Structural Acrylic Adhesives can replace welds and rivets.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Mar 08, 2011 Designed for structural assembly of metals, especially aluminum, Loctite® H8100 and H8110 Speedbonder(TM) Adhesives are green-colored, 2-component acrylic formulas that cure at room temperature. Loctite H8100 fixtures in 20 min, while Loctite H8110 fixtures in just 5 min. Both feature glass spacer beads that maximize toughness and prevent adhesive from squeezing out of joint during clamping. Available in 50 and 490 ml dual cartridges, adhesives are stronger that spot welds and rivets.

Anaerobic Threadlocker cures through contaminants.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Mar 01, 2011 Suited for metal fasteners from ¼-¾ in. in diameter, Loctite® 243(TM) withstands temperatures up to 360°F, cures without primers, and tolerates contamination from thread lubrication, anti-corrosion, and protection fluids. Removable-strength, medium-viscosity, thixotropic liquid will not migrate once applied to fastener's surface. Product fixtures in 5 min and achieves full cure in 24 hr. Registered to NSF Category P1, threadlocker can be used in and around food processing applications.

Two-Component, Instant Adhesive fills gaps up to 5 mm wide.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jun 01, 2010 Loctite 3090 is able to bond metal, plastic, rubber, and ceramic materials as well as porous substrates such as wood, paper, and cork. Two-chamber syringe packaging enables precise and clean application, and transparent gel formulation facilitates application to vertical surfaces without dripping. Working time is rated at 90-180 sec after application, and integrated static mixer ensures curing is triggered within defined timeframe.

UV Cure System suits benchtop production.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Nov 30, 2009 Loctite® Focused 400 W UV Flood Lamp cures adhesives used for bonding, potting, tacking, and sealing and emits light in UVA and UVB regions. Designed to cure 4 in. square area, unit weights about 4 lb and measures 7.5 x 4.5 x 5.8 in. Metal halide lamp also includes energy-saving standby position switch that reduces its output power by half when it is not being used. System can be used as handheld device or mounted above worksite. Expected UV lamp life is 1,000 hr.

Semisolid Pipe Sealant Stick does not spill or leak.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Nov 20, 2009 Loctite QuickStix 5671(TM) PST® seals tapered pipe thread fittings made of stainless steel, aluminum, galvanized metal, and other inert metals. Single component sealant eliminates leak paths and ensures complete contact between threads to fully seal assembly. Designed to prevent corrosion and galling in threads, this off-white anaerobic paste will not shrink or crack, ensuring long-term reliability. Self-feeding stick applicator is suitable for overhead or hard-to-reach applications.

Anaerobic Adhesive Dispenser eliminates wasted material.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Oct 29, 2009 Used to dispense anaerobic flange and gasket sealants from 50 ml tubes, Loctite® 50 ml Tube Squeeze Dispenser provides smooth and consistent adhesive flow. Ergonomic, trigger-controlled dispense gun eliminates tube squeezing and provides controlled positioning of adhesives. Manually operated dispenser incorporates pivoting tray that facilitates tube changeover. Design completely empties tube, reducing adhesive waste and conserving material expenditure.

One-Part Silicones cure rapidly when exposed to UV/Vis light.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jul 01, 2009 Comprised of 7 products, Loctite® Light Cure Silicones offer cure depths up to 2 in. and cure fully in seconds when exposed to high-powered UV or visible light. Solvent-free adhesives/sealants deliver elastic seal with optimized degradation resistance. Able to bond with silicone, plastic, and metal substrates, they exhibit weather, temperature, and moisture resistance. Uses include general bonding and sealing as well as replacing molded or die-cut gaskets and coating applications.

Underfill combines optimal flow, cure, and THB performance.

Henkel Loctite Corporation    Rocky Hill, CT 06067
May 28, 2009 Hysol® UF3800(TM) exhibits lack of need for substrate pre-heat that, combined with room temperature fast flow and low-temperature curing properties, helps manufacturers improve throughput rates. Designed for use with CSP and BGA devices, halogen-free underfill has reworkable nature and offers stable electrical performance under temperature humidity bias (THB). Solution is compatible with various Pb-free and halogen-free solder pastes, providing process flexibility.

Metal Cutting Fluids resist bacteria and foaming.

Henkel Loctite Corporation    Rocky Hill, CT 06067
May 04, 2009 Suited for machining and grinding ferrous and non-ferrous alloys, semi-synthetic Multan® B 236(TM) and B 414(TM) can be used continuously for years with minimal biological degradation. Multan® B 236(TM) is intended for cast iron and steel, which require rapid cooling, corrosion protection, and moderate lubrication. Multan® B 414(TM) is similar but contains more oil and additional extreme pressure additives making it suited for aluminum, stainless steel, titanium, inconel, brass, or copper.

Two-Part Silicones suit potting and sealing applications.

Henkel Loctite Corporation    Rocky Hill, CT 06067
May 04, 2009 Designed to rapidly bond dissimilar substrates, Loctite® Ultra-Clear Two-Part Silicones maintain flexibility at temperatures from -60 to 450°F. Non-corrosive products cure through large gaps and enclosed bond lines, require no primers, and offer low-odor dispensing. With elongations up to 240%, materials withstand extreme vibration, flexing, and thermal shock. Products cure to handling strength in 15 min and offer shelf lives in excess of 12 months at room temperature.