NuSil Technology LLC

Adhesives & Sealants

Electronic Packaging Material is thermally conductive.

With nominal thermal conductivity of 1 W/mk, EPM1-2493 silicone thermal interface material offers bond lines as thin as 5 microns and is suited for use in electronic applications. This pourable, conformal liquid, with 1:1 mix ratio, can be used to adhere materials with differing coefficients of thermal expansion (CTE), reducing stress during thermal cycling. Adhesive strength can be improved via...

Read More »
Adhesives & Sealants

Electronic Packaging Material is thermally conductive.

With nominal thermal conductivity of 1 W/mk, EPM1-2493 silicone thermal interface material offers bond lines as thin as 5 microns and is suited for use in electronic applications. This pourable, conformal liquid, with 1:1 mix ratio, can be used to adhere materials with differing coefficients of thermal expansion (CTE), reducing stress during thermal cycling. Adhesive strength can be improved via...

Read More »
Adhesives & Sealants

High-Purity Gels exhibit minimal moisture permeability.

Available with refractive index of 1.54 and viscosities from 3,500-8,000 cP, LS-3354, LS2-3354, and LS3-3354 are designed for potting, encapsulating, backfilling, and dampening applications requiring soft gel with optical clarity. Cure can be achieved at ambient temperatures with humidity or accelerated with heat, and gels can be removed for rework if needed. Available in 1:1 mix ratio, products...

Read More »
Adhesives & Sealants

High-Purity Gels exhibit minimal moisture permeability.

Available with refractive index of 1.54 and viscosities from 3,500-8,000 cP, LS-3354, LS2-3354, and LS3-3354 are designed for potting, encapsulating, backfilling, and dampening applications requiring soft gel with optical clarity. Cure can be achieved at ambient temperatures with humidity or accelerated with heat, and gels can be removed for rework if needed. Available in 1:1 mix ratio, products...

Read More »
Silicone Gel offers refractive index of 1.40.
Adhesives & Sealants

Silicone Gel offers refractive index of 1.40.

Carpinteria, CA (Vocus) May 19, 2009 -- NuSil Technology (http://www.nusil.com) (www.nusil.com), a cutting-edge manufacturer of silicone-based materials for aerospace, aircraft, electronics and photonics industries, is set to release its LS-3140 at EuroLED 2009. LS-3140 is an optically clear, encapsulating gel with a refractive index of 1.40. Samples will be available to view at NuSil's stand...

Read More »
Silicone Gel offers refractive index of 1.40.
Adhesives & Sealants

Silicone Gel offers refractive index of 1.40.

Carpinteria, CA (Vocus) May 19, 2009 -- NuSil Technology (http://www.nusil.com) (www.nusil.com), a cutting-edge manufacturer of silicone-based materials for aerospace, aircraft, electronics and photonics industries, is set to release its LS-3140 at EuroLED 2009. LS-3140 is an optically clear, encapsulating gel with a refractive index of 1.40. Samples will be available to view at NuSil's stand...

Read More »
Materials

Aerospace Material suits solvent-resistant applications.

Fluorosilicone high consistency rubber (HCR), FS-3780, is designed to endure harsh environments where finished parts are exposed to fuels and extreme temperature conditions. Delivered as uncatalyzed HCR, it requires addition of platinum- or peroxide-base catalyst to cure with heat. It can be used for transfer or compression molded parts - gaskets, stoppers, seals - and can also be extruded or...

Read More »
Materials

Aerospace Material suits solvent-resistant applications.

Fluorosilicone high consistency rubber (HCR), FS-3780, is designed to endure harsh environments where finished parts are exposed to fuels and extreme temperature conditions. Delivered as uncatalyzed HCR, it requires addition of platinum- or peroxide-base catalyst to cure with heat. It can be used for transfer or compression molded parts - gaskets, stoppers, seals - and can also be extruded or...

Read More »
Materials

Dielectric Gels suit electronic packaging applications.

Low-outgassing EPM-2480, EPM-2481, and EPM-2482 are designed for encapsulation of chip packages in devices where outgassing-related contamination would be problematic. Able to cure into soft, compliant silicone, products help reduce stress on electronic assemblies during temperature cycling while protecting against environmental factors and shock. Types EPM-2480 and EPM-2481 are based on dimethyl...

Read More »
Materials

Dielectric Gels suit electronic packaging applications.

Low-outgassing EPM-2480, EPM-2481, and EPM-2482 are designed for encapsulation of chip packages in devices where outgassing-related contamination would be problematic. Able to cure into soft, compliant silicone, products help reduce stress on electronic assemblies during temperature cycling while protecting against environmental factors and shock. Types EPM-2480 and EPM-2481 are based on dimethyl...

Read More »
Adhesives & Sealants

Electronic Packaging Material is thermally conductive.

