Halogen-Free Adhesives suit assembly of handheld electronics.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 03, 2009 Loctite® line of halogen-free adhesives and sealants are formulated to contain less than 900 ppm bromine and chlorine as well as 1,500 ppm total halogens. Product range includes cyanoacrylates, light cure cyanoacrylates, epoxies, urethanes, UV acrylics, silicones, hot melts, two-part acrylics, and anaerobics used for bonding, sealing, gasketing, and mounting range of components. All meet IPC IEC No. 61249-2-21 requirements.

Solvent-Free Resins meet VOC requirements for green coatings.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jan 06, 2009 Suited for formulating industrial water-based coatings, SF18(TM) and SF26(TM) solvent-free translucent aliphatic waterborne urethane resins offer hardness, high gloss, and chemical and abrasion resistance properties. Single-component, ultra-low VOC products help formulate non-yellowing floor coatings, which have appearance of solvent-borne coatings and can be applied with no odor.

Consumables replace disposable parts on dispensing systems.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Nov 07, 2008 Suited for adhesive dispensing applications, Loctite® Consumables include dispense tips, static mix nozzles, and syringe barrel components. Offered in stainless steel, tapered polyethylene, and flexible polypropylene, dispense tips feature positive locking helical thread design to ensure they stays intact. Static mix nozzles meet any 2-part adhesive dispensing requirements, while syringe barrels and components enable consistent single-component adhesive dispensing.

Flexible Adhesives bond dissimilar substrates.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jul 31, 2008 Based on FlexTec(TM) technology, Loctite® 5510(TM) Adhesive/Sealant and Loctite® 5570(TM) Adhesive are permanently elastic, non-corrosive, primerless formulations free of solvents, isocyanates, silicones, and PVC. Available in white, grey, or black, Loctite 5510 bonds and seals simultaneously, fills gaps, resists weather and moisture, and withstands shock and impact. Loctite 5570, offered in clear or white, replaces mechanical fasteners and rivets and provides vibration and sound-dampening.

Anaerobic Threadlockers withstand heat and stress to 650°F.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jul 25, 2008 Suited for threaded assemblies that are continuously exposed to extreme temperatures, medium-strength Loctite® 2422(TM) is designed for applications where disassembly with hand tools is desired, while high-strength Loctite® 2620(TM) requires short-term exposure to temperatures over 650°F to remove nut and bolt with hand tools. Both pastes solidify when confined between close-fitting metal surfaces in absence of air, prevent loosening from shock and vibration, and eliminate leakage.

Low-Temperature Cleaner works on all metal substrates.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jul 17, 2008 Water-based and solvent-free, Bonderite® Ridoline RT-153(TM) is compatible with phosphate and phosphate-free conversion coating technologies. It can be sprayed onto aluminum, hot-dip galvanized steel, or electrogalvanized steel surfaces at room temperature, conserving energy. While formulated for use with phosphate-free nanotechnologies, cleaner can also be used on zinc, iron, and magnesium phosphate metal pre-treatment processes. Alkaline cleaner runs at temperatures up to 140°F.

Hot Melt Adhesives come in finger-sized packages.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jun 20, 2008 Designed to replace sticky cavity packaging and associated plastic waste, select Technomelt® Adhesives come in packets that load directly into dispensing tank where packet's dry outer casing melts with adhesive. Available in EVA, polyolefin, and pressure sensitive technologies, adhesives are used to manufacture filters, packaging, pressure sensitive adhesive films, insulation, textiles, vehicles, and structures.

Lubricant freezes metal parts to penetrate rust layers.

Henkel Loctite Corporation    Rocky Hill, CT 06067
May 15, 2008 Loctite® Freeze & Release is low-viscosity, spray-on lubricant designed to shock-freeze metal parts, allowing lubricating oils to penetrate into rust layers. It freezes seized and rusted parts to -45°F, which causes hairline cracks to form in rust layer as metal contracts, allowing lubricant to penetrate by capillary action. Threaded assemblies can be dismantled in 1-2 min and product is available in 400 ml aerosol can.

Fast-Cure Silicone is stable in harsh environments.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 24, 2008 Suited for wire tacking, selective sealing, vibration dampening, and rework/repair applications on PCBs, Loctite® 5210(TM) is highly thixotropic silicone material that has dispense times as little as 31 sec (2 connectors) and tack-free time of less than 5 min. Non-corrosive room temperature vulcanization (RTV) silicone material cures at room temperature and will hold its form upon dispense; there is no spreading or migration to other locations where it is not desired.

Semisolid Primer optimizes anaerobic adhesive performance.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 22, 2008 Loctite® QuickStix(TM) 7088(TM) Primer enhances performance and accelerates cure of anaerobic machinery adhesives used in threadlocking, thread sealing, gasketing, and retaining applications. Featuring environmentally friendly formulation free of solvents and VOCs, product is recommended for use on plated, anodized, and galvanized parts as well as inactive metals. It may also be used on cold metals and assemblies that feature large gaps or deep threads.

