Latest New Product News from Pentek Inc.
PC Development System supports software radio applications.Pentek Inc. Upper Saddle River, NJ 07458
May 10, 2013 Assembled and pre-configured for Cobalt® Virtex-6 and Onyx® Virtex-7 FPGA PCI Express software radio and DAQ I/O boards, Model 8266 is delivered with selected hardware configured for Windows 7 Professional or Linux OS, along with ReadyFlow® BSP drivers and software examples. Built on 4U rackmount workstation, Model 8266 includes Intel Core i7® processor, DDR3 SDRAM, and PCIe motherboard. All coaxial and timing cables are installed and tested, providing SMA connectivity for analog I/O lines.
RF/IF Signal Recorders capture signal bandwidths to 200 MHz.Pentek Inc. Upper Saddle River, NJ 07458
Feb 21, 2013 Configured in 4U 19 in. rack-mountable chassis, Models RTR 2707 and RTR 2747 offer recording and playback of RF/IF signals up to 700 MHz with signal bandwidths to 200 MHz. Systems feature 500 MHz 12-bit A/Ds or 400 MHz 14-bit A/Ds and 800 MHz 16-bit D/A. Model RTS 2707 has up to 20 hot-swappable magnetic hard drives for up to 20 TB of data storage, while Model RTR 2747 provides up to 24 hot-swap SSDs with combined capacity to 11.5 TB. Both include front panel USB ports and I/O connectors on rear panel.
Digital Downconverter suits wideband radar and SDR applications.Pentek Inc. Upper Saddle River, NJ 07458
Jan 23, 2013 Preconfigured with programmable 1- or 2-channel digital downconverter loaded into onboard Xilinx Virtex-6 FPGA, Model 71641 is capable of digitizing one 12-bit channel at 3.6 GHz or 2 channels at 1.8 GHz. Each DDC has independent 32-bit tuning frequency programmable from DC to ƒs, where ƒs is A/D sampling frequency. In single channel mode, DDC decimation can be programmed to 8x, 16x, or 32x. In dual channel mode, both channels share same decimation rate, programmable to 4x, 8x, or 16x.
Multiband Modular RF Receivers downconvert antenna signals.Pentek Inc. Upper Saddle River, NJ 07458
Jan 10, 2013 Used stand-alone or integrated on 3U VPX or larger carrier modules, Model 8111 series accepts 800 MHz to 3 GHz RF signals and downconverts them to 225 MHz IF signal suited for A/D conversion by signal acquisition modules. Internal frequency-synthesized local oscillator can be locked to external 10 MHz reference signal for precise tuning accuracy, or on-board 10 MHz OCXO can serve as frequency reference. Each tuner is provisioned with one of 7 different 400 MHz bandwidth preselector filters.
RF/IF Signal Recorder, Playback System is portable and rugged.Pentek Inc. Upper Saddle River, NJ 07458
Dec 14, 2012 Suitable for military/aerospace applications, Talon® Model RTR 2727 offers recording and playback of IF signals up to 700 MHz with signal bandwidths to 200 MHz. It can be configured with 500 MHz, 12-bit ADCs or 400 MHz, 14-bit ADCs and 800 MHz, 16-bit DAC. SystemFlow software enables turnkey operation via GUI, while API fosters integration of recording software into custom applications. Chassis supports up to 8 hot-swap SSDs (3.8 TB max) with RAID 0/1/5/6 as well as several I/O interfaces.
Multichannel Software Radio Module is based on Virtex-7 FPGA.Pentek Inc. Upper Saddle River, NJ 07458
Nov 26, 2012 Onyx Model 71720 3-channel, 200 MHz A/D, 2-channel 800 MHz D/A module features 4 GB, 1,600 MHz DDR3 memory and PCIe Gen 3 interface with peak transfer rates up to 8 GB/sec. Included GateXpress™ FPGA-PCIe hardware engine facilitates managing reconfiguration of FPGA through software commands. Designed for air- and conduction-cooled systems, module also includes functions for data capture, synchronization, time tagging, and formatting in radar, communications, or DAQ applications.
Rugged IF Signal Recorder survives extreme environments.Pentek Inc. Upper Saddle River, NJ 07458
Nov 13, 2012 Supplied in conduction-cooled ½ ATR chassis with up to 1.92 TB solid-state RAID storage, configurable Extreme Talon® Model RTX 2786 digitizes and records multiple analog input channels using 200 MHz, 16-bit ADCs. Recording and playback system, which supports remote control, can capture up to 80 MHz of instantaneous bandwidth for IF signals ranging up to 700 MHz. Unit supports recording rates to 500 MBps from up to 4 data channels and also incorporates digital downconverters.
Quad 1.25 GHz DAC Module suits beamforming and software radio.Pentek Inc. Upper Saddle River, NJ 07458
Oct 01, 2012 Intended for RF and IF waveform playback, Cobalt® Model 71671 delivers 4 independent analog outputs – each through its own digital upconverter and 16-bit D/A with sampling rates to 1.25 GHz. On-board Xilinx Virtex-6 FPGA contains IP that provides turnkey waveform generation for output signal bandwidths from less than 1 kHz up to 250 MHz with extended interpolation range from 2x–1,048,576x. Module operation may also be customized by users implementing their own IP in FPGA.
RF/IF Rackmount Recorder captures ultra wideband signals.Pentek Inc. Upper Saddle River, NJ 07458
Aug 22, 2012 Using 12-bit, 3.6 GHz ADCs and RAID-enabled SSD storage (20 TB max), Talon(TM) RTS 2709 offers sample rates to 3.2 GHz and achieves real-time sustained recording rates up to 3.2 GB/sec. This 1- or 2-channel system can record sampled data packed as 8- or 16-bit wide consecutive samples. Suited for capturing RF/IF signals with frequencies up to 2.8 GHz, recorder has built-in Windows® 7 Pro workstation that lets user directly install post-processing and analysis applications.
PCI Express Board synchronizes up to 256 channels.Pentek Inc. Upper Saddle River, NJ 07458
Jul 09, 2012 Supporting up to 8 Pentek Virtex-6 Cobalt® and Pentek Virtex-7 Onyx(TM) boards at sample clock rates up to 800 MHz, Model 7893 single-slot system synchronization and distribution amplifier supports multi-channel, phase-coherent applications. Up to eight 7893 boards can be linked in cascade mode to allow 64 Onyx or Cobalt boards to receive common clock along with timing signals for synchronizing, triggering and gating functions.
Click below for more Product News from Pentek Inc.
Other Company News From Pentek Inc.
Mar 25, 2013
Pentek Launches Extensive Line of AMC Products for Signal Processing I/O
May 23, 2011
Pentek Brings Power of Cobalt Virtex-6 Family to CompactPCI System Designs
Feb 28, 2011
Pentek Enhances ReadyFlow Board Support Package to Speed Embedded System Development
Nov 01, 2010
Pentek Takes Leadership Role in Delivering Advanced COTS Solutions Targeting Military Applications
Sep 28, 2010
"Pentek Triples Number of Cobalt High-Performance Xilinx Virtex®-6 FPGA Modules for Radar and Communication Applications
Jul 30, 2009
Pentek Announces New SMP VxWorks Support for Feature-Packed VXS I/O Processor Board
Jan 27, 2009
Pentek Announces New Family of PCI Express Boards
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|