Company News

Austin Foam Plastics, Inc. Certified As a Women’s Business Enterprise

May 8, 2017

Well established packaging engineering firm & foam fabricator meets national certification standards as a women-owned business

Austin, TX, February 13, 2017– Austin Foam Plastics, Inc. (AFP, Inc.), Since its inception in 1978 in Austin Texas AFP has been a leader in providing Engineered Packaging and prides itself on its loyalty to its customers, suppliers, and employees. Upon the... Read More

Don Fritz of Multi-Pack Solutions to Speak at Global Pouch Forum

May 8, 2017

MT. PROSPECT, IL: Multi-Pack Solutions™ announces that Don Fritz, Vice President of Sales at Multi-Pack Solutions, will participate in the panel discussion, “Co-Packers Panel on Their Role in Pouch Innovation”, at the Global Pouch Forum in Miami, June 15th from 2:00 - 3:30.

“I’m honored to have been asked to participate on this panel,” said Don. “There are a lot of... Read More

Infiana Presents Itself at the PSTC Tape Summit 2017

May 5, 2017

Specialty Films Manufacturer Underlines North American Market Presence

Malvern(USA) - The PTSC TAPE Summit 2017, which takes place from May 15th to 19th in Las Vegas, counts among the most important events for the pressure sensitive market (PSM). The annual conference is organized by the Pressure Sensitive Tape Council (PSTC), the North American trade association for tape manufacturers... Read More

Bison Stainless Tube Receives ISO 9001:2015 Certification

May 5, 2017

FREEPORT, TX April 6, 2017. Bison Stainless Tube LLC. is proud to announce it has successfully upgraded from ISO 9001:2008 to the new ISO 9001:2015 for the sales and distribution of stainless steel tubing. The first part of the process was to have an external Gap Analysis Audit to determine what additional processes and documents were required to meet the new standard. Then, Bison Stainless... Read More

Opening Ceremony for the New Building

May 5, 2017

The new office building was officially opened for business on April 12, 2017. Among other things, it houses the Flottweg Academy, Research and Development, the Design department, and the human resources department. Both the high-quality office furniture as well as the architecture of the building itself reflect our company's values both inside and out.

We find the consistency of... Read More

Zober Industries is Excited to Announce its Newest Surface Mount Assembly Line

May 4, 2017

Zober Industries, located in Croydon, PA, has added a new Surface Mount Assembly Line to better serve our customers for Printed Circuit Board Assembly needs.

We have added a new SMT line with EKRA E5-36 Large Board printer, two FUJI AIMEX IIS and BTU International Pyromax 125A oven which enable a flexible platform for all types of production to board size up to 27” x 30.375”. It... Read More

In 2017 ABX Engineering Celebrates Over 31 Years of Serving Our Customers Offering Full Turnkey Manufacturing, from New Product Introduction Through Volume Turnkey Manufacturing and Electromechanical Assembly

May 4, 2017

ABX is ISO 9001-2008, ISO 13485-2003 and AS9100C certified, ITAR registered with fully trained workforce to IPC 610 Class II & Class III, J-STD-001 with certified trainers on staff. Production is on-shore with 55,000 square foot of manufacturing facilities in Burlingame, California and sales support offices in San Diego CA and Dedham MA.

ABX will be exhibiting at at the BIOMEDevice show... Read More

Flexible Packaging Industry Calls on Ship & Shore Environmental, Inc. for Guidance on Design, Environmental Sustainability & Energy Efficiency

May 3, 2017

Growing demand leads numerous Companies to request plant design and equipment specification, in addition to pollution control services

Long Beach, CA, May 1, 2017- Ship & Shore Environmental Inc. a global environmental, pollution abatement and energy solutions firm, today announced that it has recently signed a number of new packaging industry clients, two of which are in Southern... Read More

Walk this Way: 3D Printing Drives New Advancements in Foot Orthotics

May 3, 2017

Patients become more independent, increasingly mobile, and highly active with 3D printing

VALENCIA, Calif.- Millions of people worldwide are impacted by debilitating foot pain, making it difficult to accomplish such daily activities as climbing stairs or taking a walk. Enter 3D printing. Stratasys Direct Manufacturing is now collaborating with Peacocks Medical Group, a leading medical... Read More

Jordi Labs' President, Dr. Mark Jordi, will be Presenting at BIOMEDevice Boston 2017

May 3, 2017

Jordi Labs is proud to present at the at BIOMEDevice Boston 2017, to be held on May 3 & 4, 2017 at the Boston Convention & Exhibition Center in Boston, Massachusetts. Jordi Labs is a recognized leader in Extractables & Leachables (E&L) testing for biopharmaceuticals.

