Latest New Product News from Lee Products Ltd
Miniature Burst Disc Plugs provide over-pressure protection.Lee Products Ltd Buckinghamshire, SL9 9QE
May 23, 2014 Designed for critical liquid and gas flow control systems, Burst Disc Plugs provides pressure relief in 135 x 173 mm, leak-tight, corrosive-resistant package; sizes down to 64 x 94 mm are available upon request. Pressure ratings range from 3,000–15,000 psid, and construction is of NACE-compliant Incoloy 825 and Inconel 625. Operating up to 450°F, plugs exhibit tolerance of ±10% rated burst pressure and operate up to 80% of rated burst pressure.
Plug-In, 2-Port HDI Soleniod Valve weighs less than 2.5 g.Lee Products Ltd Buckinghamshire, SL9 9QE
Oct 04, 2013 Featuring 2-port NC design, high density interface (HDI) solenoid valve has overall length of 27.2 mm and diameter of 7.1 mm. Available options provide flow capacity (on air) from 4.4 SLPM @ 10 psid with Cv = 0.013 up to 14.6 SLPM @ 10 psid with Cv = 0.044. Supporting operation from 40 to 120°F for OEM, laboratory, scientific, and medical device applications, valve has internal volume of 28 µL and operating pressure range of 10 psi differential with inlet pressures from vacuum to 45 psig.
Inlet Safety Screens comply with NACE MR0175/ISO 15156.Lee Products Ltd Buckinghamshire, SL9 9QE
Oct 23, 2012 Made entirely of MP35N nickel cobalt based alloy, HI-BAR® Safety Screens are suited for harsh duty applications found in oil and gas industries. One-piece design enables screens to withstand pressure differentials up to 7,500 psi without rupture. Available in 6 flange sizes and 8 hole sizes ranging from 0.002–0.020 in. in diameter, screens resist crevice corrosion and stress corrosion cracking, enabling use in chemical and food processing, medical, and marine industries.
Solenoid Dispensing Pump features flexible design.Lee Products Ltd Buckinghamshire, SL9 9QE
Mar 28, 2012 Consuming 2.5 W for either 12 or 24 V operation, LPL2 provides standard dispense volumes of 50 µL dispense per shot. Port head design allows both tubing connections and manifold mounting for design flexibility. Designers can test fluidic system using connections to soft 1/16 in. tubing, then manifold mount the pump using standard O-rings once system design has been finalized. Electrical interface features contoured end-cap, which provides secondary connector retention.
Check Valves comply with NACE material standards. .Lee Products Ltd Buckinghamshire, SL9 9QE
May 03, 2011 Available in 5 sizes from .125-.500 in. diameter with MP35N poppet and seat, High-Pressure Check Valves are constructed from corrosion-resistant materials that are compliant with NACE MR0175/ISO 15156 standards. Units are designed for checked direction pressures up to 15,000 psid, and are available in free flow forward and free flow reverse directions, with cracking pressures of 5±3 and 1+0.5 psid. Free flow Lohm rates range from 400 down to 15 Lohms.
Solenoid Valve weighs just 4.5 grams.Lee Products Ltd Buckinghamshire, SL9 9QE
Mar 03, 2011 Available in either plug-in or face mount models, High Density Interface Solenoid Valve offers choice of configurations, including 2-way Normally Closed and 2-way Normally Open. Unit features operating pressure range of 0-50 psid and flow capacity of 19 slpm at 50 psid with Cv of 0.022. Operating from 40-120°F, valve has PPA, PBT, 316 SS, 430F SS, FKM, and epoxy wetted materials.
Atomizing Nozzles deliver precise spray pattern.Lee Products Ltd Buckinghamshire, SL9 9QE
Apr 23, 2010 Available in both airless and air-assisted styles, Atomizing Spray Nozzles generate precise 50° hollow cone spray pattern to ensure controlled atomization. Airless models do not require external air supply and will atomize with pressures as low as 10 psi. Air-assisted models, utilizing external air source to control atomization, allow for operating pressure down to 5 psi. Pressure of liquid and air can be independently controlled to fine-tune flow rate.
Micro Nozzles are suited for wash down applications.Lee Products Ltd Buckinghamshire, SL9 9QE
Jul 23, 2009 Constructed entirely from 303 and 304 stainless steel, micro wash down nozzles are designed for washing cuvettes, test tubes, 96 well plates and laboratory receptacles as well as purging / drying gas chambers. Units are 6 in. long, feature 0.062 Minstac fitting at one end and have total nozzle restriction of 1,800 LW. They are available in 2 versions: one with ten 0.010 in. dia holes and one with twenty 0.007 in. dia holes.
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|