ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

ASTM proposes standards for traffic paint/glass beads.

Print | 
Email |  Comment   Share  
June 12, 2009 - ASTM Subcommittee D01.44 on Traffic Coatings is working on proposed standard ASTM WK22312, Practice for Drum and Tote Sampling of Waterborne Traffic Paint, which addresses laboratory sampling issues. It also is working on ASTM WK23758, Test Method for Measuring Gradation of Glass Beads Using a Flowing Stream Digital Image Analyzer. Assisting manufacturers with production/quality control of glass beads, ASTM WK23758 will also allow end users of glass beads to determine conformance to standard.

Proposed New ASTM Traffic Coatings Standards to Cover Waterborne Traffic Paint, Gradation of Glass Beads

(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

ASTM International
100 Barr Harbor Dr., Box C700
West Conshohocken, PA, 19428-2959

Press release date: June 10, 2009

W. CONSHOHOCKEN, PA, 10 June 2009 - Traffic paint plays an important role in maintaining the safety of roads. Subcommittee D01.44 on Traffic Coatings, part of ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications, is currently working on two proposed new standards covering the sampling of waterborne traffic paint and glass bead gradation measurement.

Waterborne Traffic Paint
Ensuring that traffic paint taken from the field is tested properly in laboratories is a concern of paint suppliers as well as private testing laboratories, Department of Transportation labs, DOT striping crews and striping contractors. A proposed new ASTM standard, ASTM WK22312, Practice for Drum and Tote Sampling of Waterborne Traffic Paint, addresses laboratory sampling issues.

According to Greg Shay, application and formulation development engineer, traffic paint, UCAR Emulsion Systems and Monomers, and chair of Task Group D01.44.02 on Traffic Paint and Liquid Traffic Markings, testing is done for qualification and/or to ensure that paint of a consistent quality is being provided to state striping crews and to striping contractors.

"If the sampling is not done properly, the sample may not be representative and could fail one or more specifications during testing, such as resin content or dry time," says Shay.

Shay notes that there are two issues for field sampling of drums, totes and other traffic paint containers. "The first is that there is no common standard method being used for the sampling, and the second is that the various methods that are being used often do not provide a sample that is uniform and representative of the composite sample in the container."

Interested parties are invited to join in the ongoing development of ASTM WK22312. "We would like to know how sampling is currently being done by the various state departments of transportation and contractors, and what methods or sampling equipment are available from vendors to obtain uniform samples," says Shay.

Gradation of Glass Beads
Glass beads added to traffic paint during manufacturing are necessary to ensure paint retroreflectivity, especially at night. A proposed new standard, ASTM WK23758, Test Method for Measuring Gradation of Glass Beads Using a Flowing Stream Digital Image Analyzer, will be useful in the production and quality control of glass beads.

"Digital camera technology combined with high speed computers has yielded a very useful tool for determining accurate gradation analysis of glass beads," says Gary Ware, vice president, R&D, SWARCO America, and an ASTM D01 committee member. "This proposed standard defines the first standardized test method for this application."

Ware notes that, in addition to use by manufacturers, ASTM WK23758 will allow end users of glass beads to determine conformance to the standard.

"We welcome any and all input and participation, but technical people from the manufacturers of digital image analyzers are especially needed," says Ware. For technical Information, contact (ASTM WK22312) Greg Shay, UCAR Emulsion Systems and Monomers, Cary, N.C. (phone: 919-469-6789;; (ASTM WK23758) Gary Ware, SWARCO America, Columbia, Tenn. (phone: 931-560-4166; ASTM Committee D01 meets June 21-23 in Norfolk, Va.

ASTM International welcomes and encourages participation in the development of its standards. ASTM's open consensus process, using advanced Internet-based standards development tools, ensures worldwide access for all interested individuals. For more information on becoming an ASTM member, please contact Jeffrey Adkins, ASTM International (phone: 610-832-9738;

Established in 1898, ASTM International is one of the largest international standards development and delivery systems in the world. ASTM International meets the World Trade Organization (WTO) principles for the development of international standards: coherence, consensus, development dimension, effectiveness, impartiality, openness, relevance and transparency. ASTM standards are accepted and used in research and development, product testing, quality systems and commercial transactions around the globe.
Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.

User comments about this story

What grade glass bead

for removing scale of oil forged in Dies , burnned polymer

By mahmoud payandeh nia on Apr 12, 2012 07:49

Reply to this comment

glass bead standards

i want clean internal of forge dies from mould coat scales by sand blast machine the hardness of dies are from 45 to 50 HRC also i want clean burned polymer scales from internal screw of extruder machine ,please advice me : 1: what grade and what mesh glass bead is good ,which don,t destroy surface finish of die and extruder , thanks in advance

By mahmou payandeh nia on Oct 13, 2010 06:43

Reply to this comment


Post a comment about this story

(your e-mail address will not be posted)
Comment title:
To submit comment, enter the security code shown below and press 'Post Comment'.

 See related product stories
More .....
 See more product news in:
Materials and Material Processing
Paints and Coatings
 More New Product News from this company:
ASTM Workshop to address additives in biomedical polymers.
Oil Training Course examines sampling, testing, evaluation.
Radiant Barrier Systems Standards approved by ASTM committee.
Training Course addresses hazards in oxygen systems.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
ASTM/NIBS Workshop on Building Science Education in North America
Fatigue and Fracture of Metallic Medical Materials and Devices
ASTM International Compilation on Silica and Associated Respirable Mineral Particles
Guidance for Potential Solar Photovoltaic Investors to Be Provided in Proposed ASTM Standard
Test for Sustained Air Performance of Central Vacuum Cleaning Units Approved as ASTM Standard
More ....
 Tools for you
Watch Company 
View Company Profile
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Trade Associations
Traffic Marking Paints
Glass Beads
Join the forum discussion at:
Hard to Handle
Tools of the Trade

Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy

Error close

Please enter a valid email address