Latest New Product News from Rehm Thermal Systems
Reflow Oven serves flexible EMS providers, OEM in-sourcers.Rehm Thermal Systems Blauberen,
May 15, 2013 Addressing needs of US electronics assembly industry as well as end-users with mixed volumes and diverse products, VisionXC fosters usability and facilitates maintenance while contributing to conservation of energy and nitrogen consumption. Thermal control ensures process stability required for reliable solder results, while flux management system maintains clean process chamber and clean environment outside. Convection reflow oven comes in 4 Special Editions with 7–10 zones.
Soldering System is built for operational versatility.Rehm Thermal Systems Blauberen,
May 27, 2011 CondensoX series lets users adapt vapor phase soldering to manufacturing conditions. Utilizing range of handling variants, system ensures void-free soldering can be achieved in any SMD manufacturing system. Condensation reflow soldering system employs hermetically locked vacuum chamber and meets challenges of Pb-free solder alloys for small and high thermal mass PCBs. Without moving assembly during soldering process, CondensoX combines vacuum profiling and thermal profiling in one machine.
Convection Reflow Ovens employ advanced cooling technology.Rehm Thermal Systems Blauberen,
Mar 12, 2010 Vision Series employs fans in individual zones, available with separate speed/volume control, that can cool lead-free processed PCBAs to below 50°C. Depending on system length, cooling area in VisionXP is laid out in 2, 3, or 4 stages. System also provides precise cooling gradients critical to reduce thermal stress and resulting board twist/warp. Bottom-side cooling configuration is also available to ensure homogenous cool-down of large thermal mass PCBs.
Drying Systems use thermal oxidation to stop contamination.Rehm Thermal Systems Blauberen,
Oct 27, 2009 RDS Drying Systems offer thermal oxidation process designed to eliminate challenge of residue contamination stemming from photovoltaic metallization in order to minimize maintenance and provide cleaner process chamber. Process involves heating gas to temperature greater than 500°C, while arrangement of heater and granulate pack lend to space and energy consumption reduction. In order to oxidize hydrocarbons, catalyzers are installed downstream from heating chamber.
Drying Systems are intended for solar cell metallization.Rehm Thermal Systems Blauberen,
Jul 16, 2009 Along with belt speeds to 6 m/min and max throughput of up to 5,700 wph, RDS 2100 and RDS 3000 offer process and thermal control features that enable PV manufacturers to promote efficiency and yield. Drying process combines either 5 or 7 IR zones and one central convection zone, delivering temperature profiling adjustable for precision and flexibility. Horizontal throughput systems ensure safe transport through oven via mesh belt or pin chain for up to 3 lanes.
Fast Fire Furnaces meet solar cell metallization needs.Rehm Thermal Systems Blauberen,
Jul 13, 2009 Featuring transport speeds up to 6 m/min and multiple lanes, RFS Firing System and RFS-D combination Drying and Firing System promote efficiency and yield for PV manufacturers. Flexible transport systems enable 1-, 2-, and 3-lane handling of wafers, while separate heating and cooling zone transports optimize cooling gradient and shorten necessary cooling zone length. Other features include residue management system, profile control and process monitoring, as well as gas management.
Soldering System combines lead-rich and lead-free soldering.Rehm Thermal Systems Blauberen,
Apr 01, 2009 Equipped with 2 conveyor lanes that can be operated asynchronously at different speeds, Dual Lane Vision X Series enables simultaneous lead-rich and lead-free reflow soldering. Conveyors can be loaded with diverse PCBs printed with different solder pastes. Available with air or nitrogen atmosphere, convection soldering system includes integrated residue management system and ovens with homogenous, non-separated heating and cooling zones across width of conveyor.
Convection Reflow Oven uses flux residue management system.Rehm Thermal Systems Blauberen,
Jan 23, 2009 VisionXP employs complete flux residue management system, which combines pyrolysis action mechanisms in preheating and peak zones with cold condensation in cooling zone. Complex molecules are broken down into simpler substances via temperatures from 500 to 900°C in anaerobic environment to avoid burning. Liquid residues and crystalline residues are thus reduced, resulting in optimal efficiency by providing cleaner process chamber and 12 month maintenance intervals.
