ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

IPC revises SMT design and land pattern standard.

Print | 
Email |  Comment   Share  
July 28, 2010 - IPC has released IPC-7351B, Generic Requirements for Surface Mount Design and Land Pattern Standard, with updated guidance on requirements of land pattern geometries used with SMT electronic components, as well as design recommendations for achieving best possible solder joints. It also has new component families and lead forms that include microminiature flat-lead and no-lead components. Padstack standard naming convention and IPC-7351B Land Pattern Calculator(TM) on CD-ROM are included.

IPC Releases New Revision of Surface Mount Design and Land Pattern Standard


(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

IPC-Association Connecting Electronics Industries
3000 Lakeside Drive
Bannockburn, IL, 60015
USA



Press release date: July 21, 2010

BANNOCKBURN, Ill., USA - IPC - Association Connecting Electronics Industries® has released the B revision of IPC-7351, Generic Requirements for Surface Mount Design and Land Pattern Standard. The leading industry standard for surface mount land pattern design and layout, IPC-7351B provides designers and printed board fabricators with updated guidance on requirements of land pattern geometries used for the surface attachment of electronic components, as well as surface mount design recommendations for achieving the best possible solder joints.

"The new IPC-7351B standard introduces several new component families and lead forms that include micro-miniature flat-lead and no-lead components, and a new padstack standard naming convention," says Tom Hausherr, EDA library product manager, Mentor Graphics Corporation and member of the IPC 1-13 Land Pattern Subcommittee. "Overall, the IPC-7351B standard is a key publication in the electronics industry for accurate CAD library generation."

A major addition to IPC-7351B, the new padstack naming convention consists of combinations of letters and numbers that represent the shape or dimensions of lands on different layers of printed boards or documentation. The padstack naming convention enables a designer to convey all variations and dimensions of a padstack, employing it in combination with intelligent land pattern conventions also defined within the standard, according to design rules established in the IPC-2220 design series.

A popular document that covers land pattern design for all types of passive and active components, IPC-7351 directs users on an appropriate land pattern based on desired component density through the provision of three separate land pattern geometries for each component. The new B revision of the standard introduces land pattern design guidance and rules for new surface mount component families such as electrolytic aluminum capacitors (CAPAE); small outline diode, flat lead (SODFL) and small outline transistor, flat lead (SOTFL); and dual flat no-lead (DFN) devices.

Several device families, including DPAK, QFP (quad flat pack) and QFN (quad flat, no-lead), often feature thermal pads on the bottom of the packages that expose the die to the printed board surface, which maximizes the efficient heat transfer path when these devices are soldered to the printed board. The usage of such thermal pads, however, carries a risk of the component floating on top of the solder. Therefore, IPC-7351B now provides a default paste mask for those pads to allow the package body to settle.

The B revision of the standard also expands its lead free coverage with the addition of new solder alloys and presents thoughtful discussion on etch-factor compensations at the designer level as well as at printed board fabrication. In addition, IPC-7351 has been edited significantly by users of the standard to enhance its clarity and understanding.

IPC-7351B includes both the standard and an IPC-7351B Land Pattern Calculator(TM) on CD-ROM for accessing component and land pattern dimensional data. The calculator includes the document's mathematical algorithms so users can build a land pattern for a corresponding surface mount part quickly and accurately. The tool also allows for modification of dimensional attributes of IPC approved land patterns. Purchasers also receive a 30-day free trial of the IPC-7351 Land Pattern Wizard(TM) developed by Mentor Graphics®. An advanced version of the IPC-7351B Calculator, the IPC-7351 Land Pattern Wizard tool enables users to not only save their land patterns within new land pattern library files, but also to instantly export land patterns to their preferred CAD format.

A half-day workshop on the updates to IPC-7351 will be held on September 29, 2010, at Electronics Midwest in Rosemont, Ill.

For more information or to purchase IPC-7351B, visit ipc.org/7351 or contact John Perry, IPC technical project manager, at JohnPerry@ipc.org or +1 847-597-2818.

About IPC
IPC (www.IPC.org) is a global trade association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 2,700 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. A member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $1.7 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Arlington, Va.; Garden Grove, Calif.; Stockholm, Sweden; Moscow, Russia; and Shanghai and Shenzhen, China.
Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


 

Post a comment about this story

Name:
E-mail:
(your e-mail address will not be posted)
Comment title:
Comment:
To submit comment, enter the security code shown below and press 'Post Comment'.
 



 See related product stories
More .....
 See more product news in:
Services
 More New Product News from this company:
Scientific RoHS Revision Decision was praised by IPC.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
Congressman Rodney Frelinghuysen Visits Heller Industries in New Jersey
IPC Conducts Study to Assess North American Labor Pool for Electronics Manufacturers
Electronics Assembly Standards IPC J-STD-001 and IPC-A-610 Updated
Congressman Brad Schneider Visits Creation Technologies in Illinois
North American PCB Business Reflects Normal Seasonal Slowdown
More ....
 Tools for you
Watch Company 
View Company Profile
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Trade Associations


Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by Thomasnet.com        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy



Error close

Please enter a valid email address