Latest New Product News from Fujitsu Semiconductor Europe GmbH
FRAM Modules support 10 trillion writing cycles.Fujitsu Semiconductor Europe GmbH Langen, D-63225
Mar 29, 2013 Providing 1 and 2 Mbits of memory, respectively, Models MB85RS1MT and MB85RS2MT are suited for real-time, continuous data-logging applications, including smart meters, industrial machinery, and medical devices. Serial-interface FRAM products eliminate need for battery and additional memory components, simplifying design process and saving board space. High-speed random access memory is non-volatile, allowing data to be retained when power is switched off.
Multiband LTE Transceiver Chip supports 2G/3G/4G.Fujitsu Semiconductor Europe GmbH Langen, D-63225
Mar 04, 2013 Incorporating envelope tracking and antenna tuning, MB86L11 Multimode Transceiver supports all wireless communication modes including LTE, HSPA+, DC-HSPA, WCDMA, GSM, EDGE, CDMA, and TD-SCDMA. Device supports entire frequency range of 700–2,700 MHz, functions in all modes of operation, and enables simultaneous bands and modes in single product configuration, covering almost any operator's needs for domestic use and global roaming.
FRAM Module enables miniaturization of portable applications.Fujitsu Semiconductor Europe GmbH Langen, D-63225
Nov 29, 2012 Housed in SON-8 package measuring 3 x 2 mm, 16 Kbit MB85RC16 Ferroelectric Random Access Memory includes I2C interface and consumes 0.1 µA in standby mode, extending battery life for products with long standby times, such as portable measurement equipment. Device's small form factor and low operating current also make it suitable for systems such as space-constrained wearable medical equipment that requires real-time data logging.
RISC Microcontrollers feature ARM® Cortex(TM) cores.Fujitsu Semiconductor Europe GmbH Langen, D-63225
Nov 19, 2012 Based on ARM® Cortex™-M4 processor core, 32-bit FM4 Series features DSP and floating point functions as well as SDRAM and SD card interfaces. Units also include CAN, USB 2.0, and Ethernet support, plus inverter control functions, high-speed ADCs, and high-speed serial communications, making them suitable for motor and network controls. FM0+ family, based on Cortex-M0+ core, features operating current of 70 µA/MHz and standby current of 0.7µA (in RTC mode), suitable for battery-operated devices.
Multi-Interface Bridge SoC simplifies Wi-Fi TV tuner designs.Fujitsu Semiconductor Europe GmbH Langen, D-63225
Nov 14, 2012 Supplied in 16 x 16 mm, 426-pin FBGA package with 0.65 mm ball pitch, MB86E631 combines dual-core ARM® Cortex™-A9 processor and 10 interfaces – USB 2.0, USB 3.0, SATA, PCIe, Ethernet MAC, transport stream (TS), UART, I˛C, DDR3, and Quad Serial Flash Controller – in one SoC. This product manages Wi-Fi TV tuner in equipment such as video-recording devices and TVs with built-in recording capabilities that transmit programming to other devices.
FRAM IC has wide voltage range, high-speed read/write cycle.Fujitsu Semiconductor Europe GmbH Langen, D-63225
Nov 09, 2012 Available in 3.9 x 5.05 mm and 5.30 x 5.24 mm SOP-8 packages, MB85RC256V operates from 2.7–5.5 V, offers non-volatile data memory capacity of 256 Kb with configurations of 32k x 8 bits, and provides 1012 times read/write cycle capability. IC retains data for up to 10 years at industrial temperature ranges and supports 2-wire serial bus transmission protocol (I˛C) with frequencies up to 1 MHz (operating from 4.5–5.5 V) and 400 kHz (from 2.7–4.5 V).
Bidirectional H.264/MPEG-2 Transcoders have built-in memory.Fujitsu Semiconductor Europe GmbH Langen, D-63225
Jun 27, 2012 Available in 13 mm˛ packages, models MB86M01 and MB86M03 are suitable for mobile devices, while MB86M02 transcoders in 21 mm˛ package are designed for home electronics. All 3 products include 1 Gigabit of Fast Cycle RAM. Consuming 1.2 W of power, single-chip transcoders have transrating function for conversion of H.264 video data into H.264 formats of various resolutions and bit-rates. Units support HD video up to 1,920 x 1,080 resolution, in addition to audio data conversion.
