Ethernet Timing Card supports narrow loop bandwidths.

Microsemi    Irvine, CA 92614
Jun 10, 2013 Intended for mobile infrastructure and packet-based carrier Ethernet networks, ZL30162 single-chip timing card device features 4 T0 programmable integrated digital phase lock loops (DPLLs) capable of locking up to 11 inputs for applications that require independent transmit and receive timing paths. Timing card devices ZL30161 and ZL30163 feature single and dual DPLLs, respectively. Each of DPLLs on all models can be configured to perform as NCOs.

Any-Rate Clock Multipliers deliver jitter as low as 180 fs.

Microsemi    Irvine, CA 92614
Jun 05, 2013 Providing any-to-any frequency conversions for clock signals from 10–750 MHz, MAX24405/10 and MAX24505/10 clock synthesizers and MAX24605/MAX24610 jitter attenuators all integrate 2 synthesizers and support 2 independent frequency families. Jitter as low as 180 femtosecond (fs) provides spec-compliant timing for high-performance system components and multi-gigabit interfaces. While MAX24505/MAX24510 have on-chip EEPROM, MAX24605/MAX24610 integrate low-loop-bandwidth DPLL.

Self-Encrypting SSD serve security-oriented applications.

Microsemi    Irvine, CA 92614
May 31, 2013 Powered by Armor™ processor, TRRUST-Stor™ Series 200 includes 256 GB 2.5 in. SATA SSD that operates at sustained rates of 200 MBps. Full hardware-based erase takes <8 sec, users can load encryption keys, and TRRUST-Purge™ technology destroys keys in <30 msec when activated. Featuring in-line encryptor with hardware-implemented AES 256 encryption using XTS block cipher mode, SSD offers non-volatile storage via SLC NAND flash and withstands up to 3000G shock and 30 Grms vibration.

RF Transceiver supports China's unlicensed frequency bands.

Microsemi    Irvine, CA 92614
May 17, 2013 Suitable for use in unlicensed frequency bands ranging from 779–965 MHz, Model ZL70251 targets short-range wireless sensor products in industrial applications. Unit is fully functional over industrial temperature range of -40 to 85°C, while still delivering peak power at 2 mA in both transmit and receive modes. Supplied in 3 x 2 mm chip scale package, ultra low power device requires only 2 external components, making it suitable for products with space constraints.

Isolated DC/DC Converters have SMT, radiation-hardened design.

Microsemi    Irvine, CA 92614
May 09, 2013 Suited for aerospace applications, SB30-100 series provides SEE-rated protection – 100 kRad (Si) TID – against total dose ionized radiation. Features include ability to directly convert power from satellite solar panel to end voltages required by FPGAs, DSPs, CPUs, MCUs, and other digital devices. Designed and constructed using SMT, converters provide 3 independent isolated outputs, typically at +5.0, +3.3 and +2.5 V at 30 W total, each of which is adjustable to ±10% and has its own PWM.

Clock Generators offer low jitter and power consumption.

Microsemi    Irvine, CA 92614
Apr 11, 2013 Intended for communications equipment, enterprise routers/switches, SAN equipment, and servers, dual-channel ZL30240 and single-channel ZL30241 generate output clocks with jitter as low as 0.27 psec (rms). Both consume <300 mW per channel and feature numerically controlled oscillators that can generate any frequency with fine tunability of 0.1 ppb. Products also feature 2–4 independently programmable outputs with support for multiple frequencies (up to 940 MHz) and multiple signal formats.

High-Temp Flash Memory withstands oil/gas drilling conditions.

Microsemi    Irvine, CA 92614
Mar 29, 2013 Addressing challenges to drilling equipment microelectronics, high-temperature NOR flash products meet environmental demands of oil and gas industry downhole drilling where temperatures reach 150°C and higher. Products come in 1, 4, and 16 Mb densities and withstand temperature, shock, and vibration encountered by equipment thousands of feet below surface. Package options include hermetic ceramic dual inline, small outline J-lead, flatpacks, ceramic quad flat pack, and pin grid array.

Non-Punch Through IGBTs serve high-performance applications.

Microsemi    Irvine, CA 92614
Mar 21, 2013 With 25, 50, and 70 A current ratings, 1,200 V non-punch through (NPT) IGBTs are based on Power MOS 8™ technology and can be packaged with Microsemi FREDs or silicon carbide Schottky diodes. Gate charge promotes accelerated switching, while hard switching operation greater than 80 kHz lends to power conversion efficiency. SMT backside solderable D(3) package option is available for these Short Circuit Withstand Time Rated (SCWT) products.

DLA-Qualified Schottky Diodes suit aerospace/defense applications.

Microsemi    Irvine, CA 92614
Mar 14, 2013 Offered in Thinkey™ package that features ceramic and metal construction with no wire bonds, U.S. Defense Logistics Agency (DLA)-qualified Schottky diodes offer typical heat dissipation from 0.2 to 0.85°C/W and enable double-side cooling. Soft solder is not used in construction, and 15, 30, and 45 V ratings are available. Series includes 1N6910UTK2–1N6912UTK2 (25 A) and 1N6940UTK3–1N6942UTK3 (150 A), with anode to strap (AS) or cathode to strap (CS) polarity.

Monolithic Translator integrates 4 DPLLs for 100G muxponders.

Microsemi    Irvine, CA 92614
Feb 11, 2013 Intended for OTN transport and switching applications, ZL30165 Line Card Device integrates 4 DPLLs capable of locking on up to 10 inputs, targeting muxponder applications that support multi-client transport on single wavelength. Each channel accepts and generates any frequency from 1 KHz to 750 MHz to support any communication service over optical networks. Operating from crystal resonator or clock oscillator, translator supports 8 input references configurable as single ended or differential.