Waterjet Intensifier Pump features portable, modular design.

Jet Edge    St. Michael, MN 55376
Jul 27, 2012 Comprising hydraulic module, water module, and electrical module, each with lifting eyes, 50 hp Model iP36-50 produces up to 1.8 gpm of 36,000 psi ultra high pressure water for precision cutting, cleaning, and surface preparation applications. Modules are linked together by hydraulic hoses and electrical cables, which allows for separation from each other to distance of 10 ft. Modules can be stacked for tight spaces, such as small passageways, ship engine rooms, and ballast tanks.

Waterjet Cutting Machine processes material up to 5 x 13 ft.

Jet Edge    St. Michael, MN 55376
Aug 08, 2011 Powered by Jet Edge waterjet intensifier pump, Mid Rail Gantry Model MR513 comes standard with one abrasivejet cutting head or optinally with second and is sized for fabricators, machine shops, and stone/tile shops. Machine can cut complex parts from virtually any material without creating heat-affected zone (HAZ) and offers optional mirroring capability for accelerated large part cutting. Machine can also be configured so that all 3 axes are fully programmable (Z optional).

Waterjet Intensifier Pump supports pressure up to 60,000 psi.

Jet Edge    St. Michael, MN 55376
May 16, 2011 Supporting orifices up to .025 in., 150 hp Jet Edge iP60-150 produces up to 3 gpm ultra high pressure water for water jet cutting and surface preparation applications. Unit features dual intensifier systems, kidney loop hydraulic cooling and filtration system, anti-corrosive interior coated hydraulic reservoir, and touchscreen controls. Motor drive assembly is mounted on isolation system to minimize noise and vibration. With no threaded components, tie rod design is less prone to cracking.

Five-Axis Waterjet Cutting Machine cuts through any material.

Jet Edge    St. Michael, MN 55376
Oct 07, 2010 Available in 5.5 x 6.5, 5.5 x 13, and 6.5 x 13 ft sizes, Milestone 5-axis machine features IKC cutting head that can make inclined cuts and offers 600º rotation, maximum angle of ±60º, and precision from ±0.2 to ±0.5 mm/m. Unit includes ground rack-and-pinion X and Y axes and ball-screw-driven 5.9 in. Z axis, as well as steel covers with labyrinth lip seals that protect motion components. Contouring and feed rates from 0-1,575 ipm are supported.

Portable, Abrasive Waterjet Cutter suits hazardous locations.

Jet Edge    St. Michael, MN 55376
Sep 21, 2010 Spyder Abrasivejet Radius and Circle Cutting System features self-aligning centering pin for setup, motion components made from non-ferrous materials, and cutting head manipulators powered by pneumatic motors. Available in 1-6.5 in. ID/16-48 in. OD and 3-12.5 in. ID/27.5-56 in. OD sizes, portable unit can be set up on side of tanks, small vessels, and large diameter piping. System is powered by 60,000 psi waterjet intensifier pumps available in electric or diesel models up to 280 hp.

Water Jet Intensifier Pump produces up to1.35 gpm of pressure.

Jet Edge    St. Michael, MN 55376
Aug 11, 2010 Powered by 4-cylinder Cummins turbocharged diesel engine, portable 80 hp, 60,000 psi iP60-80DS water jet intensifier pump targets mobile water jet cutting applications. It is suited for cold cutting in heat and flames restricted environments. Intensifier components can be accessed without having to get into hydraulic center section and hydraulic rod seal.

Water Jet Cutting Machines feature IKC 5-axis cutting head.

Jet Edge    St. Michael, MN 55376
Aug 09, 2010 Capable of cutting virtually any material, Idro line water jet cutting machines are available in 3 sizes, 1,700 x 2,000, 1,700 x 4,000, and 2,000 x 4,000 mm. IKC's capabilities include 600º rotation, max angle of ±60º, and dynamic precision from ±0.2 to ±0.5 mm/m, depending on tilt of head. With ground rack and pinion X and Y axes and ball-screw-driven 150 mm Z axis, machines maintain ±0.004 in. cutting tolerance and ±0.001 in. repeatability accuracy tolerance.

Waterjet Intensifier Pump supports orifices up to 0.021 in.

Jet Edge    St. Michael, MN 55376
Oct 14, 2009 Capable of producing 2.0 gpm of ultra-high pressure, iP60-100, 100 hp, 60,000 psi pump suits precision waterjet cutting, water blasting, cleaning, and surface preparation applications. It features tie-rod design with no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder. Product features matched-metal components to prevent galling of hydraulic system components, and dual intensifiers for increased operating performance.

Waterjet Intensifier Pump supports orifices up to 0.021 in.

Jet Edge    St. Michael, MN 55376
Aug 12, 2009 Suited for precision waterjet cutting, water blasting, cleaning, and surface preparation applications, 100 hp 60,000 psi, iP60-100S single intensifier waterjet pump produces 2.0 gpm of ultra-high pressure water. It features tie-rod design with no threaded cylinder, end caps, or hydraulic cylinder, and matched-metal components for preventing galling of hydraulic system components. Rugged hydraulic center section of pump incorporates high duty cycle rated piston seal and wear rings.

Diesel Powered Waterjet Intensifier Pump is Tier 3 certified.

Jet Edge    St. Michael, MN 55376
Jul 17, 2009 Powered by 280 hp turbo diesel engine, iP36-280DS can produce flow rate of up to 7.2 gal/min of 36,000 psi pressure water for waterjet cutting, surface preparation and cleaning applications. It is built on skid-mounted frame with lifting eyes and forklift guides, and uses pressure-compensated hydraulic system to drive dual plunger-style intensifiers. Unit is also available in 55,000 psi model.