ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

IPC Releases PCB industry results for February 2009.

Print | 
Email |  Comment   Share  
March 30, 2009 - According to its February 2009 North American PCB Statistical Program, IPC-Association Connecting Electronics Industries® announced that rigid PCB shipments are down 23.2% and bookings were down 35.5% from last year. Compared to the previous month, respective decreases are 3.2% and 3.5%. Flexible circuit shipments, however, were up 3.6%, and bookings were down 6.1% compared to February 2008. Compared to the previous month, respective increases were 8.7% and 23.9%.

IPC Releases PCB Industry Results for February 2009

(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

IPC-Association Connecting Electronics Industries
3000 Lakeside Drive
Bannockburn, IL, 60015

Press release date: March 27, 2009

BANNOCKBURN, Ill., USA, March 27, 2009 - IPC - Association Connecting Electronics Industries® announced today the February findings from its monthly North American Printed Circuit Board (PCB) Statistical Program.

PCB Industry Growth Rates and Book-to-Bill Ratios Announced

Rigid PCB shipments are down 23.2 percent and bookings are down 35.5 percent in February 2009 from February 2008. Year to date, rigid PCB shipments are down 21.1 percent and bookings are down 33.2 percent. Compared to the previous month, rigid PCB shipments decreased 3.2 percent and rigid bookings decreased 3.5 percent. The book-to-bill ratio for the North American rigid PCB industry in February 2009 remained below parity at 0.89.

Flexible circuit shipments in February 2009 are up 3.6 percent, and bookings are down 6.1 percent compared to February 2008. Year to date, flexible circuit shipments are up 9.4 percent and bookings are down 4.2 percent. Compared to the previous month, flexible circuit shipments are up 8.7 percent and flex bookings were up 23.9 percent. The North American flexible circuit book-to-bill ratio in February 2009 climbed just above parity at 1.02.

For rigid PCBs and flexible circuits combined, industry shipments in February 2009 decreased 21.4 percent from February 2008 and orders booked decreased 33.7 percent from February 2008. Year to date, combined industry shipments are down 19.2 percent and bookings are down 31.6 percent. Compared to the previous month, combined industry shipments for February 2009 are down 2.3 percent and bookings are down 1.6 percent. The combined (rigid and flex) industry book-to-bill ratio in February 2009 was 0.90.

"The book-to-bill ratio for PCBs overall has stayed in negative territory for 10 months now, and orders are still declining compared to last year," said IPC President Denny McGuirk. "This suggests we will continue to see weak sales for the next few months at least. The flexible circuit segment of the industry is faring better than rigid PCBs right now," he added.

The book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC's survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next two to three months.

Book-to-bill ratios and growth rates for rigid PCBs and flexible circuits combined are heavily affected by the rigid PCB segment. Rigid PCBs represent an estimated 90 percent of the current PCB industry in North America, according to IPC's World PCB Production and Laminate Market Report.

The Role of Domestic Production IPC's monthly survey of the North American PCB industry tracks bookings and shipments from U.S. and Canadian facilities, which provide indicators of regional demand. These numbers do not measure U.S. and Canadian PCB production. To track regional production trends, however, IPC asks survey participants for the percent of their reported shipments that were produced domestically (i.e., in the USA or Canada). In February 2009, 89 percent of total PCB shipments reported were domestically produced. Domestic production accounted for 89 percent of rigid PCB and 88 percent of flexible circuit shipments in February by IPC survey participants. These numbers are significantly affected by the mix of companies in IPC's survey sample, which may change slightly in January, but are kept constant through the calendar year.

Bare Circuits versus Assembly Flexible circuit sales typically include value-added services such as assembly, in addition to the bare flex circuits. In February, the flexible circuit manufacturers in IPC's survey sample indicated that bare circuits accounted for approximately 78 percent of their shipment value reported for the month. Assembly and other services make up a large and growing segment of flexible circuit producers' businesses. This figure is also sensitive to changes in the survey sample, which may occur at the beginning of each calendar year.

Interpreting the Data Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth. Month-to-month comparisons should be made with caution as they may reflect cyclical effects. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month may not be significant unless a trend of three consecutive months or more is apparent. It is also important to consider changes in bookings and shipments to understand what is driving changes in the book-to-bill ratio.

The information in IPC's monthly PCB industry statistics is based on data provided by a representative sample of both rigid and flexible PCB manufacturers in the USA and Canada. IPC publishes the PCB Book-to-Bill Ratio and the PCB Statistical Program Report each month. Statistics for the previous month are not available until the last week of the following month.

About IPC IPC ( is a global trade association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 2,700 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $1.7 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Arlington, Va.; Garden Grove, Calif.; Stockholm, Sweden; and Shanghai and Shenzhen, China.
Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


Post a comment about this story

(your e-mail address will not be posted)
Comment title:
To submit comment, enter the security code shown below and press 'Post Comment'.

 See related product stories
More .....
 See more product news in:
 More New Product News from this company:
Scientific RoHS Revision Decision was praised by IPC.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
Congressman Rodney Frelinghuysen Visits Heller Industries in New Jersey
IPC Conducts Study to Assess North American Labor Pool for Electronics Manufacturers
Electronics Assembly Standards IPC J-STD-001 and IPC-A-610 Updated
Congressman Brad Schneider Visits Creation Technologies in Illinois
North American PCB Business Reflects Normal Seasonal Slowdown
More ....
 Tools for you
Watch Company 
View Company Profile
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Trade Associations

Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy

Error close

Please enter a valid email address