Signal and Spectrum Analyzers supports EMI testing.

Rohde & Schwarz GmbH & Co    , -
May 22, 2013 FSW signal and spectrum analyzers are available with R&S FSW-K54 software option, which supports EMI bandwidths. To analyze disturbances, option contains EMI detectors, such as peak, quasi-peak, CISPR-average, and RMS-average, which are in line with CISPR and MIL standards. Option also includes database of predefined limit lines, as specified by international standards, as well as correction factors (transducers) for typical measurement tasks.

Signal/Spectrum Analyzer covers 2 Hz through 50 GHz range.

Rohde & Schwarz GmbH & Co    , -
May 14, 2013 Offering 12.1 in. touchscreen interface, MultiView function and MSRA function, R&S FSW50 signal and spectrum analyzer is suited for use in development, testing, verification, and production of transmitters and components such as those used in radar applications and satellite and military communications systems. Use of harmonic mixers enables extension of frequency range to 110 GHz. Analysis bandwidth of 320 MHz allows demodulation of wideband signals, such as radar chirps, up to 50 GHz.

Vector Signal Generator creates complex multichannel scenarios.

Rohde & Schwarz GmbH & Co    , -
May 08, 2013 Combining baseband generator, RF generator, and MIMO fading simulator, R&S SMW200A covers 100 KHz to 3 GHz frequency range and features I/Q modulation bandwidth of 160 MHz with internal baseband. System can be equipped with optional second RF path for frequencies up to 6 GHz, and with max of 2 baseband and 4 fading simulator modules, users get two VSGs in single unit. Fading scenarios such as 2 x 2 MIMO, 8 x 2 MIMO for TD-LTE, and 2 x 2 MIMO for LTE-Advanced carrier aggregation can be simulated.

Bench Oscilloscopes offer logic analysis option.

Rohde & Schwarz GmbH & Co    , -
May 08, 2013 Providing time domain, logic, protocol, and frequency analysis functions in single box, R&S RTM Series is suitable for testing and development of electronic circuits. RTB-B1 logic analysis option adds 16 logic channels to system. With sampling rate of 5 GS/s and memory depth of 20 Msamples, oscilloscopes enable users to make precise measurements of long signal sequences. RTM Series is available with 2 or 4 channels and bandwidth of 350 MHz or 500 MHz.

Signal Generator simulates up to 32 satellite signals.

Rohde & Schwarz GmbH & Co    , -
May 06, 2013 With frequency range of 950–3,000 MHz, R&S SLG generates up to 32 digital satellite TV transponders simultaneously and in real-time. Sixteen of 32 transponders transmit externally fed transport streams, while others transmit internally generated PRBS data. Transport streams are fed into instrument via IP or ASI interface, and each channel can contain ARB waveform or CW carrier instead of TV signal. R&S SLG can be operated from PC via web GUI, and can also be remote controlled via SCPI or SNMP.

Broadcast Network Management Software improves QoS.

Rohde & Schwarz GmbH & Co    , -
May 01, 2013 Offered as flexible, hardware-independent system for cable, satellite, and terrestrial broadcasting networks, R&S BC-NETSTATE enables entire broadcasting network to be monitored from central network operations center. Solution displays broadcast network on geographical map and integrates all devices at transmitter site or within network. All device parameters are scanned, processed, and displayed, and remote control is possible via Web interface.

Signal and Spectrum Analyzer offers baseband input option.

Rohde & Schwarz GmbH & Co    , -
Apr 26, 2013 With FSW-B71 option, FSW Signal and Spectrum Analyzer provides analog baseband inputs covering bandwidth of 80 MHz for I and Q signals. Feature is beneficial to developers of transmitter modules for complex signals such as WLAN IEEE 802.11ac and LTE if different chipsets are used to generate baseband signal and convert it to RF. Since signal can be tested in baseband prior to conversion to RF, developers can characterize entire signal chain using single device.

Video Encoding, Multiplexer supports DVB-S/-S2 standards.

Rohde & Schwarz GmbH & Co    , -
Apr 25, 2013 While designed with minimal hardware components, R&S AVHE100 integrates all essential functions for encoding and multiplexing. Core components – R&S AVS100 processing platform and R&S AVG100 A/V gateway – can be set up as DVB-S2 headend that includes multiple HD-SDI or satellite inputs, decoders and encoders for up to 6 HD or 10 SD programs, multiplexers, and workflow-oriented headend management system. Optional video wall enables QC on all critical interfaces of signal path.

High-Speed Sensor measures power in DC to 110 GHz range.

Rohde & Schwarz GmbH & Co    , -
Mar 20, 2013 With measuring speed of 300+ measurements/sec in buffered mode, R&S NRP-Z58 thermal power sensor has range of 55 dB (-35 to +20 dBm) and can be connected directly to PC via USB interface. Instrument delivers precise measurement results, due to linearity of 0.01 dB, when performing relative such measurements as amplification and reflection. Ball bearing 1.00 mm coaxial plug can be screwed securely onto jack of measuring instrument, promoting measurement reproducibility.

Broadband Amplifier enables EMC testing in microwave range.

Rohde & Schwarz GmbH & Co    , -
Mar 14, 2013 With modular design that enables flexible setup, R&S BBA150 can be used for EMC testing up to 3 GHz in line with common standards as well as for non-EMC applications in component production and QA. Mismatch tolerance as well as ability to handle both short-circuiting at RF end and open RF output promote availability. Depending on setup, scalable product can be manually operated via its display and buttons or automatically controlled via remote control interface or Web browser.