Latest New Product News from Pentek
Two-Channel Analog RF Tuner is suited for intelligence systems.Pentek Upper Saddle River, NJ 07458
Nov 12, 2013 Bandit® Model 7120 accepts, amplifies, filters, and downconverts 400 MHz to 4 GHz RF signals to IF signal suitable for A/D conversion by signal acquisition modules. Front panel SSMC connections on shielded PMC/XMC module aid integration into RF systems. Low noise amplifiers are provided along with 2 programmable attenuators, allowing downconversion of -60 to -20 dBm input signals in 0.5 dB steps. Input frequency is programmable across 400–4,000 MHz band with tuning resolution of <100 KHz.
XMC FPGA Module suits UAV, radar, communications applications.Pentek Upper Saddle River, NJ 07458
Oct 24, 2013 Based on Xilinx Virtex-7 FPGA, single-channel Onyx® Model 71730 employs 1 GHz, 12-bit ADC and 1 GHz, 16-bit DAC. Module comes with 4 GB DDR3 memory (1,600 MHz) and can receive and transmit at same sampling rate, supporting signal bandwidths up to 400 MHz. Gen 3 PCIe interface delivers peak transfer rates to 8 GBps, and optional LVDS and gigabit serial connections to Virtex-7 FPGA are available. Built-in functions are provided for data capture, synchronization, time tagging, and formatting.
LVDS Recorders come in commercial and ruggedized versions.Pentek Upper Saddle River, NJ 07458
Oct 08, 2013 Capable of handling 32-pair differential LVDS DIO signals, Talon® turnkey recording systems include commercial rackmount RTS 2718, rugged portable RTR 2738, and rugged rackmount RTR 2758. Disk storage technology promotes flexibility and enables aggregate recording rates to 4 GBps. Systems can capture any type of streaming source, including live transfers from sensors or data from other computers. Gigabit Ethernet and USB interfaces and 8X double layer DVD±R/RW drive are standard.
LVDS DIO Module serves control, data capture applications.Pentek Upper Saddle River, NJ 07458
Aug 27, 2013 With built-in data capture and data generation facilities, Model 71610 provides 32 LVDS differential input or output pairs plus LVDS clock, data valid, and flow control signals via front panel, 80-pin connector routed to Virtex-6 FPGA. This VITA 42 XMC Cobalt® module can plug into such carriers as VPX, cPCI, AMC, and PCIe. While x4 PCIe is supported on primary P15 XMC connector, secondary P16 XMC connector supports dual 4X or single 8X user-installed gigabit serial interfaces.
OpenVPX Boards incorporate Xilinx Virtex FPGAs.Pentek Upper Saddle River, NJ 07458
Jul 19, 2013 Incorporating Xilinx Virtex-6 and Virtex-7 FPGAs for onboard signal processing, 52xxx Series includes ruggedized and commercial grade boards for military and avionics applications. Compact 3U OpenVPX software radio modules support VPX REDI and PCIe x4 over VPX P1 connector. Available in air-cooled and conduction-cooled options, boards feature synchronous clocking locked to external system reference and LVPECL synch bus for synchronizing multiple modules to increase channel count.
Simulator Software provides recording system evaluation.Pentek Upper Saddle River, NJ 07458
Jun 26, 2013 Available for Talon® analog and digital recording systems, SystemFlow Simulator includes virtual recorder server application that simulates disk and I/O transactions for realistic recording environment. Using SystemFlow GUI or API, virtual server provides live, interactive operation for training or development. Product demonstrates actual Configuration, Record, Playback, and Status screens of GUI, and also includes Signal Viewer to display simulated live signals being digitized and recorded.
High-Speed Clock Generator is offered in PMC/XMC form factor.Pentek Upper Saddle River, NJ 07458
Jun 03, 2013 Delivering clock frequencies up to 2 GHz, Model 7194 provides fixed frequency sample clocks to up to 4 analog-to-digital Cobalt® and Onyx® modules in multi-board systems. Generator enables synchronous sampling, playback, and timing for range of multichannel, high-speed data acquisition and software radio applications. Using PMC P14 or XMC P15 connectors solely for power, product can be mounted in any PMC or XMC site. Carriers enable adaption for PCIe, AMC, cPCI, VME, and VPX.
PC Development System supports software radio applications.Pentek Upper Saddle River, NJ 07458
May 10, 2013 Assembled and pre-configured for Cobalt® Virtex-6 and Onyx® Virtex-7 FPGA PCI Express software radio and DAQ I/O boards, Model 8266 is delivered with selected hardware configured for Windows 7 Professional or Linux OS, along with ReadyFlow® BSP drivers and software examples. Built on 4U rackmount workstation, Model 8266 includes Intel Core i7® processor, DDR3 SDRAM, and PCIe motherboard. All coaxial and timing cables are installed and tested, providing SMA connectivity for analog I/O lines.
RF/IF Signal Recorders capture signal bandwidths to 200 MHz.Pentek Upper Saddle River, NJ 07458
Feb 21, 2013 Configured in 4U 19 in. rack-mountable chassis, Models RTR 2707 and RTR 2747 offer recording and playback of RF/IF signals up to 700 MHz with signal bandwidths to 200 MHz. Systems feature 500 MHz 12-bit A/Ds or 400 MHz 14-bit A/Ds and 800 MHz 16-bit D/A. Model RTS 2707 has up to 20 hot-swappable magnetic hard drives for up to 20 TB of data storage, while Model RTR 2747 provides up to 24 hot-swap SSDs with combined capacity to 11.5 TB. Both include front panel USB ports and I/O connectors on rear panel.
Digital Downconverter suits wideband radar and SDR applications.Pentek Upper Saddle River, NJ 07458
Jan 23, 2013 Preconfigured with programmable 1- or 2-channel digital downconverter loaded into onboard Xilinx Virtex-6 FPGA, Model 71641 is capable of digitizing one 12-bit channel at 3.6 GHz or 2 channels at 1.8 GHz. Each DDC has independent 32-bit tuning frequency programmable from DC to ƒs, where ƒs is A/D sampling frequency. In single channel mode, DDC decimation can be programmed to 8x, 16x, or 32x. In dual channel mode, both channels share same decimation rate, programmable to 4x, 8x, or 16x.
Click below for more Product News from Pentek
Other Company News From Pentek
Mar 25, 2013
Pentek Launches Extensive Line of AMC Products for Signal Processing I/O
May 23, 2011
Pentek Brings Power of Cobalt Virtex-6 Family to CompactPCI System Designs
Feb 28, 2011
Pentek Enhances ReadyFlow Board Support Package to Speed Embedded System Development
Nov 01, 2010
Pentek Takes Leadership Role in Delivering Advanced COTS Solutions Targeting Military Applications
Sep 28, 2010
"Pentek Triples Number of Cobalt High-Performance Xilinx Virtex®-6 FPGA Modules for Radar and Communication Applications
Jul 30, 2009
Pentek Announces New SMP VxWorks Support for Feature-Packed VXS I/O Processor Board
Jan 27, 2009
Pentek Announces New Family of PCI Express Boards
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|