass-To-Metal Seal Technology at AVS 59th International Symposium and Exhibition
Jul 13, 2012
2012 Four Hills Tournament on ALOSLIDE® ICE
Jun 29, 2012
CeramTec North America to Exhibit at the Military Vehicles Exhibition
Mar 26, 2012
CeramTec to Exhibit at the 2nd International Guangzhou Vacuum Industry Show
Mar 21, 2012
CeramTec North America to Exhibit at SPIE Defense, Security, and Sensing 2012
Nov 07, 2011
CeramTec North America Awarded the Silver Supplier Award from Sandia National Laboratories
Aug 15, 2011
CeramTec North America to Exhibit at GlobalSpec's Defense and Security Technology Event
Aug 08, 2011
CeramTec North America to Exhibit at AVS 2011
Jul 29, 2011
CeramTec's Advanced Ceramics for the Automotive Industry
Jun 08, 2011
CeramTec Announces Latest Brochure: From the Experts for Advanced Ceramics
May 24, 2011
CeramTec North America to Exhibit at IDGA's ArmorCon
Apr 07, 2011
CeramTec North America's Grinding Capabilities
Mar 18, 2011
CeramTec North America to exhibit at SPIE Defense, Security, and Sensing
Mar 16, 2011
CeramTec's CeramCool® Product is being used to create Energy-saving and Maintenance-free Streetlights
Feb 28, 2011
CeramTec North America to Exhibit at PITTCON 2011
Feb 08, 2011
CeramTec North America Celebrates the 60th Anniversary of its Ceramaseal® Brand
Jan 25, 2011
CeramTec North America to Exhibit at the Medical Design & Manufacturing West (MD&M West)
Jan 05, 2011
CeramTec North America Sealing Technology
Aug 16, 2010
CeramTec North America is ISO 9001:2008 Certified
Apr 26, 2010
CeramTec North America Enhances Website
Jan 12, 2010
CeramTec North America Announces New 3C Product Line
Jan 12, 2010
CeramTec North America Introduces New President
Dec 18, 2009
CeramTec Offers New Version of Ceramaseal® Products Catalog
Oct 01, 2009
Cumulative Lead Time Reduction
Sep 11, 2009
CeramTec North America Updates Website
Sep 30, 2008
Ceramtec Signs Contract
Sep 03, 2008
Ceramtec North America is Pleased to Announce That Eddie Lu has Joined Us as Our Hermetic Sales Engineer in China.
Aug 04, 2008
Ceramtec North America is Pleased to Announce That Mark Duchnak has Joined Us as National Sales Manager.
Jun 30, 2008
CeramTec 3rd Annual Military Armor Protection Sponsor
Aug 14, 2007
CeramTec's Ceramaseal® Products Support the European Space Agency
Jan 15, 2007
Ceramtec Launches New Catalog for Ceramaseal® Products
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|