Products in the News

Jet Edge Introducing Waterjet Cutting Systems for Farm Machine Shops at Triumph of Agriculture Exposition March 12-13

Share Like Tweet Add Email

Jet Edge

12070 43rd St. N.E., St. Michael, MN, 55376, USA

Original Press Release

Jet Edge Introducing Waterjet Cutting Systems for Farm Machine Shops at Triumph of Agriculture Exposition March 12-13

Press release date: January 14, 2014

FARM-JET® and TACH-JET® Waterjets Cut Parts from Virtually Any Material

ST. MICHAEL, Minnesota, U.S.A. — Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet cutting technology will introduce its new FARM-JET® and TACH-JET® waterjet systems at the Triumph of Agriculture Exposition, March 12-13 at Omaha's CenturyLink Center.  Look for Jet Edge in booth 2129.5/2129.6. 

Designed and priced for farm machine shops, Jet Edge's 55,000 psi FARM-JET® and TACH-JET® waterjets bring the power and versatility of ultra-high pressure waterjet cutting technology to farm machine shops for the price of a new fully loaded 1 ton 4X4 pickup truck, without requiring special electrical service.  These powerful machines cut parts from virtually any material without heat or flames, leaving a clean edge free of slag, without producing noxious fumes.

"Until now, if you wanted a waterjet, it meant a six-figure investment and access to 460 volt power," noted Jude Lague, Jet Edge president. "Now you can own a waterjet for the price of a new truck and you can run it off standard household electric. With a waterjet system, you can create a nice source of additional revenue, and if you need a part fast, you can cut it in minutes instead of waiting for days or weeks to have it fabricated and shipped."

FARM-JET® Waterjet System
FARM-JET® includes a 40"x40" waterjet cutting table and a Jet Edge Eco-Jet PTO direct drive waterjet pump that utilizes a tractor's PTO shaft to produce 1 gpm of 55,000 psi water. The system includes one abrasivejet cutting head and a motorized Z axis with 5 inches (130 mm) of travel.   

FARM-JET® is controlled with a Windows® PC (sold separately) and uses a FlashCut Pro-Series Stepper Controller and FlashCut CNC software.  It also includes IGEMS path generation software and a hand-held controller pendant for operator convenience. FARM-JET is available for 540 RPM and 1000 RPM PTO shafts and Category 1 and 2 three point hitches (tractor sold separately).  It requires a 115v 60 Hz or 230v 50Hz power source, fresh water source and a suitable tractor.

TACH-JET® Waterjet System
TACH-JET® includes a 40"x40" waterjet cutting table and a Jet Edge Eco-Jet TACH direct drive waterjet pump that that converts a tractor or skid steer's hydraulic power into 1 gpm of 55,000 psi water. The system includes one abrasivejet cutting head and a motorized Z axis with 5 inches (130 mm) of travel.   

TACH-JET® is controlled with a Windows® PC (sold separately) and uses a FlashCut Pro-Series Stepper Controller and FlashCut CNC software.  It also includes IGEMS path generation software and a hand-held controller pendant for operator convenience. It requires a hydraulic power unit capable of a minimum output of 50 HP (tractor or skid steer sold separately), a 115v 60 Hz or 230v 50Hz power source, and fresh water source.

Waterjet Technology Seminars
Learn more about ultra-high pressure waterjet cutting during Jet Edge's free seminars "Waterjet Cutting Technology for the Farm Machine Shop" at 10 a.m. March 12-13.  Jet Edge waterjet experts will provide a technical overview of Jet Edge's FARM-JET® and TACH-JET® systems and explain how waterjet can benefit farm machine shops by producing parts better, faster and cheaper, and by creating an additional revenue stream.

Find out more about Jet Edge at www.jetedge.com, or call 1-800-JET-EDGE (538-3343) or 763-497-8700.

About Jet Edge
Established in 1984, Jet Edge is a global designer and manufacturer of waterjet systems for precision cutting, surface preparation and coating removal. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers, machine and job shops.

Jet Edge, Inc. 
12070 43rd Street N.E. 
St. Michael, MN 55376-8427
U.S.A.
www.jetedge.com  
+1-763-497-8700 
800-JET-EDGE 
sales@jetedge.com

Contact:
Nancy Lauseng
Marketing Manager     
763-497-8726
 nancyl@jetedge.com

Jaimie Larson
Sales Marketing Assistant
763-497-8742
 jaimiel@jetedge.com

Share Like Tweet Add Email

LIKE THIS ARTICLE? DON’T MISS OUT ON OTHERS! Get Thomasnet’s industry newsletter now

Comments

comments powered by Disqus