Embedded Communications Router connects to industrial networks.

HMS Industrial Networks AB    ,
Nov 16, 2012 Anybus® CompactCom™ 40-series features NP40 network processor and reprogrammable CompactCom hardware to support several networks. Unit installs into industrial device and firmware is downloaded to establish network connection. Suitable for industrial Ethernet and fieldbus applications with fast network cycles and synchronization demands, such as servo drive systems, product is available in chip, to integrate with PCB, brick, or interchangeable communication module form factors.

M-Bus System helps users optimize energy consumption.

HMS Industrial Networks AB    ,
Jun 08, 2012 Consisting of M-Bus converter and Anybus Communicator gateway, M-Bus System enables communication between M-Bus and any industrial network. Transparent M-Bus converter, working as M-Bus master, converts M-Bus signals to RS232 and enables connection of up to 10 standard M-Bus slave devices. Configured using included Windows-based software, Anybus Communicator translates RS232 signal to chosen fieldbus or Industrial Ethernet network. Typical applications include electricity, gas, and water metering.

Modbus TCP 2-Port Module eliminates need for external switches.

HMS Industrial Networks AB    ,
Jun 06, 2011 Providing two 100 Mbps full duplex Ethernet interfaces with RJ45 connectors, 2-port Anybus CompactCom for Modbus TCP enables industrial device manufacturers to achieve connectivity to Modbus TCP. Built-in switch, which reduces need for external switches and factory wiring, makes it possible to build networks in normal fieldbus style (daisy chain). Core is composed of NP30 MPU with integrated fast Ethernet controller as well as RAM and Flash memories for Modbus TCP device software stack.

Automation Network Gateway bridges EtherNet/IP and CANopen networks. .

HMS Industrial Networks AB    ,
Mar 31, 2011 With Anybus® X-gateway(TM) CANopen, system integrators can transfer I/O data between automation devices on EtherNet/IP and CANopen. After initial configuration, unit passes up to 510 bytes of input and 510 bytes of output data transparently between EtherNet/IP and CANopen. Up to 126 CANopen slaves can be connected to gateway using up to 128 receive PDOs and 128 transmit PDOs. Powered by 24 V industrial power supply, configurable gateway mounts to standard DIN rail.

CanOpen Gateways support various fieldbus communications.

HMS Industrial Networks AB    ,
Nov 24, 2010 Anybus X-gateway series allow any CANopen enabled device with slave functionality to communicate with 10 other fieldbus or industrial Ethernet networks. Embedded into slim plastic housing and based on HMS NP30 microprocessor, products offer DIN rail mounting and operate from 24 V power supply. Gateways do not require programming and transmit I/O data transparently between two networks. They integrate into any kind of industrial automation system.

Serial Gateways include DF1 serial protocol support.

HMS Industrial Networks AB    ,
Sep 01, 2010 Anybus® Communicator(TM) gateways enable connection of industrial devices that support Rockwell Automation DF1 protocol to 14 industrial network types, including DeviceNet, EtherNet/IP, ControlNet, Modbus/TCP, Profibus-DP, ProfiNet, and CANopen. Promoting integration, gateways also offer selectable serial RS-232/422/485-interface that enables users to choose between connecting one or several DF1 devices to Anybus Communicator.

CANopen Extension Module is designed for SIMATIC ET200S I/O system.

HMS Industrial Networks AB    ,
Jul 08, 2010 Series 1 SI CANopen extension module integrates CAN 2.0A with CANopen devices and can also be used for transmission/reception of any CAN 2.0A frame regardless of overlaying CAN application protocol. Module fits mechanically into standard ET200S system rack and can be engineered with STEP7 that supports configuration and diagnostics. Unit also includes PLC function blocks which are used to create and analyze CAN 2.0A frames directly in PLC program.

Gateway bridges Profibus and Modbus-TCP networks.

HMS Industrial Networks AB    ,
Apr 15, 2010 Anybus® X-gateway(TM) allows plant-floor devices on Profibus network to communicate with devices on Modbus-TCP network and vice versa. It functions as server (slave) on Modbus-TCP network and as master on Profibus side. After configuration has been downloaded into X-gateway, it passes up to 512 byte of input and 512 byte of output data transparently between Modbus-TCP and Profibus. Embedded web server on Modbus-TCP side supports web based remote diagnostics and visualization.

Interface Module endows Siemens' ET200S with CANopen support.

HMS Industrial Networks AB    ,
Nov 20, 2009 Plug-in 1SI CANopen extension module brings CANopen connectivity to Siemens SIMATIC ET200S distributed I/O system, allowing integration of CANopen-enabled devices into Siemens Profibus- and Profinet-based automation architecture. Mechanically fitting into standard ET200 system rack, module can be used in combination with all other Siemens modules of ET200S series. Integration into Step7 helps minimize engineering efforts.

Gateway bridges Profibus and SAE J1939 (CAN) networks.

HMS Industrial Networks AB    ,
Oct 21, 2009 Operating concurrently as Profibus-DP Slave on Profibus network and as CAN node on J1939 network, Anybus® lets Profibus-DP Master read and write J1939 network data for control/monitoring tasks. Data is exchanged from network-based or user-defined configuration, and included configuration tool lets user map J1939 parameter (PGN) data into I/O tables. Also, J1939 transport protocol handler rejects incoming session requests for PGN/Address pairs not configured as input data points.