Company News

Share Like Tweet Add Email

Latest New Product News from
Larson Electronics, LLC

Electrical Equipment & Systems

LED Task Light includes 50 ft retractable cord reel.

August 19, 2015

Completely weatherproof and impact resistant, 14 in. Model WAL-DL-60LED-M-GCR50 utilizes 60 LEDs to produce 120 lumen flood beam. Drop light includes embedded on/off rocker switch in handle and detachable magnetic hook that allows for 360° of rotation. Cord reel is designed for lift/drag of up to 50 ft of 18/2 SVT cable and has additional 2 ft for safety wrap and hook up. Constructed of durable steel, unit has yellow powder coat finish as well as ball stop and ratchet with lockout feature. Read More

Electrical Equipment & Systems

Portable Explosion Proof LED Light mounts on base stand.

August 13, 2015

Featuring 150 W LED light head mounted atop base stand fabricated from non-sparking aluminum, Model EPL-16BS-1X150LED-X24I-50 produces flood pattern that can illuminate enclosed areas and hazardous locations where flammable vapors, gases, and dusts may be present. Lamp head adjusts up or down 90°, is T5 temperature rated, and retains 80% of its lumen output after 60,000 hours of use. Light operates on 120–277 Vac stepped down to 24 Vdc via inline transformer. Read More

Electronic Components & Devices, Display & Presentation Equipment, Electrical Equipment & Systems

IR LED Light Emitter (12 W) produces 500 x 50 ft beam.

August 6, 2015

Drawing 12 W from 12 V electrical system, 4 in.² LED10W-4R-IR produces 500 ft long x 50 ft wide beam of light in 750, 850, or 940 nm range. Paired with high-purity, 10° optics, 4 Edison Edixeon 3 W LEDs produce 180 lm each to form tightly focused spot beam with limited spread or light spillage. IP68-rated unit is also available with 35° flood optics. Yolk type trunnion mount, fitted with single mounting stub, allows LED light to be adjusted and locked into any desired position once mounted. Read More

Electrical Equipment & Systems, Electronic Components & Devices

Power Converter features heavy-duty waterproof design.

August 5, 2015

Featuring industrial grade male plug and 3 ft of cable on input end and 1 ft cable with flying leads on other end, 16 A Model DCP-16-HD converts commonly used 120–240 Vac electrical current to 12 or 24 Vdc. Unit features IP67-rated waterproof design and is wet area approved, making it suitable for indoor or outdoor use. Integral short circuit, over voltage, over temperature, and overload protection will shut transformer down or reduce output in case of faults to protect connected equipment. Read More

Electrical Equipment & Systems

High Bay LED Light features explosion proof design.

July 27, 2015

Offering alternative to HID and incandescent high bay lighting, Model EPLC2-HB-212W-LED-PND produces 26,500 lm while drawing only 212 W. Advanced LED light assembly in tandem with high efficiency heat dissipating design helps light to achieve 60,000 hr operational life. Pendant mounted with user-supplied rigid conduit, light can run on voltages from 100–277 Vac, 50/60 Hz. Unit is approved for Class 1 Division 2 and Class 2 Division 1 and 2 environments. Read More

Display & Presentation Equipment, Electrical Equipment & Systems

High Bay 150 W LED Light has explosion proof design.

July 17, 2015

Producing 13,000 lm while drawing 150 W, Class 1 Division 1 & 2 and Class 2 Division 1 & 2 explosion proof light has powder-coated, copper-free aluminum alloy body. Heat dissipating design and LED technology help fixture achieve 60,000 hr rated lifespan with 80% lumen retention. Operated with 100–277 Vac without any modifications, IP67-rated fixture offers 6,000K color temperature and 75 CRI. Unit comes with 100 ft of 16/3 chemical- and abrasion-resistant SOOW cord. Read More

Electrical Equipment & Systems, Architectural and Civil Engineering Products

Portable LED Light Tower features explosion proof design.

