System Design Software provides 3-D vision capabilities.

National Instruments Corp.    Austin, TX 78759-3504
Aug 15, 2012 Integrating hardware and software tools for 3-D in one graphical development environment, LabVIEW NI Vision Development Module 2012 enables engineers to develop 3-D stereo vision system using any 2 cameras and to perform advanced inspection and control that uses depth information from 3-D vision technology. Engineers can also use LabVIEW with third-party hardware and software tools, and combine 3-D images with other algorithms, such as pattern matching or object tracking, to profile objects.

DAQ System offers embedded measurement and logging platform.

National Instruments Corp.    Austin, TX 78759-3504
Aug 13, 2012 Equipped with 1.33 GHz Intel Core i7 dual-core processor, 2 GB RAM, and 32 GB non-volatile memory, stand-alone NI cDAQ-913x runs data acquisition, online analysis, and logging software. Eight-slot chassis supports more than 50 C Series I/O modules, enabling user to mix and match variety of I/O and sensor types to create custom measurement and logging system. NI cDAQ-913x can stream data to disk at 30 MBps and simultaneously stream continuous measurements with sample rates up to 1 MS/s/ch.

RF Vector Signal Transceiver can replace multiple instruments.

National Instruments Corp.    Austin, TX 78759-3504
Aug 13, 2012 Suited for testing of such wireless and cellular standards as 802.11ac and LTE, NI PXIe-5644R combines vector signal generator and vector signal analyzer with user-programmable FPGA into one PXI modular instrument. Engineers and scientists can use LabVIEW to tailor open, FPGA-based hardware to specific requirements. Along with up to 6.0 GHz frequency coverage and 80 MHz instantaneous RF bandwidth, features include expansion support for MIMO configurations or parallel testing.

FPGA Design Software uses High-Level Synthesis technology.

National Instruments Corp.    Austin, TX 78759-3504
Aug 09, 2012 Integrating with LabVIEW and LabVIEW DSP Design Module, LabVIEW FPGA IP Builder add-on incorporates Xilinx Vivado(TM) High-Level Synthesis technology to simplify FPGA algorithm design. Product minimizes need for manual optimization of high-performance algorithms. Instead, users specify functional behavior along with design constraints and software automatically generates hardware implementation to meet requirements. Separation of code and design constraints facilitates IP reuse.

Source Measure Unit provides 10 pA measurement sensitivity.

National Instruments Corp.    Austin, TX 78759-3504
Jul 17, 2012 Offering 4 channels and sampling rate up to 600 kS/s for measuring fast transient responses, Model NI PXIe-4143 is suited for parallel testing of multipin semiconductor devices. Unit provides 4-quadrant output capability of 24 V at 150 mA, complementing preexisting NI SMU capabilities for sourcing and sinking. With NI SourceAdapt technology, engineers can custom tune SMU response for any device under test load.

Simulation Software facilitates RF and microwave system design.

National Instruments Corp.    Austin, TX 78759-3504
Jun 29, 2012 With connectivity between NI LabVIEW software and AWR Visual System Simulator software, engineers can use measurements in design flow by executing LabVIEW code directly from AWR design environment. AWR Design Environment can incorporate LabVIEW signal processing capabilities including multirate DSP, wireless standards, modulation, and fixed-point math. In addition, engineers can integrate VHDL and LabVIEW FPGA Module code through NI FPGA-based hardware directly into VSS diagrams.

Engine Control Modules support rapid prototyping.

National Instruments Corp.    Austin, TX 78759-3504
Jun 28, 2012 Offering plug-and-play flexibility, C Series Modules provide engine researchers with engine-specific I/O for interfacing directly with internal combustion engine subsystems and actuators. Using modules, which are programmed with LabVIEW FPGA, engineers can rapidly prototype engine control algorithms without creating custom hardware or requesting lengthy code changes. LabVIEW FPGA drivers enable engineers to adjust injection timing and software parameters using open, intuitive programming language.

Graphical Design Software suits power monitoring applications.

National Instruments Corp.    Austin, TX 78759-3504
Jun 07, 2012 With NI LabVIEW Electrical Power Suite, engineers can combine IEC, EN, and IEEE algorithms to develop custom 3-phase power monitoring, metering, or quality analysis applications. Power measurements can be integrated with temperature, pressure, sound, vibration, and control I/O for complete monitoring system. Providing full, streaming access to raw, time-based waveform data, software lets users implement diagnostic algorithms that may be unique to local power service.

18 Slot PCIeChassis features hot-swap capabilities.

National Instruments Corp.    Austin, TX 78759-3504
May 10, 2012 NI PXIe-1066DC 18 slot chassis features redundant, hot-swappable DC power supplies and fans. Front-accessible power supply and fan tray provides flexibility in position-restrictive applications, and Ethernet port gives engineers remote in-band chassis health monitoring capabilities for system management. These features improve system-level mean time before failure and mean time to repair of systems in measurement and control applications.

RTD Module expands measurement system capabilities.

National Instruments Corp.    Austin, TX 78759-3504
May 09, 2012 With full support on LabVIEW Real-Time, NI PXIe-4357 resistance temperature detector (RTD) module is optimized for temperature measurements with Pt100 RTD sensors for thermal monitoring applications. Module integrates sensor-specific signal conditioning with 24-bit delta-sigma ADCs with antialiasing and low-pass filters to sample all 20 channels at 100 S/s/ch and offers typical accuracies of up to 0.09°C. Additional modules can be added to systems to add complementary sensor inputs.

Solid-State RF Multiplexer optimizea routing of signals up to 6.6 GHz.

