ThomasNet News Logo
Sign Up | Log In | ThomasNet Home | Promote Your Business

ASTM and NACE collaborate on corrosion terminology standard.

Print | 
Email |  Comment   Share  
September 24, 2009 - ASTM and NACE International have created joint standard NACE/ASTM G193, Terminology and Acronyms Relating to Corrosion, developed by Subcommittee J01.02 under jurisdiction of J01, Joint ASTM/NACE Committee on Corrosion. According to Harvey Hack of Northrop Grumman Corp., standard will be used by corrosion organizations worldwide to prevent confusion in corrosion testing and in interpretation of related standards. It contains more than 400 terms, along with list of acronyms.

Joint Corrosion Terminology Standard Developed by ASTM International and NACE International


(Archive News Story - Products mentioned in this Archive News Story may or may not be available from the manufacturer.)

ASTM International
100 Barr Harbor Dr., Box C700
West Conshohocken, PA, 19428-2959
USA



Press release date: September 23, 2009

W. CONSHOHOCKEN, Pa., September 23, 2009 - A new terminology standard is the result of a joint effort between the two major organizations that develop corrosion standards, ASTM International and NACE International. The new standard, NACE/ASTM G193, Terminology and Acronyms Relating to Corrosion, was developed by Subcommittee J01.02, Working Group on Terminology, under the jurisdiction of J01, Joint ASTM/NACE Committee on Corrosion.

"The new NACE/ASTM joint terminology standard will be used by not only ASTM and NACE, but also by other corrosion organizations worldwide to prevent confusion in corrosion testing and in the interpretation of corrosion standards," says Harvey Hack, senior advisory engineer, Northrop Grumman Corp., Undersea Systems, and chair of J01.02.

Hack says that Committee J01 was formed as a pilot program for the two organizations to develop joint standards. "The idea behind this was to prevent duplication of effort by having a single balloting process based on a joint committee membership that included individuals from both organizations," Hack says. "In this way, synergy would replace competition, with the result being better standards in the marketplace."

NACE/ASTM G193 was developed by first compiling all terms that were defined in both of the original NACE and ASTM corrosion terminology standards. The best definition for each of these terms was selected, or aspects of both the NACE and ASTM definitions were combined to create a new definition. Following this, terms that were defined in only one of the original terminology documents were added to the new standard. NACE/ASTM G193 contains more than 400 terms, along with a list of acronyms.

"This new joint standard will be distributed and used by both organizations from now on and is a fine example of how such interorganization cooperation can lead to success for all participants," says Hack.

NACE/ASTM G193 has potential for wide usage by researchers in government, industry and academia, by standards writers and by anyone who uses corrosion standards.

The development of joint standards by Committee J01 is ongoing, with a proposed standard on laboratory testing currently under development. Interested parties, particularly those from the coatings and plastics industries, are invited to participate in the standardization activities of J01.

ASTM International standards can be purchased from Customer Service (phone: 610-832-9585; service@astm.org. Harvey Hack, Northrop Grumman Corp., Underseas Systems, Annapolis, Md. (phone 410-260-5349; harvey.hack@ngc.com). Committee J01 will meet Nov. 11-12 during November committee week in Atlanta, Ga.) or at www.astm.org.

ASTM International welcomes and encourages participation in the development of its standards. ASTM's open consensus process, using advance Internet-based standards development tools, ensures worldwide access for all interested individuals. For more information on becoming an ASTM member, please contact Kevin Shanahan, ASTM International (phone: 610-832-9737; kshanaha@astm.org).

Established in 1898, ASTM International is one of the largest international standards development and delivery systems in the world. ASTM International meets the World Trade Organization (WTO) principles for the development of international standards: coherence, consensus, development dimension, effectiveness, impartiality, openness, relevance and transparency. ASTM standards are accepted and used in research and development, product testing, quality systems and commercial transactions around the globe.

Contact:
Barbara Schindler, ASTM International
100 Barr Harbor Drive, W. Conshohocken, PA 19428
610-832-9603; bschindl@astm.org, www.astm.org
Print | 
Email |  Comment   Share  
Contacts: View detailed contact information.


 

Post a comment about this story

Name:
E-mail:
(your e-mail address will not be posted)
Comment title:
Comment:
To submit comment, enter the security code shown below and press 'Post Comment'.
 



 See related product stories
More .....
 See more product news in:
Services
 More New Product News from this company:
ASTM Workshop to address additives in biomedical polymers.
Oil Training Course examines sampling, testing, evaluation.
Radiant Barrier Systems Standards approved by ASTM committee.
Training Course addresses hazards in oxygen systems.
More ....
| Featured Manufacturing Jobs
 Other News from this company:
ASTM/NIBS Workshop on Building Science Education in North America
Fatigue and Fracture of Metallic Medical Materials and Devices
ASTM International Compilation on Silica and Associated Respirable Mineral Particles
Guidance for Potential Solar Photovoltaic Investors to Be Provided in Proposed ASTM Standard
Test for Sustained Air Performance of Central Vacuum Cleaning Units Approved as ASTM Standard
More ....
 Tools for you
Watch Company 
View Company Profile
Company web site
More news from this company
E-mail this story to a friend
Save Story
Search for suppliers of
Trade Associations


Home  |  My ThomasNet News®  |  Industry Market Trends®  |  Submit Release  |  Advertise  |  Contact News  |  About Us
Brought to you by Thomasnet.com        Browse ThomasNet Directory

Copyright © 2014 Thomas Publishing Company. All Rights Reserved.
Terms of Use - Privacy Policy



Error close

Please enter a valid email address