With nominal thermal conductivity of 1 W/mk, EPM1-2493 silicone thermal interface material offers bond lines as thin as 5 microns and is suited for use in electronic applications. This pourable, conformal liquid, with 1:1 mix ratio, can be used to adhere materials with differing coefficients of thermal expansion (CTE), reducing stress during thermal cycling. Adhesive strength can be improved via...

Read More »
Adhesives & Sealants

Electronic Packaging Material is thermally conductive.

With nominal thermal conductivity of 1 W/mk, EPM1-2493 silicone thermal interface material offers bond lines as thin as 5 microns and is suited for use in electronic applications. This pourable, conformal liquid, with 1:1 mix ratio, can be used to adhere materials with differing coefficients of thermal expansion (CTE), reducing stress during thermal cycling. Adhesive strength can be improved via...

Read More »
Adhesives & Sealants

High-Purity Gels exhibit minimal moisture permeability.

Available with refractive index of 1.54 and viscosities from 3,500-8,000 cP, LS-3354, LS2-3354, and LS3-3354 are designed for potting, encapsulating, backfilling, and dampening applications requiring soft gel with optical clarity. Cure can be achieved at ambient temperatures with humidity or accelerated with heat, and gels can be removed for rework if needed. Available in 1:1 mix ratio, products...

Read More »
Adhesives & Sealants

High-Purity Gels exhibit minimal moisture permeability.

Available with refractive index of 1.54 and viscosities from 3,500-8,000 cP, LS-3354, LS2-3354, and LS3-3354 are designed for potting, encapsulating, backfilling, and dampening applications requiring soft gel with optical clarity. Cure can be achieved at ambient temperatures with humidity or accelerated with heat, and gels can be removed for rework if needed. Available in 1:1 mix ratio, products...

Read More »
Silicone Gel offers refractive index of 1.40.
Adhesives & Sealants

Silicone Gel offers refractive index of 1.40.

Carpinteria, CA (Vocus) May 19, 2009 -- NuSil Technology (http://www.nusil.com) (www.nusil.com), a cutting-edge manufacturer of silicone-based materials for aerospace, aircraft, electronics and photonics industries, is set to release its LS-3140 at EuroLED 2009. LS-3140 is an optically clear, encapsulating gel with a refractive index of 1.40. Samples will be available to view at NuSil's stand...

Read More »
Silicone Gel offers refractive index of 1.40.
Adhesives & Sealants

Silicone Gel offers refractive index of 1.40.

Carpinteria, CA (Vocus) May 19, 2009 -- NuSil Technology (http://www.nusil.com) (www.nusil.com), a cutting-edge manufacturer of silicone-based materials for aerospace, aircraft, electronics and photonics industries, is set to release its LS-3140 at EuroLED 2009. LS-3140 is an optically clear, encapsulating gel with a refractive index of 1.40. Samples will be available to view at NuSil's stand...

Read More »
Materials

Aerospace Material suits solvent-resistant applications.

Fluorosilicone high consistency rubber (HCR), FS-3780, is designed to endure harsh environments where finished parts are exposed to fuels and extreme temperature conditions. Delivered as uncatalyzed HCR, it requires addition of platinum- or peroxide-base catalyst to cure with heat. It can be used for transfer or compression molded parts - gaskets, stoppers, seals - and can also be extruded or...

Read More »
Materials

Aerospace Material suits solvent-resistant applications.

Fluorosilicone high consistency rubber (HCR), FS-3780, is designed to endure harsh environments where finished parts are exposed to fuels and extreme temperature conditions. Delivered as uncatalyzed HCR, it requires addition of platinum- or peroxide-base catalyst to cure with heat. It can be used for transfer or compression molded parts - gaskets, stoppers, seals - and can also be extruded or...

Read More »
Company News

NuSil Technology Appoints Huntsman as Exclusive Distributor in Brazil

Carpinteria, California - April 20, 2007 - NuSil Technology (www.nusil.com), a cutting-edge manufacturer of silicone-based materials for healthcare, aerospace, electronics and photonics, has appointed Huntsman Quimica Brasil Ltda., a subsidiary of Huntsman Corp. (NYSE:HUN), as its exclusive distributor of products for the electronics industry in Brazil. Huntsman Advanced Materials, a supplier of...

Read More »
Company News

NuSil Technology Appoints Huntsman as Exclusive Distributor in Brazil

Carpinteria, California - April 20, 2007 - NuSil Technology (www.nusil.com), a cutting-edge manufacturer of silicone-based materials for healthcare, aerospace, electronics and photonics, has appointed Huntsman Quimica Brasil Ltda., a subsidiary of Huntsman Corp. (NYSE:HUN), as its exclusive distributor of products for the electronics industry in Brazil. Huntsman Advanced Materials, a supplier of...

Read More »

All Topics