National Instruments Corp.    Austin, TX 78759-3504
May 03, 2012 Featuring unlimited mechanical lifetime, NI PXI/PXIe-2543 switch module gives RF test engineers solution with which to optimize routing of RF signals up to 6.6 GHz. Solid-state architecture provides long life and integrated PXI triggering provides fast and repeatable measurements. Suited for multisite test, this 6.6 GHz dual 4x1 multiplexer, intended for high-density RF switching, features 50 ohm termination on all channels.

Wireless Gateway and Nodes extend wireless sensor network.

National Instruments Corp.    Austin, TX 78759-3504
May 02, 2012 Aggregating measurement data from distributed wireless sensor network nodes, NI 9795 C Series Gateway makes data available within deployed LabVIEW Real-Time applications running on CompactRIO. NI WSN-3230 and NI WSN-3231 Serial Nodes, featuring 1 RS232 port and 1 RS485 port, respectively, provide 2 digital I/O channels for discrete inputs, event detection, and programmatic control. Typical applications include environmental monitoring, industrial measurement and control, and energy monitoring.

3U PXIe Embedded Controller uses 2nd Gen Intel® Core(TM) i5 CPU.

National Instruments Corp.    Austin, TX 78759-3504
Mar 28, 2012 Dual-core 2nd Generation Intel® Core(TM) i5-2510E processor gives NI PXIe-8115 a 2.5 GHz base clock frequency and uses Intel Turbo Boost Technology to automatically increase clock frequency based on application type. Peripheral I/O - 6 USB 2.0, 2 display, dual-Gigabit Ethernet, GPIB, serial, and parallel ports - optimizes use of slots in PXI chassis for measurement modules. Additional features include In-ROM and hard drive diagnostics as well as 2-8 GB 1333 MHz DDR3 memory.

Circuit Simulation Software suits professional and education markets.

National Instruments Corp.    Austin, TX 78759-3504
Feb 10, 2012 Providing simulation tools that include customizable analyses developed in NI LabVIEW and SPICE analyses and intuitive measurement instruments, Multisim v12.0 enables engineers to optimize design performance to fit applications by minimizing errors and prototype iterations. Multisim Professional Edition is optimized for layout routing and rapid prototyping needs, while Multisim Education Edition incorporates features for teaching and is complemented by hardware, textbooks, and courseware.

WLAN Test Software supports broad range of wireless standards.

National Instruments Corp.    Austin, TX 78759-3504
Feb 01, 2012 In addition to 802.11a/b/g/n devices, 802.11ac WLAN Test Solution supports testing of 802.11ac Tx and Rx WLAN chipsets and devices - up to 4x4 MIMO and 256 QAM. Modular software-defined wireless test platform enables automated test system development using C or MS Visual Studio and also integrates with NI LabVIEW system design software. Solution works with range of signal bandwidths (20, 40, 80, and advanced 80+80, 160 MHz, and optional MAC features include LDPC, STBC, and AMPDU.

PXI Express Remote Control Modules foster system expansion.

National Instruments Corp.    Austin, TX 78759-3504
Nov 23, 2011 Used for creating multichassis PXI Express (PXIe) systems, PXIe-8364 and NI PXIe-8374 enable engineers to directly interface multiple PXIe chassis to one host computer using any expansion topology without complex custom solutions. Modules PXIe-8364 and -8374, respectively, use x1 and x4 MXI-Express links to connect downstream and upstream PXI Express chassis and provide max data bandwidth of 250 MBps and 1 GBps. Cabled PCIe is used as underlying communication technology.

CAN and LIN Modules offer hardware-accelerated messaging.

National Instruments Corp.    Austin, TX 78759-3504
Nov 17, 2011 Integrating with NI CompactDAQ platform, single-port C Series NI 9861 features CAN database support for importing, editing, and using signals from FIBEX, .DBC, and .NCD files. Module offers 100% bus load communication up to 125 kbps without dropping frames. Single-port NI 9866 LIN module, offering 100% bus load communication up to 20 kbps, includes support for importing and using signals from LDF databases along with master/slave support and hardware-timed scheduling for master tasks.

Relay Cards enable high-density switching for PXI.

National Instruments Corp.    Austin, TX 78759-3504
Nov 07, 2011 Designed for automated test systems with large numbers of channels, NI SwitchBlock relay cards provide option for switch configuration, routing, programming, and maintenance in variety of test applications. Products include multiple 2-wire switches for differential measurements and 16-row switches that provide multiple simultaneous connections. NI SwitchBlock comprises expandable carrier that accommodates up to 6 relay cards while occupying 4 slots in PXI chassis.

Sound and Vibration Software automates MCM and NVH testing.

National Instruments Corp.    Austin, TX 78759-3504
Oct 27, 2011 Integrating with LabVIEW, NI Sound and Vibration Measurement Suite 2011 provides analysis and signal processing tools for noise, vibration, and harshness testing (NVH); machine condition monitoring (MCM); and audio test applications. Data-logging virtual instrument lets engineers save data continuously or based on specific criteria such as triggers or time. With Sound and Vibration Assistant stand-alone module, users can quickly acquire, analyze, and log acoustic, noise, and vibration data.

Smart Cameras suit industrial inspection applications.

National Instruments Corp.    Austin, TX 78759-3504
Oct 13, 2011 Featuring 1.6 GHz Intel® Atom(TM) processor and IP67 rating to protect against dust and water, NI 177x Smart Cameras offer variety of sensor options, including VGA, 1.3 MP and 2 MP in color and monochrome as well as 5 MP in monochrome. Cameras have 4 digital input and 4 digital output lines and support RS232 and Ethernet protocols. Offering menu-driven, interactive environment, NI Vision Builder for Automated Inspection 2011 software helps configure, benchmark, and deploy vision systems.