At the event, Dr. Mark Jordi will educate the biopharmaceutical community on the importance of the analysis of E&L... Read More

Kennedy Space Center

May 3, 2017

US Heavy Haul proudly announces a new contract between a large space agency supplier and our company to transport 21 loads from the Biloxi MS area to Kennedy Space Center, Cape Canaveral, FL.

These are all high value loads, all over dimensional. They will require the use of escort services, super load permits and will also be tracked and followed by NASA official. As new information is... Read More

Rockwell Automation to Present on Safety Technology and Trends at Iron and Steel Industry Event

May 3, 2017

AISTech presentations to focus on modernizing safety systems and machine safety amid evolving workforce

MILWAUKEE, May 1, 2017 - Engineering professionals from Rockwell Automation will be leading technical presentations on worker and machine safety at the 2017 AISTech event from May 8 to 11 in Nashville, Tennessee. Hosted by the Association for Iron & Steel Technology, the conference is... Read More

Camarillo Manufacturer Responds to White House Call for Ideas

May 3, 2017

Says federal regulations slow business, create red tape

President Trump probably won’t come knocking, but a Camarillo business has extended an invitation to the White House to have members of the current administration come to Ventura County and discuss how the feds can make good on promises to help the U.S. manufacturing industry.

In March, new Commerce Secretary Wilbur Ross... Read More

Plymouth Tube Receives the 2017 Rusty Demeules Award

April 28, 2017

RUSTY DEMEULES AWARD RECOGNIZES ORGANIZATION WITH COMMITMENT TO EXCELLENCE IN SAFETY

CHICAGO, April 26, 2017 - The Fabricators & Manufacturers Association, International (FMA) and CNA today announced Plymouth Tube of Streator, Illinois as the winner of the 2017 Rusty Demeules Award for Safety Excellence. The award is presented by FMA, sponsored by CNA and created by FMA's Safety... Read More

OFS Announces Charter Membership in New Fiber Optic Sensing Association (FOSA)

April 28, 2017

Norcross, Georgia, April 26, 2017 - OFS, a leading designer, manufacturer and supplier of innovative fiber optic products, announced today that it is a founding member of the newly-established Fiber Optic Sensing Association (FOSA).

FOSA’s mission is to educate industry, government and the public on the benefits of cutting-edge fiber optic sensing technology and its application in... Read More

Guill Tool & Engineering Provides Mercury Wire Products, Inc. with Increased Manufacturing Efficiencies

April 28, 2017

Mercury Wire Products, Inc.

For more than 50 years, Mercury Wire has designed and manufactured wire and cable solutions across a vast range of industries. With a rich history of innovation, application of lean manufacturing best practices, and a solutions-oriented culture, Mercury Wire consistently provides its customers with the highest quality custom wire and cable and integrated... Read More

Triatek receives Global Impact Award from the Metro Atlanta Chamber of Commerce

April 28, 2017

Triatek recognized for global business growth and contributing to the global fluency of Atlanta

ATLANTA, GEORGIA – On Wednesday, April 19, 2017 Triatek received the Global Impact Award in the Global Business Growth category from the Metro Atlanta Chamber of Commerce during the 8th Annual Global Impact Awards held at the Georgia Aquarium.

The Global Impact Awards honor metro... Read More

Key Technology Wins US$9 Million Deal with Lutosa, McCain’s Belgian Subsidiary

April 28, 2017

Order includes New VERYX® Digital Sorters to Inspect Processed and Finished Frozen Potato Strips

April 27, 2017 – Key Technology has been selected to equip a new production line at Lutosa, a subsidiary of McCain Foods Limited, with a complete solution of their optical inspection and material handling equipment that will prominently feature their new VERYX® digital sorters in a... Read More

Extreme Sandbox and Komatsu Host 40 students Who Traveled 1,000 Miles to Learn More about the Construction Industry

April 28, 2017

Rolling Meadows, Ill., - April 27, 2017 – Forty high school students from Warren County High School in Warrenton, NC, took a 20-hour bus ride to Hastings, MN, to learn about job prospects in the construction industry and how to operate Komatsu equipment. This unusual field trip is the result of a grant from the North Carolina Department of Transportation Fund.

“We are so pleased to... Read More

NEL Pretech to Offer Private Industrial CT Educational Sessions

April 28, 2017

Contract dimensional inspection lab offers free, hands-on experience to raise awareness of Industrial CT to the manufacturing community.

Tinley Park, IL, 1BApril 28, 2017– Nel PreTech, the nation’s only contract dimensional inspection lab accredited for computed tomography, announced today that it will be offering private, hands-on CT demonstrations at their Tinley Park, Illinois... Read More