July 15, 2015

Mounted on top of 4-leg aluminum quadpod equipped with wheels for portability, 300 Watt Model EPL-QP-2X150RT-100 provides 14,500 ft² of work area coverage with 26,000 lumens of light. Each LED light head contains twelve 12.5 W LEDs producing 1,084 lumens each. LEDs are arranged in rows and paired with high-purity optics to produce 60° flood beam while drawing only 1.25 A on 120 V system. Adjustable quadpod can be extended to 12 ft and collapsed to 7 ft. Read More

Electrical Equipment & Systems

LED Light provides 2,500 ft spot beam.

July 14, 2015

Constructed with single CREE 50 W LED, Model LED50WRE produces 3,350 lumens of intense light. Unit uses high output reflector to produce narrow 10° spread spot beam approximately 2,500 ft long. Measuring 6.7 in. in diameter, lamp and reflector assembly has polycarbonate lens that is sealed against water and dust to provide IP68 rating and weatherproof protection. Operating from 12–32 Vdc with temperature range of -40 to 85°C, light is suspended within form fitting trunnion mount. Read More

Architectural and Civil Engineering Products

Pneumatic Telescoping Light Mast extends to 13.5 ft.

July 8, 2015

Constructed of heat-treated aluminum tubing, PLM-13.5-CCTV-NAC can deploy 75 lb of lights, security cameras, and other electrical equipment to heights of 13.5 ft. Rugged light tower has 5 sections and includes locking top mounting plate for facilitated removal of mounted equipment. Air compressor (not included) is used for elevation, and air release valve at base of mast lets operators lower tower to 5 ft. Internally routed, 16/3 AWG wiring ensures protection from becoming frayed or damaged. Read More

Display & Presentation Equipment, Electrical Equipment & Systems

Integrated LED Light Fixture has explosionproof design.

July 2, 2015

With integrated LED assembly producing 8,000 lm, EPL-48-2L-ITG-LED carries T6 temperature rating and can be used where flammable chemical/petrochemical vapors exist or have potential to exist. This linear, 2-lamp fixture features 4 ft long LED tube design emitters with 50,000 hr service life rating, and each lamp is individually dimmable. Fixture is approved for Class 1 Division 1, Groups C/D; Class 1 Division 2, Groups A/B/C/D; and Class 2 Division 1 and 2, Groups E/F/G environments. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Vision Systems, Display & Presentation Equipment

Linear 104 W LED Fixture has low-profile, explosionproof design.

June 24, 2015

Class 1 Division 1 & 2, Class 2 Division 1 & 2 rated LED light fixture, EPL-LP-48-LED, provides 13,520 lm while drawing 104 W of power. Protected behind tempered borosilicate glass tube that is protected by aluminum wire guard, 2 offset LED assemblies within fixture allow 100° horizontal beam spread and 140° vertical beam spread. Operating from 100–277 Vac, 5 in. wide product carries paint spray booth, ATEX, and IECEx certifications and has T5 temperature rating. Read More

Electrical Equipment & Systems, Controls & Controllers

Power Distribution System (30 KVA) incorporates NEMA 3R panels.

June 24, 2015

Enabling operators in industrial settings to tap into power sources independent of work area, MGS-30KVA-6X120-2X240 operates with 480 Vac 3-phase and steps down to 120 Vac single-phase and 240 Vac 3-phase. Transformer, mounted to 1/8 in. thick diamond plate, makes 120 V available via 6 outlets and 240 V available via 2 outlets. To facilitate transport, distribution assembly is mounted onto 2 in. square steel frame with rectangular carbon steel skid pockets and top-mounted eyelet. Read More

Electrical Equipment & Systems

Temporary Power Distribution System can be used indoors/outdoors.

June 19, 2015

Rated at 50 kVA, MPD-480-50K-200MB-7X20-7X30-28X120.120-SSDC-W converts 480 Vac 3-phase to 120/240 Delta/Delta electrical current. Portable unit, which features 42 circuits enclosed within NEMA 3R, 200 A panel, includes seven 20 A double-pole breakers, seven 30 A double pole breakers, and twenty-eight 20 A single-pole breakers. Transformer and load center assembly are mounted to steel cart frame, which has 2 run flat style tires and can be loaded on truck or other conveyance for transport. Read More

Electrical Equipment & Systems

Dual Color LED Signal Light operates in hazardous locations.

