Latest Green Building Standard now available.January 31, 2012 -
ANSI/ASHRAE/USGBC/IES Standard 189.1-2011, Standard for the Design of High-Performance, Green Buildings Except Low-Rise Residential Buildings, provides green building foundation for those who strive to design, build, and operate high performance buildings. It covers key topic areas of site sustainability, water-use efficiency, energy efficiency, indoor environmental quality, and building's impact on atmosphere, materials, and resources.
2011 Version of the Green Standard Now Available from ASHRAE, USGBC, IES |
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
American Society of Heating, Refrigerating and Air Conditioning Engineers
1791 Tullie Circle, N.E.
Atlanta, GA, 30329
USA
Press release date: January 30, 2012
ATLANTA - Changes to help make buildings and systems more sustainable are part of the newly published version of the high performance green building standard from ASHRAE, the U.S. Green Building Council (USGBC) and the Illuminating Engineering Society (IES)
ANSI/ASHRAE/USGBC/IES Standard 189.1-2011, Standard for the Design of High-Performance, Green Buildings Except Low-Rise Residential Buildings, provides a green building foundation for those who strive to design, build and operate high performance buildings. It covers key topic areas of site sustainability, water-use efficiency, energy ef¬ficiency, indoor environmental quality and the building's impact on the atmosphere, materials and resources. When first introduced in 2009, the standard was the first code-intended commercial green building standard in the United States.
"Since Standard 189.1 was first published, we have received much input from the industry offering suggestions on how to strengthen it in all areas," chair Dennis Stanke said. "This 2011 version incorporates much of that input. More importantly, the 2011 version incorporates updated connections to its referenced standards - primarily ANSI/ASHRAE/IES 90.1-2010 and ANSI/ASHRAE 62.1-2010. Compliance with these updated provisions will result in further improvements to indoor environmental quality, while further reducing energy use and environmental impact through high-performance building design, construction and operation."
The most significant change in energy-related provisions results from new requirements in ANSI/ASHRAE/IES Standard 90.1-2010, Energy Standard for Buildings Except Low-Rise Residential Buildings, adding to and superseding requirements in the 2007 version. In October 2011, the U.S. Department of Energy found that the 2010 version of Standard 90.1 contains significant energy savings over the 2007 standard. The energy savings in the Standard 90.1-2010 provisions also result in energy savings for building projects complying with Standard 189.1, according to Stanke.
In addition, mandatory and prescriptive renewable energy requirements were clarified to reduce confusion and simplify calculations; now both mandatory provisions to prepare for on-site renewable energy and provisions to produce prescribed levels of renewable energy must be met. Additionally, buildings that meet the prescriptive requirement for renewable energy production are now deemed to comply with the mandatory requirement for renewable energy site-preparation.
The standard also updates the performance option for energy efficiency (Appendix D) so that it refers to Appendix G of Standard 90.1-2010, which is now a normative appendix. Appendix G of 90.1 applies to projects seeking to reduce annual energy cost more than would be possible by merely meeting the requirements of that standard. Appendix D in Standard 189.1, on the other hand, provides a performance option for compliance as an alternative to the less-complex prescriptive option; it must show that the project design results in annual energy cost equal to or less than would be possible by meeting the mandatory plus prescriptive requirements of the standard, according to Stanke.
Additional changes to the 2011 standard include:
o More stringent Lighting Power Density allowances due to the change in reference to Standard 90.1-2010. Both interior and exterior values are now set as a percentage of the Standard 90.1 allowances, based on building, space or area type.
o Automatic controls are now required for lighted signs visible during daytime hours; controls must reduce the lighting power to 35 percent of full power. For other outdoor signs, automatic controls must now turn off lighting during daytime hours and reduce the lighting power to 70 percent of full power after midnight.
o Open-graded (uniformed size) aggregate and porous pavers (e.g., open-grid pavers) qualify as a hardscape surface for heat island mitigation with no further testing. Permeable pavement and permeable pavers must meet a minimum percolation rate rather than a minimum solar reflectance index (SRI).
Standard 189.1 is currently a jurisdictional compliance option in the International Green Construction Code developed by the International Code Council, ASTM International and the American Institute of Architects.
The cost of ANSI/ASHRAE/USGBC/IES Standard 189.1-2011, Standard for the Design of High-Performance, Green Buildings Except Low-Rise Residential Buildings, $119 ($99 ASHRAE members).
To order, contact ASHRAE Customer Contact Center at 1-800-527-4723 (United States and Canada) or 404-636-8400 (worldwide), fax 404-321-5478, or visit www.ashrae.org/bookstore.
ASHRAE, founded in 1894, is a building technology society with more than 50,000 members worldwide. The Society and its members focus on building systems, energy efficiency, indoor air quality and sustainability within the industry. Through research, standards writing, publishing and continuing education, ASHRAE shapes tomorrow's built environment today.
|
|
|
|
|
|
|
|
|
|
|