Flexible Light Cure Adhesive suits medical device assembly.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 18, 2008 Curing tack-free within seconds, Loctite® 3974(TM) permanently bonds materials with differing coefficients of thermal expansion and accommodates substrate expansion/contraction. Single-component acrylic adhesive cures upon exposure to UV or visible light and can be used on glass, thermoplastic, and metal assemblies for medical device bonding, potting, and sealing applications. Characteristics include A70 Shore hardness and 100% elongation.

Spray Insulation bonds insulation to metal ducts/cabinets.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 15, 2008 Adhesin® 56-5545(TM) water-based adhesive for wet-bonding insulation to metal ducts and cabinets may be applied using spray gun or hand-applied with brush or roller. Offering UL Class 1 certification, it meets ASTM E-84 and ASTM C-916 requirements and dries in less than 10 min. For proper drying, adhesive must be used with at least one porous substrate. It can be used on painted or unpainted metals and is available in 5 gal pails and 275 gal tote containers.

Base Coating offers corrosion resistance for light metals.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 03, 2008 Based on titanium electrodeposited oxides, Alodine® EC2(TM) ElectroCeramic Coating provides chemical, corrosion, temperature, and abrasion resistance, extending life of parts exposed to harsh operating conditions. Product readily coats aluminum, aluminum alloys, titanium, and titanium alloys, as well as aluminized, aluminum-plated, and IVD aluminum substrates. Despite hardness of 800 vickers, coating is flexible and offers suitable base for paints, adhesives, sealants, and thermal spray coatings.

Adhesives are suited for magnet bonding.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 03, 2008 Loctite® 331(TM) Structural Adhesive is acid-free, 2-step acrylic that fixtures in 20 sec and develops full strength in 30 min, bonding magnets and metals of all sizes. Designed for filling large gaps, Loctite® 3060(TM) Structural Adhesive is acid-free, 2-component, external-mix acrylic featuring 2 cascading adhesive streams that automatically mix together. Loctite® E-220IC(TM) Hysol® Epoxy Adhesive is acid-free, 1-component epoxy designed for induction cure operations.

Light/Moisture Cure Adhesive bonds to silicones, plastics.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 02, 2008 Able to eliminate part racking and allow immediate quality control testing, Loctite® 5240(TM) is designed for use on medical devices that incorporate silicone materials or require flexible bond joints or coatings. It cures within 30 sec upon exposure to suitable UV/visible light source or within 24-72 hr at room temperature in shadowed areas. Adhesive meets ISO-10993 requirements and demonstrates tear strengths in excess of 75 lb/in. and elongation of 270% in cured state.

Low-Odor, Low-Bloom Adhesive bonds to various substrates.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 02, 2008 Designed for use in application environments with poor ventilation, Loctite® 455(TM) Prism® Instant Adhesive has high-viscosity gel formulation that will not bloom or run or flow on vertical surfaces. This low-odor cyanoacrylate adhesive delivers consistent cure times throughout shelf life and can bond to range of materials, such as metals, plastics, and elastomers. Offered in 10 g syringes and 200 g tubes, adhesive suits high-speed assembly applications.

Gel Threadlocker suits pinpoint and wide coverage dispensing.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Apr 01, 2008 Medium strength Loctite® 2033(TM) Gel Threadlocker is packaged in ergonomic 35 ml bottle that features pinpoint and flat-top dispense heads. Formulated for use on assemblies with threads sized ¼-1 in., it cures when confined in absence of air between close-fitting metal surfaces and prevents loosening from shock and vibration. Designed to resist most chemicals, liquids, and gases in temperatures to 150°C, it can be disassembled with hand tools.

Light Cure Adhesives suit bonding and potting applications.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jun 19, 2007 Designed to cure in seconds upon exposure to light in visible spectrum, Loctite® Indigo(TM) 3552 and 3553 feature viscosities of 200 and 3,500 cp, respectively. They are suited for use with UV-blocking clear and select colored substrates including translucent variations of blue, purple, gray, white, and green. Both acrylic adhesives are ISO 10993 biocompatibility tested, offer fluorescence for inspection, and adhere to various plastics including polycarbonate, PVC, and ABS.

Pre-Saturated Wipes provide semi-permanent mold release.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jun 18, 2007 Non-migratory Frekote® 55-NC(TM) Wipes chemically bond to mold surface to form micro-thin film that is non-contaminating and stable at extremely high temperatures. They can be wiped on and cured at room temperature and will maintain performance through multiple release cycles. Pre-saturated wipes are suited for releasing thermoset and prepreg epoxies, polyester resins, thermoplastics, adhesives, and rotational molded plastics.

LED Spot Curing System offers high intensity output.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jun 18, 2007 Comprised of LED light source, LED controller, and interconnecting cables, Loctite® CureJet(TM) 405 LED safely and immediately cures UV- and visible light-cure adhesives. Source provides 1.1 W/cm² output over 0.38 in. dia cure area, and controller can be actuated by external signal or footswitch. Operated in timed or continuous-duty modes, stackable solution offers instant on/off capabilities, internal diagnostics, and digital I/O port with optional PLC interface cable.