Thermally Conductive, Two Component Epoxy Passes USP Class VI Tests and ISO 10993-5 Specifications


With biocompatibility and cytotoxicity certifications, Master Bond EP21AOLV-2Med is often selected for bonding, sealing, coating and encapsulation applications in the medical device industry. This two component epoxy system withstands a variety of sterilization methods, including EtO, radiation and many cold sterilants.



EP21AOLV-2Med is thermally conductive and electrically isolating with a smooth consistency and good flow properties. It bonds well to metals, composites, glass, ceramics, plastics and many rubber materials. This dimensionally system offers a high tensile modulus of 450,000-500,000 psi, a compressive strength exceeding 18,000 psi and very low shrinkage upon curing. EP21AOLV-2Med's viscosity and low coefficient of thermal expansion enable it to be suitable for potting and encapsulation applications. It also resists many chemical including water, oils and fuels. This medical grade product is serviceable over the temperature range of -60°F to +250°F.



Featuring a one to one mix ratio by weight, a 100 gram batch of EP21AOLV-2Med has a working life of 4-6 hours at room temperature. Part A is gray and Part B is off-white, which further simplifies mixing. It can be easily applied with a spatula, knife, trowel, brush or paint roller.



This system cures at room temperature or more rapidly with the addition of heat. EP21AOLV-2Med has a shelf life of 6 months in its original, unopened containers and is available in ½ pint kits, pint kits, quart kits, gallon kits and 5 gallon kits.



Master Bond Electrically Insulative Epoxy Systems



Master Bond EP21AOLV-2Med meets USP Class VI and ISO 10993-5 specifications for medical device applications. It is thermally conductive and a competent electrical insulator. Read more about Master Bond's electrically insulative systems at http://www.masterbond.com/properties/electrically-insulative-adhesive-systems or contact Tech Support. Phone: +1-201-343-8983 Fax: +1-201-343-2132 Email: technical@masterbond.com.



For a full product description, please visit: http://www.masterbond.com/tds/ep21aolv-2med

Check out new videos on our YouTube channel: http://www.youtube.com/user/MasterBondVideo



You can embed any of our videos on your website.



Contact

James Brenner

Marketing Manager

Email: jbrenner@masterbond.com

Tel: +1-201-343-8983

Fax: +1-201-343-2132



MASTER BOND INC.

154 Hobart Street

Hackensack, NJ 07601-3922

Web: www.masterbond.com


Contact This Company

All Topics