Broadcom Introduces World's Broadest Automotive Ethernet Product Portfolio - Ushers in Next Generation Connected Car |
Broadcom Introduces World's Broadest Automotive Ethernet Product Portfolio - Ushers in Next Generation Connected Car
|
|
Click Here to Enlarge Picture
|
|
(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)
Broadcom Corp.
5300 California Ave.
San Jose, CA, 95110
USA
Press release date: December 7, 2011
Dramatically Reduces Connectivity Cost and Cabling Weight
IRVINE, Calif. -
- Enables migration from multiple closed applications to single open, scalable Ethernet-based network
- Delivers high-bandwidth connectivity for in-vehicle network applications (driver assist, diagnostics, infotainment)
- World's first Ethernet automotive solution to deliver 100Mbps over unshielded single twisted pair cable
Broadcom Corporation (NASDAQ: BRCM), a global innovation leader in semiconductor solutions for wired and wireless communications, today announced the world's broadest automotive Ethernet portfolio, engineered to meet the rigorous qualifications and demands of the automotive semiconductor market. Broadcom's BroadR-Reach® automotive portfolio delivers high-performance bandwidth of 100Mbps and beyond while dramatically reducing connectivity costs up to 80 percent(1) and cabling weight as much as 30 percent(2). Visit go.Broadcom.com/Automotive to learn more.
Enabling the Next-Generation Connected Car
As consumer demand for in-vehicle connectivity continues to grow, automotive manufacturers are under pressure to deliver competitive, innovative features while minimizing cost. Broadcom's BroadR-Reach automotive solutions allow multiple in-vehicle systems (such as infotainment, on-board diagnostics and automated driver assistance) to simultaneously access information over unshielded single twisted pair cable. By eliminating cumbersome, shielded cabling, automotive manufacturers can significantly reduce connectivity costs and cabling weight.
The Broadcom automotive Ethernet product portfolio consists of five devices including three highly integrated switches with embedded PHYs, and two stand-alone PHY solutions. Each device in the automotive portfolio is designed to meet in-car EMC requirements and extreme automotive temperature grades. Broadcom is TS16949 compliant and AEC-Q100 qualification is currently under way.
Proliferation of Automotive Ethernet Connectivity
This announcement follows the recent introduction of the OPEN (One-Pair Ether-Net) Alliance Special Interest Group (SIG). Established to drive wide scale adoption of Ethernet-based automotive connectivity as the standard in automotive connectivity, the SIG will address industry requirements for improving in-vehicle safety, comfort, and infotainment, while significantly reducing network complexity and cabling costs. Members include Broadcom, NXP Semiconductors N.V., Freescale Semiconductor, Harman International, BMW, Hyundai Motor Company and Jaguar Land Rover. License to specification for BroadR-Reach is available to all interested OPEN Alliance members under RAND terms via a license from Broadcom. Visit www.opensig.org to learn more.
Market Drivers:
- In-vehicle electronics growing in volume and complexity(3)
- Ongoing migration from analog electromechanical systems in cars to digital
- Increase in number of cameras, sensors, diagnostics, ADAS, infotainment, etc.
- In-dash display consoles becoming computerized nerve centers for driver/passenger control
- Automotive manufacturers require open, scalable, in-vehicle connectivity(4)
- Need for a common network that supports multiple electronic systems and devices
- New devices & solutions require higher bandwidth and convergence(5)
- Prevalence of in-vehicle electronics has nearly doubled in the last decade(4)
- Consumer demand for automotive connectivity increasing at a rapid pace(3)
Product Portfolio Key Facts:
BCM89500 7-port, layer 2 switch with four integrated BroadR-Reach PHYs
Designed to support IEEE 1588 and IEEE 802.1AS timing functions
Deep sleep and ultra-low power modes for reduced power consumption
BCM89501 7-port, layer 2 switch with five integrated BroadR-Reach PHYs
Designed to support IEEE 1588 and IEEE 802.1AS timing functions
Deep sleep and ultra-low power modes for reduced power consumption
BCM89200 4-port, layer 2 switch with two integrated BroadR-Reach PHYs
Supports various uplink ports for connectivity to external devices
Designed to support IEEE 1588 and IEEE 802.1AS timing functions
Deep sleep and ultra-low power modes for reduced power consumption
BCM89610 Single-port, 10/100/1000BASE-T PHY
Optimized for in- vehicle diagnostic applications for when vehicle is powered off
Supports variety of connectivity options for external devices
BCM89810 Single-port, 100Mbps BroadR-Reach PHY
Optimized for multiple in-car network applications for when vehicle is powered on
Supports variety of connectivity options for external devices
All devices (with exception to BCM89610) are compliant with OPEN Alliance specifications.
Availability
Devices are now sampling with production volume slated for the second half of 2012.
Quotes:
Dr. Ali Abaye, Senior Director, Product Marketing, Broadcom
"The increasing amount of gadgetry used in vehicles today rivals that of the consumer electronics segment. Broadcom is on the forefront of engineering innovative technologies that enable people to connect virtually everything in the home, hand and infrastructure. Automotive connectivity a great fit and a natural next step for Ethernet technology, and we intend to lead the way in simplifying in-vehicle connectivity while dramatically reducing costs for automotive manufacturers."
Thilo Koslowski, Automotive Practice Leader, Gartner
"Network connectivity in automobiles represents a crucial opportunity for new product and business innovation the automotive industry. By 2016, the majority of consumers in mature markets will consider in-vehicle Web access a key criterion in their automobile purchase. Connected vehicle technologies will enable automotive companies to address key industry trends: sustainability requirements, digital lifestyle convergence, changing market demographics, emerging transportation policies and new mobility innovations. The connected vehicle represents the start of a new era for the automotive industry where the partnership principle of "controlled openness" will lead to new customer experiences and successful business strategies."
Resources:
Automotive Portfolio Featured Product Page
Subscribe to RSS Feed: Broadcom Infrastructure & Networking Grouphttp://go.broadcom.com/sv2
About Broadcom
Broadcom Corporation (NASDAQ: BRCM), a FORTUNE 500® company, is a global leader and innovator in semiconductor solutions for wired and wireless communications. Broadcom® products seamlessly deliver voice, video, data and multimedia connectivity in the home, office and mobile environments. With the industry's broadest portfolio of state-of-the-art system-on-a-chip and embedded software solutions, Broadcom is changing the world by Connecting everything®. For more information, go to www.broadcom.com.
(1) Based on current market prices for unshielded single twisted pair FlexRay cables and weight of two-meter twisted, single-pair FlexRay cables and connectors
(2) Based on combined weight of 2-meter twisted, single-pair FlexRay cables and connectors versus 2-meter LVDS cables with LVDS connectors
(3) Gartner - The Automotive Industry Accelerates Innovations; Published: 16 November 2010 ID:G00209090
(4) ABI Semiconductor Forecast 2011
(5) IEEE 802.1 AVB Task Force Meeting, March 2011
Broadcom®, the pulse logo, Connecting everything®, the Connecting everything logo, and BroadR-Reach are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are the property of their respective owners.
SOURCE
Broadcom Corporation; BRCM Infrastructure & Networking
Web Site: http://www.broadcom.com
|
|
|
|
|
|
|
|
|
|
|
