Sealing Ring Package extends short-stroke cylinder service life.

HASCO Hasenclever GmbH + Co KG    Ludenscheid, D-58513
May 09, 2013 Offered as maintenance set for HASCO Z236/… short stroke cylinder, Z2361/… sealing ring package enables damaged or old sealing rings to be replaced during interval between services. Sealing rings should be lightly greased with HASCO Z260/… heavy-duty lubricant prior to installation, and all components and sealing areas should be completely cleaned to avoid premature wear or damage. Use of O-ring mounting/removal tools will ensure damage-free installation and removal.

Touchscreen Display accelerates hot runner system installation.

HASCO Hasenclever GmbH + Co KG    Ludenscheid, D-58513
Dec 21, 2012 Offering touchscreen operation for multi-hot-runner control units Z1240/… and Z1246/…, Display unit Z12401/… facilitates installation of system, especially in multi-cavity applications. Solution is best positioned on operating stand of injection molding machine, and connection to control unit is made via supplied interface cable. Overview side adapts automatically to number of connected control units, and settings per zone or group are possible at any time.

Hot-Runner Nozzles offer options to suit various applications.

HASCO Hasenclever GmbH + Co KG    Ludenscheid, D-58513
Dec 07, 2012 Available as mono nozzles for simple applications and for injection moulding tools with hot runners, Techni Shot nozzles enable immersion depths up to 300 mm to be achieved and medium-sized mouldings up to ~1,700 g shot weight per nozzle to be produced. Open torpedo tips for needle valve applications are available, as are various tip geometries, materials, and screw-on gate chambers. Options enable optimum heat conduction in gate area to be combined with resistance to abrasive wear.

Temperature Control Units enhance mould plate conditions.

HASCO Hasenclever GmbH + Co KG    Ludenscheid, D-58513
Nov 14, 2012 TempFlex Z976/… (metric) and Z977/… (standard) offer optimum conditions for temperature control of mould plates or spacer plates with simultaneous conformal cooling. Adaptable to any groove pattern, flexible metal-braided hose facilitates assembly and interchangeability. Pressure losses are reduced via deflection of cooling via arcs; flow rates remain same. In addition to eliminating complex deep-hole bores, design offers square hose cross-section for optimum heat transfer to mould plates.

Countersunk Screw helps extend mould service life.

HASCO Hasenclever GmbH + Co KG    Ludenscheid, D-58513
Oct 08, 2012 Intended for thermal insulating sheets, Countersunk screw Z330/... has incorporates hexalobular internal driving feature (Torx®) to ensure optimum force transmission. Thread sizes are coordinated to suit HASCO thermal insulating sheets Z121/..., Z1212/..., and Z1213/..., and star-shaped Torx® geometry in screw heads transmits vertical torque. Despite torque absorption, damage to screw head and driver tip is avoided.

Multi-Cavity Needle Valve targets closure cap market. .

HASCO Hasenclever GmbH + Co KG    Ludenscheid, D-58513
Nov 28, 2011 Suited for processing polyolefins and styrene in shot weight range of 5-25 g, Series Z3150 allows optimized process control with balanced filling of all cavities by simultaneous opening of valve pins after certain amount of pressure has built up. Unit features nozzle front sealing diameter of 10 mm, body diameter of 16.5 mm, and finely scaled nozzle lengths from 80-180 mm. Needle valve pin can be changed on machine and adjusted from rear without dismantling hot runner.

Linear Ball Bearing Bushes offer unlimited stroke lengths.

HASCO Hasenclever GmbH + Co KG    Ludenscheid, D-58513
Jun 20, 2011 Able to withstand operating temperatures up to 180°C, Z13/... Series is designed primarily for precise guiding of ejector plates in injection molding tools, compression molds, and diecasting molds, and for guiding of mold plate assemblies. Guide ball bearings roll continuously in rotating ball tracks, virtually eliminating possibility of denting guide pillar. Installation of Z13/... Series in H7 drill holes is possible in tight spaces.

Guide Pillars feature groove-free design.

HASCO Hasenclever GmbH + Co KG    Ludenscheid, D-58513
Mar 29, 2011 Designed for use with Z1000W and Z1100W self-lubricating locating guide bushes, Guide Pillar Z04/... Series features continuous guide surface without lubrication grooves. Solid lubricant is placed in guide bushes in form of pellet to help form coherent film when sliding movements are required. Without grooves, adherent surface is not interrupted, preventing damage to graphite inserts and ensuring optimum lubrication.

Dual-Stage Ejector accommodates large plate movements.

HASCO Hasenclever GmbH + Co KG    Ludenscheid, D-58513
Dec 17, 2010 Available in 3 sizes, Z1698/... 2-stage ejector is designed for large plate movements that also need off-center mounting when central 2 stage ejector cannot be used. One potential application is demoulding with internal slide bars or inclined sliding carrier applications in front ejector assembly. Ejection motion is subdivided into 2 aligned strokes, whereby second is defined individually by end-user and manufactured by HASCO accordingly.

Hot Runner Nozzle is designed for side gating.

HASCO Hasenclever GmbH + Co KG    Ludenscheid, D-58513
Oct 01, 2010 Suited for articles such as sleeves and cannula tubes, Multi Shot Z10440/... features 2, 4, or 6 gating points that offer possibility of grouping cavities together in clusters to facilitate design of manifold tools. Nozzle, conceived specifically for application with polyolefins, has modular design that eliminates need to divide mould inserts. Individual nozzle tips can be exchanged without loosening remaining gates, and different nozzle lengths are available.