ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

IPC releases PCB industry results for July 2011.

Print | 
Email |  Comment   Share  
September 7, 2011 - According to IPC's North American PCB Statistical Program, rigid PCB shipments were down 10.2% and bookings were down 17.0% in July 2011 from July 2010. Year to date, rigid PCB shipments increased 2.3% and bookings declined 10.0%. Flexible circuit shipments were down 28.3% and bookings declined 4.5% compared to July 2010. Year to date, flexible circuit shipments increased 3.2% and bookings increased 8.0%. For rigid and flexible circuits combined, industry shipments decreased 12.1% from July 2010.

IPC Releases PCB Industry Results for July 2011

(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

IPC-Association Connecting Electronics Industries
3000 Lakeside Drive
Bannockburn, IL, 60015

Press release date: August 31, 2011

BANNOCKBURN, Ill., USA, - IPC - Association Connecting Electronics Industries® announced today the July findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.

PCB Industry Growth Rates and Book-to-Bill Ratios Announced
Rigid PCB shipments were down 10.2 percent and bookings were down 17.0 percent in July 2011 from July 2010. Year to date, rigid PCB shipments increased 2.3 percent and bookings declined 10.0 percent. Compared to the previous month, rigid PCB shipments decreased 24.8 percent and rigid bookings decreased 19.0 percent. The book-to-bill ratio for the North American rigid PCB industry in July 2011 remained near parity at 0.99.

Flexible circuit shipments in July 2011 were down 28.3 percent and bookings declined 4.5 percent compared to July 2010. Year to date, flexible circuit shipments increased 3.2 percent and bookings also increased 8.0 percent. Compared to the previous month, flexible circuit shipments decreased 17.8 percent and flex bookings fell 34.9 percent. The North American flexible circuit book-to-bill ratio in July 2011 jumped to 1.20.

For rigid PCBs and flexible circuits combined, industry shipments in July 2011 decreased 12.1 percent from July 2010, as orders booked decreased 16.0 percent from July 2010. Year to date, combined industry shipments were up 2.4 percent and bookings were down 8.5 percent. Compared to the previous month, combined industry shipments for July 2011 decreased 24.2 percent and bookings decreased 20.8 percent. The combined (rigid and flex) industry book-to-bill ratio in July 2011 climbed to just above parity at 1.01.

"July is typically a slower month than June for the PCB industry," said IPC President & CEO Denny McGuirk. "Negative year-on-year growth rates in North American PCB sales and orders for July reflect slowing growth compared to the height of the recovery one year ago," he added. "The good news is the book-to-bill ratio remains just above parity, largely due to the continued strength of flexible circuit orders."

The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC's survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next two to three months.

Book-to-bill ratios and growth rates for rigid PCBs and flexible circuits combined are heavily affected by the rigid PCB segment. Rigid PCBs represent an estimated 89 percent of the current PCB industry in North America, according to IPC's World PCB Production Report.

The Role of Domestic Production
IPC's monthly survey of the North American PCB industry tracks bookings and shipments from U.S. and Canadian facilities, which provide indicators of regional demand. These numbers do not measure U.S. and Canadian PCB production. To track regional production trends, IPC asks survey participants for the percent of their reported shipments that were produced domestically (i.e., in the USA or Canada). In July 2011, 82 percent of total PCB shipments reported were domestically produced. Domestic production accounted for 82 percent of rigid PCB and 82 percent of flexible circuit shipments in July by IPC's survey participants. These numbers are significantly affected by the mix of companies in IPC's survey sample, which change slightly in January, but are kept constant through the remainder of the year.

Bare Circuits versus Assembly
Flexible circuit sales typically include value-added services such as assembly, in addition to the bare flex circuits. In July, the flexible circuit manufacturers in IPC's survey sample indicated that bare circuits accounted for about 48 percent of their shipment value reported for the month. Assembly and other services make up a large and growing segment of flexible circuit producers' businesses. This figure is also sensitive to changes in the survey sample, which may occur at the beginning of each calendar year.

Interpreting the Data
Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they may reflect cyclical effects and short-term volatility. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month may not be significant unless a trend of more than three consecutive months is apparent. It is also important to consider changes in bookings and shipments to understand what is driving changes in the book-to-bill ratio.

The information in IPC's monthly PCB industry statistics is based on data provided by a representative sample of both rigid and flexible PCB manufacturers in the USA and Canada. IPC publishes the PCB Book-to-Bill Ratio and the PCB Statistical Program Report each month. Statistics for the previous month are not available until the last week of the following month.

About IPC
IPC ( is a global trade association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 3.000 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $1.85 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Arlington, Va.; Stockholm, Sweden; Moscow, Russia; Bangalore, India; and Shanghai, Shenzhen and Beijing, China.

Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


Post a comment about this story

(your e-mail address will not be posted)
Comment title:
To submit comment, enter the security code shown below and press 'Post Comment'.

 See related product stories
More .....
 See more product news in:
 More New Product News from this company:
Scientific RoHS Revision Decision was praised by IPC.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
RAMI Act Passes U.S. House of Representatives
Congressman Rodney Frelinghuysen Visits Heller Industries in New Jersey
IPC Conducts Study to Assess North American Labor Pool for Electronics Manufacturers
Electronics Assembly Standards IPC J-STD-001 and IPC-A-610 Updated
Congressman Brad Schneider Visits Creation Technologies in Illinois
More ....
 Tools for you
Watch Company 
View Company Profile
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Trade Associations

Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy

Error close

Please enter a valid email address