ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

Delcam CRISPIN to Launch "intelligent" Footwear Software at Jinjiang Expo

Print | 
Email |  Comment   Share  

Delcam CRISPIN to Launch "intelligent" Footwear Software at Jinjiang Expo
Delcam CRISPIN to Launch "intelligent" Footwear Software at Jinjiang Expo
Click Here to Enlarge Picture

Delcam Plc
Small Heath Business Park
Birmingham Hampshir, B10 0HJ
United Kingdom



Press release date: March 25, 2014

Delcam CRISPIN will launch the 2014 version of its Engineer Pro software for pattern development and grading in the footwear industry at the Jinjiang International Footwear Exposition to be held in Jinjiang Machi City, Fujian, China, from 18th to 21st April. The new version includes a number of enhancements that add “intelligence” to the software and so make it more intuitive and faster to use.

For full details, please go to www.delcam-crispin.com

Delcam CRISPIN is the world’s largest supplier of CADCAM software to the footwear industry. It is the only supplier able to provide a complete solution for the 3D design and manufacture of lasts, uppers and soles. Engineer Pro helps users to produce 2D samples and graded footwear patterns for manufacturing in the fastest possible time, whilst also assisting in the management of tooling costs.

One of the key enhancements in the 2014 release can be seen when creating a chain from a series of intersecting lines. Engineer Pro now anticipates the chain that the user wants and highlights it. Any constrained items, including markers, linked to the chain will react more intelligently during grading and will adjust their positions automatically if the grading operation would make them overlap the boundary of the piece.

The single-click boundary command introduced in the 2013 release of Engineer Pro has been enhanced. Adjoining regions can now be added to the piece with a single click in the neighbouring area. In addition, if a part has a mirrored boundary, the features will be mirrored automatically. Once the piece area has been finalised, edge details can be added around the part simply by dragging and dropping designs from the library of edge templates.

Another time-saving enhancement is the ability to step around all the intersections in the boundary and apply radii to the corners. Adding these curves in place of sharp corners speeds up and simplifies subsequent cutting operations. Any sharp corners that need to be retained can be deselected from the boundary. Chamfers can be added around the boundary in a similar way, with notches being skipped automatically since it makes no sense to apply a chamfer to a notch. Notches are also skipped if the radius value is too large to be applied.

Another new improvement adds more intelligence to the selection of small items. If the cursor is positioned close to a small detail like a notch, the system will assume that this is what is to be selected, instead of the user having to zoom in to make the selection.

In addition a “Select All Like” option allows users to choose a particular line type and then select all similar lines automatically. Once selected, the group of lines can be edited simultaneously. For example, all margins could be selected and converted from slots suitable for making paper patterns into lines for the final piece.

Finally, more general improvements in Engineer Pro 2014 include improved import of DXF files using the Delcam Exchange data-translation system, plus better support of the pallet milling machines and auto-stitching equipment manufactured by Orisol.

For further information on the Delcam CRISPIN software range, please contact:

Peter Dickin, Marketing Manager
Direct phone: 44 (0)121 683 1081
e-mail: marketing@delcam.com

Delcam plc
Small Heath Business Park,
Birmingham, B10 0HJ, UK
www.delcam.com
Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


 

Post a comment about this story

Name:
E-mail:
(your e-mail address will not be posted)
Comment title:
Comment:
To submit comment, enter the security code shown below and press 'Post Comment'.
 



 See related product stories
More .....
 See more product news in:
Software
 More New Product News from this company:
Inspection Software can create compound items.
CAM Software enhances high-speed and 5-axis machining.
CAD for CAM Software streamlines workflow and development.
CAD/CAM Software aids design of corrective orthotic insoles.
CAM Software supports high-speed and 5-axis machining.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
Delcam Leads the Way in Additive Manufacturing of 3D Orthotic Insoles
Delcam to Show New PowerSHAPE Pro for Re-engineering at Pacific Design and Manufacturing
SAIC Specifies Delcam PowerMILL CAM Software for European Design Centre
Delcam Supports Award-Winning Hamuel Hybrid Repair Machine
More ....
 Tools for you
Watch Company 
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
CAD/CAM Software
Engineering Software
Design Graphics Software
Join the forum discussion at:
Engineers Lounge


Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by Thomasnet.com        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy



Error close

Please enter a valid email address