Multiband 4G Transceiver targets LTE-only applications.Fujitsu Semiconductor Europe GmbH Langen, D-63225
Apr 10, 2012 Covering 700-2,700 MHz frequency spectrum, Model MB86L13A eliminates need for external low noise amplifiers and inter-stage surface acoustic wave filters. Availability of multiple transmit, receive, and diversity ports offers flexibility to map ports and bands for roaming requirements, while API adds monitoring of customized key performance indicators. Using open standard IPI DigRFSM 4G v1.1Rev0.06 interface to baseband, device supports all global FDD bands 1-21, 23-25, and TDD bands 33-41.
Ferroelectric Random Access Memory promotes design flexibility.Fujitsu Semiconductor Europe GmbH Langen, D-63225
Mar 13, 2012 Featuring I˛C serial interfaces at operating frequency of 400 kHz, MB85RC16V and MB85RC64V operate from -40 to +85°C and respectively cover densities of 16 and 64 kbit. Reliability is evidenced via 10-year data retention at 85°C as well as endurance of 1 trillion read/write cycles. Both models accommodate common CMOS voltage range of 3.3-5 V while allowing +10% voltage swing tolerance, enabling system builders to consolidate designs around single FRAM for multiple platforms.
Multiband Transceiver IC targets 2G/3G/4G mobile products.Fujitsu Semiconductor Europe GmbH Langen, D-63225
Mar 01, 2012 Built using SAW-less architecture, which eliminates need for external LNAs, Model MB86L11A supports all modes, including LTE, HSPA+, WCDMA, GSM, EDGE, EDGE-EVO, CDMA, and TD-SCDMA. Envelope tracking technology minimizes radio system power consumption, while antenna tuning optimizes total radiated power output from antenna. Both extend battery life of mobile devices. Providing flexible port mapping, advanced programming interface adds customized KPI features.
Click below for more Product News from Fujitsu Semiconductor Europe GmbH
Other Company News From Fujitsu Semiconductor Europe GmbH
Apr 25, 2013
Fujitsu Expands Its FM3 Family of 32-bit MCUs with New Versions Featuring High-Capacity Memory, Low-Pin-Count Packaging
Mar 13, 2013
Fujitsu Demonstrates First ADC in Family of Low-Power, High-Speed, 28nm CMOS Converters
Nov 08, 2012
Fujitsu to Start Production of GaN Power Devices for High-Efficiency Power Supply Units in 2013
Feb 08, 2012
Fujitsu Enhances the FM3 Family of 32-Bit ARM-Based Microcontrollers with the Release of 210 New Products
Sep 20, 2011
Fujitsu and Fraunhofer IIS Co-operating on Nanometre Technology
Sep 13, 2011
Fujitsu Presented with Differentiation Excellence Award by Frost & Sullivan for CGI Studio
Apr 15, 2011
Cinemo and Fujitsu Form Technology Partnership
Apr 05, 2011
Fujitsu Semiconductor Announces Changes in Its Senior Management Structure
Mar 22, 2011
Fujitsu FM3 Microcontrollers for Industrial Applications
Mar 01, 2011
Fujitsu Announces World's First High-End Controller with APIX2 Interface for Automotive Applications
Mar 01, 2011
Fujitsu's New 'Emerald' Family Enables 360° Wrap-around View for Automotive Sector ... with the Added Flexibility of Virtual Cluster Applications
Feb 08, 2011
Fujitsu to Showcase Mobile Device Semiconductor Solutions at the 2011 Mobile World Congress, February 14-17, Barcelona
Dec 17, 2010
Fujitsu to Demonstrate Industry's Best-Performing USB 3.0-SATA Bridge ICs at the 2011 International CES, January 6-9
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|