Other Company News From Rehm Thermal Systems
May 03, 2013
Rehm Rewarded Again at Nepcon Shanghai!
Apr 11, 2013
Rehm Thermal Systems Show VisionXP+ for the First Time at SMT
Mar 22, 2013
We Win the NPI Award for Our Quad Lane Reflow Oven at Apex
Feb 01, 2013
Rehm Wins New Product Innovation Award at Apex
Jan 10, 2013
A Wide World of Soldering Solutions from Rehm
Jan 01, 2013
Rehm Thermal Systems Announces Three Next-generation Soldering Solutions
Oct 05, 2012
Rehm: Still the Single Source for Convection and Condensation Reflow
Sep 20, 2012
Rehm Increase Efficiency and Productivity for MELECS for 15 Years
May 29, 2012
Rehm Helps Tectron Efficiently Reduce Noise Levels!
May 22, 2012
Rehm Help Tectron Efficiently Reduce Noise Levels!
Mar 27, 2012
Rehm Support the Supply Demands of the VisionXC with Their Production Facility in Dongguan, China
Nov 01, 2011
Quanta Computer Invests in Rehm's Productivity-boosting Convection Reflow System
Nov 01, 2011
Zollner Electronics Invest in Rehm's VisionXP System to Support Their Expansion into the USA
Oct 28, 2011
Rehm Thermal Systems to Display Their Innovative Range of Systems and Technologies at Productronica 2011
Sep 01, 2011
Rehm Thermal Systems Scoops Solar Industry Award for Innovative Thermal Oxidation Process
Aug 12, 2011
Rehm Prepares to Launch New Locally-built Convection Soldering System at Nepcon Shenzhen, Stand 1H38
Aug 01, 2011
Rehm Delivers Its 3000th Soldering System!
Jun 29, 2011
Over 1000 Low-maintenance Rehm VisionX Convection Reflow Systems in the Field
May 03, 2011
Rehm Thermal Systems Exhibiting at Nepcon China 2011
Apr 26, 2011
Rehm Thermal Systems at SMT/Hybrid/Packaging 2011
Apr 01, 2011
Aussie Hi-Mix EMS Specialist ON-Track Selects Rehm Thermal Systems
Mar 17, 2011
Rehm to Showcase Convection & Condensation Soldering Expertise at Apex
Mar 11, 2011
Rehm Thermal Systems Share Valuable Experience with Manufacturers at Solar Seminar
Sep 29, 2010
Rehm Thermal Systems to Celebrate 20 Years of Innovation with Forthcoming Technology Days
Aug 13, 2010
EU PVSEC 2010 in Valencia - Rehm Thermal Systems Shows Solar Equipment for Metallization Lines
Apr 16, 2010
Rehm Thermal Systems Showcases New Fast-Firing and Drying Technologies at Photon 2010, Hall 4, Stand G39
Apr 07, 2010
Rehm Thermal Systems Will Showcase Advanced Drying and Firing Processes for Solar Cell Metallization at SNEC
Apr 01, 2010
Rehm Thermal Systems America to Begin User-Specific Condensation Reflow Process Characterizations
Oct 28, 2009
Rehm Thermal Systems Drive Energy Efficiency to Unlock Cost-of-Ownership Advantage
Oct 13, 2009
Rehm Thermal Systems Will Highlight Advanced Soldering & Solar Solutions at Productronica, Booth A4.341
Sep 09, 2009
Rehm Thermal Systems Showcases New Fast-Firing and Drying Technologies at EUPVSEC 2009, Booth B5/45
Aug 20, 2009
Rehm Thermal Systems Visu2 Software Brings New Best-in-Class Capabilities to Solar Cell Metallization
Jan 28, 2009
Rehm Thermal Systems to Showcase Convection and Condensation Soldering Innovation at APEX 2009
Jan 01, 2009
Rehm Thermal Systems to Showcase New Vacuum Vapor Phase Reflow Technology at Internepcon Japan
|Home | My ThomasNet News® | Industry Market Trends® | Submit Release | Advertise | Contact News | About Us|
Brought to you by Thomasnet.com
Browse ThomasNet Directory|