ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

PCB Industry Report shows overall decrease in November 2009.

Print | 
Email |  Comment   Share  
December 29, 2009 - November 2009 findings of North American PCB Statistical Program indicated declines in both rigid and flexible PCB shipments and bookings from November 2008 (rigid only), for year to date, and compared to previous month. However, flexible circuit bookings increased 31.9% compared to November 2008. While book-to-bill ratio for North American rigid PCB industry in November 2009 registered 1.07, North American flexible circuit book-to-bill ratio in November 2009 climbed to 1.02.

IPC Releases PCB Industry Results for November 2009


(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

IPC-Association Connecting Electronics Industries
3000 Lakeside Drive
Bannockburn, IL, 60015
USA



Press release date: December 28, 2009

BANNOCKBURN, Ill., USA - IPC - Association Connecting Electronics Industries® announced today the November findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.

PCB Industry Growth Rates and Book-to-Bill Ratios Announced Rigid PCB shipments declined 11.3 percent and bookings were down 4.1 percent in November 2009 from November 2008. Year to date, rigid PCB shipments were down 24.8 percent and bookings fell by 21.3 percent. Compared to the previous month, rigid PCB shipments declined 2.6 percent and rigid bookings decreased 6.8 percent. The book-to-bill ratio for the North American rigid PCB industry in November 2009 registered 1.07.

Flexible circuit shipments in November 2009 went down 3.5 percent and bookings increased 31.9 percent compared to November 2008. Year to date, flexible circuit shipments were down 1.1 percent and bookings were down 2.4 percent. Compared to the previous month, flexible circuit shipments went down 12.9 percent and flex bookings fell by 3.4 percent. The North American flexible circuit book-to-bill ratio in November 2009 climbed to 1.02.

For rigid PCBs and flexible circuits combined, industry shipments in November 2009 decreased 10.8 percent from November 2008, and orders booked decreased 2.2 percent from November 2008. Year to date, combined industry shipments were down 23.3 percent and bookings were down 20.1 percent. Compared to the previous month, combined industry shipments for November 2009 decreased 3.4 percent and bookings went down 6.6 percent. The combined (rigid and flex) industry book-to-bill ratio in November 2009 slipped slightly to 1.07, but remains strongly positive.

"The negative year-on-year growth rates in PCB sales continue to improve and orders are still outpacing sales - both good signs for the future," said IPC President Denny McGuirk. "We typically see a slowdown in November sales as the holiday-related demand tapers off. Most encouraging is that the book-to-bill ratio has been in the positive range for seven straight months, which indicates strengthening demand."

The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC's survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next two to six months.

Book-to-bill ratios and growth rates for rigid PCBs and flexible circuits combined are heavily affected by the rigid PCB segment. Rigid PCBs represent an estimated 91 percent of the current PCB industry in North America, according to IPC's World PCB Production and Laminate Market Report.

The Role of Domestic Production IPC's monthly survey of the North American PCB industry tracks bookings and shipments from U.S. and Canadian facilities, which provide indicators of regional demand. These numbers do not measure U.S. and Canadian PCB production. To track regional production trends, however, IPC asks survey participants for the percent of their reported shipments that were produced domestically (i.e., in the USA or Canada). In November 2009, 79 percent of total PCB shipments reported were domestically produced. Domestic production accounted for 79 percent of rigid PCB and 87 percent of flexible circuit shipments in November by IPC survey participants. These numbers are significantly affected by the mix of companies in IPC's survey sample, which may change slightly in January, but are kept constant through the calendar year.

Bare Circuits versus Assembly Flexible circuit sales typically include value-added services such as assembly, in addition to the bare flex circuits. In November, the flexible circuit manufacturers in IPC's survey sample indicated that bare circuits accounted for approximately 73 percent of their shipment value reported for the month. Assembly and other services make up a large and growing segment of flexible circuit producers' businesses. This figure is also sensitive to changes in the survey sample, which may occur at the beginning of each calendar year.

Interpreting the Data Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they may reflect cyclical effects. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month may not be significant unless a trend of three consecutive months or more is apparent. It is also important to consider changes in bookings and shipments to understand what is driving changes in the book-to-bill ratio.

The information in IPC's monthly PCB industry statistics is based on data provided by a representative sample of both rigid and flexible PCB manufacturers in the USA and Canada. IPC publishes the PCB Book-to-Bill Ratio and the PCB Statistical Program Report each month. Statistics for the previous month are not available until the last week of the following month.

About IPC IPC (www.ipc.org) is a global trade association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 2,700 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $1.7 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Arlington, Va.; Garden Grove, Calif.; Stockholm, Sweden; Moscow, Russia; and Shanghai and Shenzhen, China.
Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


 

Post a comment about this story

Name:
E-mail:
(your e-mail address will not be posted)
Comment title:
Comment:
To submit comment, enter the security code shown below and press 'Post Comment'.
 



 See related product stories
More .....
 See more product news in:
Services
 More New Product News from this company:
Scientific RoHS Revision Decision was praised by IPC.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
New IPC DVD Provides Training on FOD Prevention
IPC Releases Annual Electronics Assembly Quality Benchmark Study
IPC PERM Council Addresses Lead-Free Concerns in High-Reliability Electronics
IPC Mourns Loss of Industry Icon, Pioneer and Friend
IPC and HKPCA Renew Show Partnership for Next Four Years
More ....
 Tools for you
Watch Company 
View Company Profile
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Trade Associations


Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by Thomasnet.com        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy



Error close

Please enter a valid email address