Latest New Product News from Pentek
GSM Monitoring Receiver suits government and military systems.Pentek Upper Saddle River, NJ 07458
May 15, 2014 Using optimized IP core for Xilinx Virtex-6 FPGA, Cobalt® Model 52663 3U VPX Module is suited for mobile monitoring systems that must capture some or all of 1100 uplink and downlink signals in both upper and lower GSM bands. Unit accepts 4 analog inputs from external analog RF tuner, where GSM RF bands are down converted to IF frequency. IF signals are then digitized by 4 A/D converters and routed to 4 channelizer banks, which perform digital downconversion of all GSM channels to baseband.
Virtex-7 Transceiver Board suits communication, radar systems.Pentek Upper Saddle River, NJ 07458
Apr 30, 2014 As 2-channel, wideband transceiver 3U VPX board based on Xilinx Virtex-7 FPGA, Onyx® Model 52751 is suitable for connection to HF or IF ports of communication or radar systems. Along with built-in data capture and generation features, board includes two 500 MHz 12-bit ADCs followed by 2 DDCs and two 800 MHz, 16-bit DACs with DUC. Programmable decimation and interpolation ranges for each DDC and DUC cover transceiver signal bandwidths from 4 kHz to 200 MHz.
XMC Software Radio Module suits wideband signal applications.Pentek Upper Saddle River, NJ 07458
Apr 02, 2014 Based on Xilinx Virtex-7 FPGA, Onyx® Model 71741 can digitize signal bandwidths up to 1,500 MHz. Front end accepts analog RF or IF inputs on pair of front panel SSMC connectors with transformer coupling into ADC12D1800 12-bit A/D. Converter operates in single-channel interleaved mode with 3.6 GHz sampling rate and 1.75 GHz input bandwidth or in dual-channel mode with 1.8 GHz sampling rate and 2.8 GHz input bandwidth. AutoSync feature supports A/D synchronization across multiple modules.
Rackmount Recorders operate in extreme environments.Pentek Upper Saddle River, NJ 07458
Feb 25, 2014 Housed in 4U military-specified chassis constructed using heavy-duty wrought aluminum extrusions, Talon® RTX Series provides aggregate recording rates up to 5 GBps. QuickPac™ canister allows storage drives to be removed and replaced in field. Each canister holds 8 SSDs, providing 7.68 TB of storage. Up to 4 QuickPac canisters can be installed in chassis for over 30 TB of total storage. In addition to forced air cooling system, recorders include 600 W, 85–264 V, 47–400 Hz AC power supply.
FMC/VPX Carrier features optical backplane interface.Pentek Upper Saddle River, NJ 07458
Jan 27, 2014 As 3U VPX FMC carrier with a Virtex-7 FPGA, Flexor™ Model 5973 features VITA 57.1 FMC (FPGA Mezzanine Card) site, 4 GB DDR3 SDRAM, PCIe (Gen 1, 2, and 3) interface up to x8, optional user-configurable gigabit serial I/O, and optional LVDS connections to FPGA for custom I/O. Flexor Model 3312 FMC offers four 250 MHz 16-bit A/Ds and two 800 MHz 16-bit D/As. FMC connector matches Virtex-7 FPGA carrier to promote performance and flexibility.
High-Speed, Rugged Recorders serve ground/ship/air applications.Pentek Upper Saddle River, NJ 07458
Dec 20, 2013 Suited for recording and reproducing wideband IF signals at sample rates up to 1 GS/sec, Talon® Model RTR 2728 (portable) and Model RTR 2748 (rackmount) are turnkey systems that use SSD storage technology to achieve aggregate recording and playback rates up to 4 GBps. Both systems are built on Windows® 7 Professional workstation with Intel® Core™ i7 processor and provide GUI and API, signal analysis tools, and up to 38.4 TB of hot-swappable SSD storage.
Two-Channel Analog RF Tuner is suited for intelligence systems.Pentek Upper Saddle River, NJ 07458
Nov 12, 2013 Bandit® Model 7120 accepts, amplifies, filters, and downconverts 400 MHz to 4 GHz RF signals to IF signal suitable for A/D conversion by signal acquisition modules. Front panel SSMC connections on shielded PMC/XMC module aid integration into RF systems. Low noise amplifiers are provided along with 2 programmable attenuators, allowing downconversion of -60 to -20 dBm input signals in 0.5 dB steps. Input frequency is programmable across 400–4,000 MHz band with tuning resolution of <100 KHz.
XMC FPGA Module suits UAV, radar, communications applications.Pentek Upper Saddle River, NJ 07458
Oct 24, 2013 Based on Xilinx Virtex-7 FPGA, single-channel Onyx® Model 71730 employs 1 GHz, 12-bit ADC and 1 GHz, 16-bit DAC. Module comes with 4 GB DDR3 memory (1,600 MHz) and can receive and transmit at same sampling rate, supporting signal bandwidths up to 400 MHz. Gen 3 PCIe interface delivers peak transfer rates to 8 GBps, and optional LVDS and gigabit serial connections to Virtex-7 FPGA are available. Built-in functions are provided for data capture, synchronization, time tagging, and formatting.
LVDS Recorders come in commercial and ruggedized versions.Pentek Upper Saddle River, NJ 07458
Oct 08, 2013 Capable of handling 32-pair differential LVDS DIO signals, Talon® turnkey recording systems include commercial rackmount RTS 2718, rugged portable RTR 2738, and rugged rackmount RTR 2758. Disk storage technology promotes flexibility and enables aggregate recording rates to 4 GBps. Systems can capture any type of streaming source, including live transfers from sensors or data from other computers. Gigabit Ethernet and USB interfaces and 8X double layer DVD±R/RW drive are standard.
LVDS DIO Module serves control, data capture applications.Pentek Upper Saddle River, NJ 07458
Aug 27, 2013 With built-in data capture and data generation facilities, Model 71610 provides 32 LVDS differential input or output pairs plus LVDS clock, data valid, and flow control signals via front panel, 80-pin connector routed to Virtex-6 FPGA. This VITA 42 XMC Cobalt® module can plug into such carriers as VPX, cPCI, AMC, and PCIe. While x4 PCIe is supported on primary P15 XMC connector, secondary P16 XMC connector supports dual 4X or single 8X user-installed gigabit serial interfaces.
Click below for more Product News from Pentek
Other Company News From Pentek
Mar 25, 2013
Pentek Launches Extensive Line of AMC Products for Signal Processing I/O
May 23, 2011
Pentek Brings Power of Cobalt Virtex-6 Family to CompactPCI System Designs
Feb 28, 2011
Pentek Enhances ReadyFlow Board Support Package to Speed Embedded System Development
Nov 01, 2010
Pentek Takes Leadership Role in Delivering Advanced COTS Solutions Targeting Military Applications
Sep 28, 2010
"Pentek Triples Number of Cobalt High-Performance Xilinx Virtex®-6 FPGA Modules for Radar and Communication Applications
Jul 30, 2009
Pentek Announces New SMP VxWorks Support for Feature-Packed VXS I/O Processor Board
Jan 27, 2009
Pentek Announces New Family of PCI Express Boards
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|