ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

IPC Report shows PCB industry growth during April 2010.

Print | 
Email |  Comment   Share  
June 9, 2010 - According to April 2010 report, rigid PCB shipments and bookings were up compared to April 2009, with book-to-bill ratio of 1.11. For flexible circuits, book-to-bill ratio was 0.98, with shipments down and bookings up from April 2009. Ratio for rigid PCBs and flexible circuits combined increased to 1.10, with shipments and bookings higher in April 2010. IPC's Denny McGuirk said ratio has been above parity for 12 months, indicating recovery with increasing momentum.

IPC Releases PCB Industry Results for April 2010


(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

IPC-Association Connecting Electronics Industries
3000 Lakeside Drive
Bannockburn, IL, 60015
USA



Press release date: May 26, 2010

BANNOCKBURN, Ill., USA - IPC - Association Connecting Electronics Industries® announced today the April findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.

PCB Industry Growth Rates and Book-to-Bill Ratios Announced
Rigid PCB shipments were up 35.7 percent while bookings increased 40.6 percent in April 2010 from April 2009. Year to date, rigid PCB shipments were up 14.9 percent and bookings have grown 34.0 percent. Compared to the previous month, rigid PCB shipments decreased 12.3 percent and rigid bookings decreased 15.7 percent. The book-to-bill ratio for the North American rigid PCB industry in April 2010 continued its climb to 1.11.

Flexible circuit shipments in April 2010 were down 14.9 percent, but bookings were up 6.6 percent compared to April 2009. Year to date, flexible circuit shipments were down 5.5 percent and bookings were up 7.0 percent. Compared to the previous month, flexible circuit shipments went down 26.4 percent and flex bookings declined by 21.5 percent. The North American flexible circuit book-to-bill ratio in April 2010 remained at 0.98.

For rigid PCBs and flexible circuits combined, industry shipments in April 2010 increased 30.7 percent from April 2009, as orders booked increased 37.6 percent from April 2009. Year to date, combined industry shipments were up 13.2 percent and bookings were up 31.8 percent. Compared to the previous month, combined industry shipments for April 2010 decreased 13.4 percent and bookings went down 16.1 percent. The combined (rigid and flex) industry book-to-bill ratio in April 2010 increased to 1.10.

"The book-to-bill ratio just keeps on climbing," said IPC President & CEO Denny McGuirk. "It has now been above parity for a full 12 months, indicating a recovery that is gaining momentum. The growth so far this year has been in rigid PCB sales. The month-to-month sales decline from March 2010 reflects normal seasonal effects." The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC's survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next two to three months.

Book-to-bill ratios and growth rates for rigid PCBs and flexible circuits combined are heavily affected by the rigid PCB segment. Rigid PCBs represent an estimated 90 percent of the current PCB industry in North America, according to IPC's World PCB Production and Laminate Market Report.

The Role of Domestic Production
IPC's monthly survey of the North American PCB industry tracks bookings and shipments from U.S. and Canadian facilities, which provide indicators of regional demand. These numbers do not measure U.S. and Canadian PCB production. To track regional production trends, IPC asks survey participants for the percent of their reported shipments that were produced domestically (i.e., in the USA or Canada). In April 2010, 84 percent of total PCB shipments reported were domestically produced. Domestic production accounted for 84 percent of rigid PCB and 83 percent of flexible circuit shipments in April by IPC's survey participants. These numbers are significantly affected by the mix of companies in IPC's survey sample, which changed slightly in January, but will remain constant through the remainder of the year.

Bare Circuits versus Assembly
Flexible circuit sales typically include value-added services such as assembly, in addition to the bare flex circuits. In April, the flexible circuit manufacturers in IPC's survey sample indicated that bare circuits accounted for about 58 percent of their shipment value reported for the month. Assembly and other services make up a large and growing segment of flexible circuit producers' businesses. This figure is also sensitive to changes in the survey sample, which may occur at the beginning of each calendar year.

Interpreting the Data
Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they may reflect cyclical effects. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month may not be significant unless a trend of three consecutive months or more is apparent. It is also important to consider changes in bookings and shipments to understand what is driving changes in the book-to-bill ratio.

The information in IPC's monthly PCB industry statistics is based on data provided by a representative sample of both rigid and flexible PCB manufacturers in the USA and Canada. IPC publishes the PCB Book-to-Bill Ratio and the PCB Statistical Program Report each month. Statistics for the previous month are not available until the last week of the following month.

About IPC
IPC (www.IPC.org) is a global trade association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 2,700 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $1.7 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Arlington, Va.; Garden Grove, Calif.; Stockholm, Sweden; Moscow, Russia; and Shanghai and Shenzhen, China.
Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


 

Post a comment about this story

Name:
E-mail:
(your e-mail address will not be posted)
Comment title:
Comment:
To submit comment, enter the security code shown below and press 'Post Comment'.
 



 See related product stories
More .....
 See more product news in:
Services
 More New Product News from this company:
Scientific RoHS Revision Decision was praised by IPC.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
RAMI Act Passes U.S. House of Representatives
Congressman Rodney Frelinghuysen Visits Heller Industries in New Jersey
IPC Conducts Study to Assess North American Labor Pool for Electronics Manufacturers
Electronics Assembly Standards IPC J-STD-001 and IPC-A-610 Updated
Congressman Brad Schneider Visits Creation Technologies in Illinois
More ....
 Tools for you
Watch Company 
View Company Profile
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Trade Associations


Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by Thomasnet.com        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy



Error close

Please enter a valid email address