Wheeled Battery Charger offers multiple rates, operational modes.

Clore Automotive    Lenexa, KS 66215
Jun 12, 2012 In addition to operational modes that include auto charge, manual charge, and engine start, PRO-LOGIX PL3750 offers charge rates of 60/40/15/5 A for 6/12 V and 30/15/5 A for 24 V. Auto charge mode utilizes an MPU-controlled process to deliver optimal charge to each battery serviced, regardless of size or type, while Soft Start and Recondition routines automatically engage as needed. Also featuring 250 A of 12 V engine starting assistance, charger offers Smart Clamp Technology.

Lead Acid Battery Charger provides fully automatic operation.

Clore Automotive    Lenexa, KS 66215
Apr 12, 2012 After operator selects battery type and desired charge rate, Model 4520 executes automatic charging process, delivering consistent charge every time. Unit includes polarity protection, outputting current only when proper battery connection has been made. Rated at 12 V, 20/10/2 A, charger is compatible with variety of battery types and sizes, including conventional, maintenance-free, AGM, gel cell, deep cycle, and marine batteries.

Intelligent Battery Charger charges multiple battery types.

Clore Automotive    Lenexa, KS 66215
Mar 09, 2012 SOLAR PRO-LOGIX Model No. PL2310 utilizes microprocessor-controlled logic to deliver precise charging routine. This 10/6/2 A, 6/12 V battery charger adapts its approach based on requirements of battery being serviced. Such adaptations can include use of soft start or battery repair modes and temperature compensation. Safety features include over-voltage and reverse polarity protections as well as battery fault detection.

Battery Charger offers fully automated operation.

Clore Automotive    Lenexa, KS 66215
Mar 08, 2012 SOLAR's 6/12 V, 1.0 A Pro-Logix battery maintainer, PL2110, controls each phase of charging process to ensure each battery serviced gets optimal charge. Compatible with various battery types, device comes in case sealed against dust/debris and features fully automatic operation as well as polarity protection. Quick attach cord on output side facilitates interface with included accessories: battery clamps, ring terminals, and 12 V male adapter.

Vehicle Battery Charger uses microprocessor-controlled logic.

Clore Automotive    Lenexa, KS 66215
Mar 08, 2012 Featuring 20/10/2 A, 6/12 V rating, PRO-LOGIX PL2320 combines fully automatic operation with ability to charge multiple battery types, including conventional, AGM, gel cell, spiral wound, deep cycle, and marine batteries. System adapts approach based on needs of each battery, such as activating soft start mode on deeply discharged batteries or battery repair mode on older/distressed batteries. For safety, charger includes over-voltage protection, reverse polarity protection, and fault detection.

Jump Starter (12 V) remains operational in extreme environments.

Clore Automotive    Lenexa, KS 66215
May 12, 2011 Powered by twin ES Series(TM) batteries, Truck PAC ES6000 delivers 3,000 A peak jump starting power for vehicles. Batteries provide 800 Cranking Amps of jump starting power, numerous jumps per charge, and extended service. While cable length facilitates positioning during jump starting, industrial-grade Hot Jaw(TM) clamps ensure max power transfer to vehicle. Jump starter, supplied in impact-resistant case, also offers automatic charging and battery status LEDs.

Portable Jump Starter delivers up to 900 A peak power.

Clore Automotive    Lenexa, KS 66215
Apr 29, 2011 Weighing 8 lb, CarStart CS1000 provides 900 peak amps to start passenger vehicles such as cars, SUVs, light trucks, personal watercraft, motorcycles, and ATVs. Unit comes with a high-intensity work light and 27 in. cable span, facilitating use in any shop, garage, or roadside environment. To ensure safe and effective operation, product also comes with full size clamps, No. 6 AWG cables, and Grip-Lock(TM) clamp storage system.

Jump Starter efficiently serves mixed-fleet environments.

Clore Automotive    Lenexa, KS 66215
Apr 14, 2011 Powered by dual Clore PROFORMER batteries, Jump-N-Carry JNC1224 delivers 3,400 peak Amps (850 cranking Amps) in 12 V mode and 1,700 peak Amps (425 cranking amps) in 24 V mode. Batteries are designed for vehicle jump starting and repeatedly deliver high output over short duration without degradation. Built-in automatic charger enables unit to charge at 24/7/365 rate, Industrial Grade Hot Jaw(TM) clamps penetrate corroded battery terminals, and No. 2 AWG cable leads optimize power transfer.

Battery Charger features 2-bank design.

Clore Automotive    Lenexa, KS 66215
Mar 25, 2011 Intended for small lead-acid and Gel Cell batteries, 12 V, 10 A Model C10122S can charge 2 batteries simultaneously and independently. Unit is designed to recover batteries affected by partial sulfation due to seasonal use or deep discharge during long storage periods. Dud Buster technology provides extra initial charge voltage to break through battery sulfation, then adjusts to normal charging voltage once battery begins to accept charging currents.

Wheeled Battery Charger offers multiple charging rates.

Clore Automotive    Lenexa, KS 66215
Mar 16, 2011 In addition to providing 200 A of engine starting assistance to boost disabled 12 V vehicle batteries, Model No. 4725 delivers 40, 20, and 5 A charge rates in 12 V mode and 40 A charge rate in 6 V mode. Ammeter lets operator monitor charging progress, and full size clamps can penetrate corroded battery terminals. Wheel size and handle design ease mobility, and overall design provices maneuverability and compact storage.