Products in the News

Press Release Summary:

September 1, 2016 - Burlington, New Jersey, USA. Dishwashers, washers and dryers, refrigerators, mixers, blenders, and many other appliances have rubber or soft plastic components such as hoses, O-rings, seals, grommets, plugs and more. The slip resistance of these parts makes assembly difficult. P-80® temporary rubber assembly lubricants significantly reduce friction helping these parts slide easily into place.

P-80® lubricants are water-based, and do not contain alcohol or petroleum distillates so they will not cause rubber to dry out or harden. P-80® does not contain silicone or other persistent ingredients, so once dry you have a tight fitting part.

P-80® lubricants come in a broad range of formulas and sizes to meet all appliance assembly needs. Two, P-80® Emulsion IFC and P-80® THIX IFC, are approved for Incidental Food Contact applications (meeting FDA regulation 21 CFR 178.3570) and are registered with NSF as USDA H1 lubricants.

P-80 lubricants enable rubber parts to slide easily into place with minimal force. Once dry, P-80 stops lubricating and parts remain in place, resulting in a tight fit. Since P-80 does not contain silicon or any other persistent ingredients, once dry the slipping action goes away.

Advantages of using P-80 lubricants:

  • Reduces force required for installation
  • Increases production rates
  • Reduces part breakage and rejects
  • Allows for closer fitting part design
  • Reduces risk of musculoskeletal and slippage related injuries
  • Safe and Ready-to-Use
Comparison of P-80® Formulas International Products Corporation U.S. Manufacturing Headquarters

201 Connecticut Drive
Burlington, NJ 08016 USA
Phone: 609-386-8770
Fax: 609-386-8438
Email: mkt@ipcol.com

International Products Corporation
European Office
Unit 5, Green Lane Business Park
238 Green Lane
London SE9 3TL, United Kingdom
Phone: 0208-857-5678
Fax: 0208-857-1313
Email: saleseurope@ipcol.com

Media Contact:
Michele Christian
Director of Marketing
Phone: 609-386-8770
Fax: 609-386-8438
mchristian@ipcol.com

About International Products Corporation: International Products Corporation (IPC), founded in 1923, manufactures specialty cleaners and temporary assembly lubricants at their ISO:9001 certified facility in Burlington, NJ. They are equipped with state-of-the-art manufacturing, packaging, and warehousing equipment, and an on-site laboratory for quality, analytical work, and research and development. IPC is dedicated to providing safe, high-quality cleaners and lubricants. All of IPC’s products are made in the USA and are readily available worldwide.

International Products Corp. - Burlington, NJ

Original Press Release

P-80® Lubricants are Ideal for Appliance Assembly and Service

Press release date: September 1, 2016

Burlington, New Jersey, USA. Dishwashers, washers and dryers, refrigerators, mixers, blenders, and many other appliances have rubber or soft plastic components such as hoses, O-rings, seals, grommets, plugs and more. The slip resistance of these parts makes assembly difficult. P-80® temporary rubber assembly lubricants significantly reduce friction helping these parts slide easily into place.

P-80® lubricants are water-based, and do not contain alcohol or petroleum distillates so they will not cause rubber to dry out or harden. P-80® does not contain silicone or other persistent ingredients, so once dry you have a tight fitting part.

P-80® lubricants come in a broad range of formulas and sizes to meet all appliance assembly needs. Two, P-80® Emulsion IFC and P-80® THIX IFC, are approved for Incidental Food Contact applications (meeting FDA regulation 21 CFR 178.3570) and are registered with NSF as USDA H1 lubricants.

P-80 lubricants enable rubber parts to slide easily into place with minimal force. Once dry, P-80 stops lubricating and parts remain in place, resulting in a tight fit. Since P-80 does not contain silicon or any other persistent ingredients, once dry the slipping action goes away.

Advantages of using P-80 lubricants:
  • Reduces force required for installation
  • Increases production rates
  • Reduces part breakage and rejects
  • Allows for closer fitting part design
  • Reduces risk of musculoskeletal and slippage related injuries
  • Safe and Ready-to-Use
Comparison of P-80® Formulas International Products Corporation U.S. Manufacturing Headquarters

201 Connecticut Drive
Burlington, NJ 08016 USA
Phone: 609-386-8770
Fax: 609-386-8438
Email: mkt@ipcol.com

International Products Corporation
European Office
Unit 5, Green Lane Business Park
238 Green Lane
London SE9 3TL, United Kingdom
Phone: 0208-857-5678
Fax: 0208-857-1313
Email: saleseurope@ipcol.com

Media Contact:
Michele Christian
Director of Marketing
Phone: 609-386-8770
Fax: 609-386-8438
mchristian@ipcol.com

About International Products Corporation: International Products Corporation (IPC), founded in 1923, manufactures specialty cleaners and temporary assembly lubricants at their ISO:9001 certified facility in Burlington, NJ. They are equipped with state-of-the-art manufacturing, packaging, and warehousing equipment, and an on-site laboratory for quality, analytical work, and research and development. IPC is dedicated to providing safe, high-quality cleaners and lubricants. All of IPC’s products are made in the USA and are readily available worldwide.


Comments

comments powered by Disqus