SARPOM and Jayhawk Pipeline Recognized for Pioneering Use of GE Oil & Gas' New MagneScan(TM) MFL Pipeline Inspection Technology |
SARPOM and Jayhawk Pipeline Recognized for Pioneering Use of GE Oil & Gas' New MagneScan(TM) MFL Pipeline Inspection Technology
|
|
Click Here to Enlarge Picture
|
|
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
GE Oil & Gas
3135 Easton Turnpike
Fairfield,, CT, 06828-0001
USA
Press release date: June 22, 2009
MagneScan(TM) Completes First 250 Miles of Pipeline Inspection on Both Sides of the Atlantic
HOUSTON, TEXAS-June 22, 2009-GE Oil & Gas' PII Pipeline Solutions business has presented recognition awards to two of its valued customers following their pioneering use of MagneScan(TM), the next generation of MFL (magnetic flux leakage) pipeline inspection technology, now proven on both sides of the Atlantic.
SARPOM, Exxon Mobil's Affiliate Refinery and Pipelines Company in Italy, and Jayhawk Pipeline, the U.S. pipeline operator, were recognized for projects successfully completed in the first quarter of 2009. Representatives of SARPOM received the GE award in Cramlington, U.K., GE's Centre of Excellence for Magnetics, while Jayhawk was presented with the award at GE's Biannual North American Pipeline Conference in Austin, Texas.
The SARPOM inspection in Italy was from Trecate to Malpensa Intercontinental Airport (Northwest region) on a 6-inch diameter jet-fuel pipeline, spanning almost 20.5 miles. The line was last inspected in 2003. The scope of work implemented by GE was to detect corrosion, dents and bends, as well as mapping coordinates acquisition. The inspection was successfully completed in just four hours and 45 minutes, with the expert field support of TECMA Pipeline Services, GE's partner in Italy. Sarpom operates a network of 720 miles of liquid pipelines in Italy.
Giorgio Tencaioli, Pipeline Integrity Supervisor for SARPOM Italia, said: "'To inspect this seamless steel pipeline, partially built in the early 1960s, we had three priorities: we needed the combination of three tools in one, to reduce disruption to our operation; we also needed a very short arrangement of the system due to space restriction at the airport, and we wanted better corrosion assessment than was offered by previously available technology. We also had been waiting for a credible 6-inch mapping capability.''
The first new MagneScan inspection project in North America was performed for the National Cooperative Refinery Association (NCRA) in the state of Kansas and consisted of four sections of 6-inch products pipeline, spanning a total length of 227.5 miles. A U.S. company formed in 1943, NCRA operates an 85,000-barrel-per-day refinery, located in McPherson, Kansas, as well the 227.5 mile, refined-products pipeline that runs from the refinery to Council Bluffs, Iowa.
Jayhawk Pipeline, L.L.C., which is 100 percent owned by NCRA, transports approximately 125,000 barrels per day of crude oil through 800 miles of pipeline. KAW Pipeline Company, 67 percent owned by NCRA, transports approximately 30,000 barrels per day of crude oil through 250 miles of pipeline.
Mark Graves, Pipeline Engineer at Jayhawk Pipeline said: "The four, 6-inch pipeline segments were 49, 60, 58, and 60.5 miles respectively, and each run was completed in less than 24 hours in standard configuration. One of our requirements was related to the product speed inside the line, making the run time at the upper specification of the battery life of the tool. This was, therefore, an excellent testing ground for this new technology."
"We are very proud to have such strong partnerships with pipeline operators worldwide who trust GE to deliver leading-edge technology to secure the safe and productive future of their asset. Combined inspection runs mean less digs, less operational disruption and reduced impact on the environment for cost-efficient compliance," said John Bucci, General Manager of GE Oil & Gas' PII Pipeline Solutions.
Launched at the International Pipeline Conference in Calgary in September 2008, the new MagneScan inspection tool simultaneously maps the pipeline and checks it for corrosion, using high resolution MFL sensors that deliver high-quality data to identify and locate metal loss and is suitable for GIS (geographic information systems) analysis. Mapping data is integrated with inspection information during the run, reducing the amount of post-processing required.
About GE Oil & Gas
GE Oil & Gas (www.ge.com/oilandgas) is a world leader in advanced technology equipment and services for all segments of the oil and gas industry, from drilling and production, LNG, pipelines and storage to industrial power generation, refining and petrochemicals. We also provide pipeline integrity solutions, including inspection and data management. As part of our 'Innovation Now' customer focus and commitment, GE Oil & Gas leverages technological innovation from other GE businesses, such as aviation and healthcare, to continuously improve oil and gas industry performance and productivity. GE Oil & Gas employs more than 12,000 people worldwide and operates in over 70 countries.
About GE
GE is a diversified global infrastructure, finance and media company that is built to meet essential world needs. From energy, water, transportation and heal to access to money and information, GE serves customers in more than 100 countries and employs more than 300,000 people worldwide. For more information, visit the company's Web site at http:///www.ge.com. GE is Imagination at Work.
For more information contact: Nigel O'Connor GE Oil & Gas t: +44 20 7302 6941 e: nigel.o'connor@ge.com
Laure Brooks e: laure.brooks@ge.com
Ken Darling Masto Public Relations t: +1 518 786 6488 e: kenneth.darling@ge.com
Tom Murnane Masto Public Relations t: + 1 518 786 6488 e: tom.murnane@mastopr.com
Attention Editor e: information@mastopr.com
|
|
|
|
|
|
| 
