Products in the News

Stainless Can Seaming Machines for All Requirements

Share Like Tweet Add Email

Lanico Inc

156 S. Lawrence St., Mobile, AL, 36602, USA

Original Press Release

Stainless Can Seaming Machines for All Requirements

Press release date: February 14, 2014

Stainless can seaming machines for all requirements

LANICO enters the big stage interpack (May 08 to 14, 2014) to present a range of fully stainless can seaming machines. The efficient equipment suitable for a wide range of customer requirements will also be shown in operation to visitors at the booth (Hall 11, booth A41). 

The equipment presented at this year's interpack reflects the vast experience LANICO gained having manufactured and supplied more than 100,000 seaming machines for dry, fluid and pasty products. The fully automatic model V110 SVA 50 T is predestined for low volume production and laboratory applications. The stainless and splashproof machine can operate as a stand-alone unit or in combination with a filling-machine. It is the optimal solution for powdery or chunky products, such as milk powder, pastries or pasties. By means of four seaming rollers, production speeds of up to 3,000 cans per hour can be reached. The V110 SVA 50 T is highly versatile due to a wide working range from 45 up to 250 millimetres height and from 56 up to 113 millimetres diameter. The change parts are designed to enable change-overs to be done very quickly. Height changes can be performed in less than two minutes. The seaming rollers are mounted and preset on a special lever system. When a diameter change is carried out the whole lever system is exchanged to avoid the normal lengthy set-up time of the seaming rollers. Thus diameter changes can be performed in less than ten minutes. The frequency-controlled motor drive ensures a smooth start-up, the cans and ends are fed automatically. The machine can be easily controlled via touch panel. For processing oxygen-sensitive products it can optionally be equipped with a gas injection system.

Highly-efficient semi-automatic can seamers
The stainless semi-automatic can seaming machine V 110 PH is the right solution for butcher shop, laboratory and general canning applications. It proves its reliability both in wet and dry operation and reaches production speeds of up to 850 cans per hour. The V 110 PH processes cans from 42 up to 163 millimetres diameter. The adjustment system permits height changes in a range between 26 and 300 millimetres. Thanks to preset change parts, diameter changes can be carried out in a few minutes and with repeated precision. Additional features are the automatic seaming system by means of seaming rollers with heavy duty bearings and the height-independent pneumatic can clamping adjustment. By use of a roller carriage, the low-maintenance machine can be flexibly used within production.

The stainless and splashproof semi-automatic can seaming machine V 10 ECO offers excellent value for money. As an entry-level model, the machine is ideally suited for wet and dry operation for example in craft businesses, for small industrial production as well as laboratory applications. It features a working range from 26 up to 120 millimetres height and from 73 up to 113 millimetres diameter. Two seaming rollers perform an airtight double seam. Thus up to 600 cans per hour can be reliably seamed. Can height adjustments are carried out automatically whereas diameter changes are also completed within a short period of time using the special preset lever systems. For easy and quick format changes, the seaming rollers are mounted and preset on a special lever system. The exchange of the seaming chuck and the base plate is completed in no time as well. An additional feature of the low-maintenance machine is its hygienic and ergonomic design. A roller carriage permits highly-flexible usage of the V 10 ECO within production. 

For almost 100 years LANICO Maschinenbau Otto Niemsch GmbH, based in Braunschweig (Germany), produces various forms of innovative packaging machines for the can making and canning industry. Today LANICO is among the leaders in the field of general line can equipment. Particularly for the production of aerosol and rectangular cans, LANICO is one of the leading suppliers of necking, flanging and seaming machines as well as complete production lines.

For more information on LANICO's entire product range in various languages, including Chinese and Russian, see www.lanico.de.
  
Company contact
LANICO Maschinenbau
Otto Niemsch GmbH
Michael Kaufmann
Technical Director
Broitzemer Strasse 25-28
38118 Braunschweig
Deutschland
Tel. +49 53 18 090 614
Fax +49 53 18 090 627
kaufmann@lanico.de

Share Like Tweet Add Email

LIKE THIS ARTICLE? DON’T MISS OUT ON OTHERS! Get Thomasnet’s industry newsletter now

Comments

comments powered by Disqus