June 18, 2015

Equipped with 110 dBA audible horn and two 10 W LED lamps that produce amber and red output, Model HAL-TL-2X10W-C-PA is approved for hazardous environments where explosive and flammable gases, vapors, and dusts may exist. Lights can be configured to operate on steady burn, strobe, or steady burn and strobe combination. Each LED lamp offers 1,050 lm output. Carrying T3 temperature rating, Model HAL-TL-2X10W-C-PA is weatherproof, dust-proof, NEMA 4X-rated, and marine-rated for wet environments. Read More

Display & Presentation Equipment, Electrical Equipment & Systems

Linear Low-Profile 52 W LED Fixture has explosionproof design.

June 8, 2015

Producing 6,760 lm while drawing 52 W, 5 in. wide EPL-LP-24-LED employs 2 offset LED assemblies to provide 100° horizontal beam spread and 140° vertical beam spread. LED assembly is protected behind tempered borosilicate glass tube, which is protected by aluminum wire guard, and copper-free aluminum alloy body is powder coated. Operating from 100–277 Vac, fixture carries T5 temperature rating as well as paint spray booth, ATEX, and IECEx certifications. Read More

Electrical Equipment & Systems

Temporary Tunnel String Light Set features 51 LED lamps.

June 5, 2015

Consisting of 51 industrial-grade LED lamps with 10 ft of 12/4 SJTW cable between each unit, Model WAL-SL-51-LED-12.4 stretches total of 510 ft in length. Each globe light is equipped with A19-style LED bulb that produces 1,050 lm, providing total of 53,550 lm of bright white illumination. Each lamp covers approximately 5–8 ft radius with 10–15 ft candles of light. Constructed from lightweight aluminum, lamp housings have impact- and shatter-resistant polycarbonate diffuser. Read More

Display & Presentation Equipment, Electrical Equipment & Systems

High Bay 150 W LED Light Fixture has explosionproof design.

May 29, 2015

Designed for ceiling mount applications, universal voltage-capable EPL-HB-150LED-RT-CM can be operated with 100–277 Vac and provides 13,000 lm while drawing 150 W. Copper-free, cast aluminum alloy body is powder coated and carries IP67 rating. Able to be used in Class 1 Division 1 & 2 as well as Class 2 Division 1 & 2 environments, vibration- and impact-resistant fixture features multiple LED drivers to help increase operational life in case of driver or LED failure.
Read More

Electrical Equipment & Systems

Explosion Proof String Lights use 100 W incandescent bulbs.

May 29, 2015

Supplied with portable power transformer, Model EPL-SL-8X75-12V-TXF contains 8 work lights equipped with aluminum hooks and connected in series along 80 ft of 16/3 SOOW explosion proof cord. Additional 20 ft of cord is used to connect transformer to lamps to provide ample length for connection outside of hazardous area. Constructed with machined aluminum housings, cast aluminum guard, and tempered glass lamp globe, lights resist damage from chemicals, abrasions, vibrations, and impacts. Read More

Electrical Equipment & Systems, Architectural and Civil Engineering Products

Explosion Proof LED Light Tower features rechargeable design.

May 27, 2015

Powered by lithium ion batteries that provide 16-hour runtime on single charge, Model EPL-TP-2XRUL10 produces 140,000 candela peak beam intensity reaching over 1,400 ft in length. Waterproof tower has 2 articulating heads which allow positioning through 90° of movement. LED lamp heads are combined with reflector to produce two 225 lm high beams and two 100 lm low beams. Constructed of impact-resistant nylon, housing has rubberized coating and ribbed handle for maximum durability and grip. Read More

Architectural and Civil Engineering Products, Display & Presentation Equipment, Electrical Equipment & Systems

Skid Mount, 5-Stage LED Light Mast extends via manual crank winch.

May 27, 2015

Serving locations requiring elevated illumination, LM-SMDE-30-8-5S-4X400LTL-LED-RD-E2E employs four 400 W LED lamps in wet area-suitable light heads that produce combined total of ~208,000 lm. Boom can be extended to 30 ft, collapsed to 8.83 ft, allows for 360° of rotation, and is constructed of square steel tubing. Mast is elevated using included 2,500 lb manual hand crank winch with 3/16 in. galvanized braided steel cable, and cube-style frame measures 48 x 48 x 53 in. Read More

Other Company News from
Larson Electronics, LLC