Company News

Larson Electronics, LLC

9419 E. U.S. Hwy. 175, Kemp, TX, 75143, USA

  • 800-369-6671

Latest New Product News from
Larson Electronics, LLC

display & presentation equipment, electrical equipment & systems

LED Pedestal Mount Work Light (150 W) is suitable for wet areas.

May 2, 2016

Capable of illuminating 18,000 ft², BML-150LED employs 30 CREE XLamp 5 W LEDs that produce 493 lm each (14,790 lm total) and are arranged in rows and paired with high-purity optics to produce a focused, 25° spot beam. Features include adjustable light head, inline AC/DC transformer for connection to 110–277 Vac, aluminum frame, weatherproof construction, and four 200 lb grip magnetic feet. Light comes with 25 ft of cord terminated with straight blade plug. Read More

display & presentation equipment, electrical equipment & systems

Multi-Colored LED Signal Stack Light has 110 dBA audible horn.

April 29, 2016

Used for routing traffic and processing status indications, Class 1 Division 2 rated HAL-TL-5X10W-C-PA is approved for use in hazardous environments and features five 10 W LED lamps that produce amber, red, blue, green, and white light output. Each LED lamp offers 1,050 lm output, and lights can be configured to operate on steady burn, strobe, or combination thereof. Audible alarm setup sounds unique tone per user setting. Unit can operate on 120 or 240 Vac or 24 Vdc. Read More

architectural and civil engineering products, electrical equipment & systems

Mobile Light Tower illuminates up to 5 acres.

April 27, 2016

Equipped with 8.1 kW Marathon generator powered by Kubota Z482 EPA Tier 4 diesel engine, Model WCDE-7.5K-4X1000W-MLK utilizes four 1,000 W metal halide lamps to produce 440,000 lumens of light. IP67-rated lamps are paired with reflectors, enabling each light head to produce far reaching, intense, and well-focused beam without overcast, glare, or light spillage. Towable, self-contained system reaches 25 ft when fully deployed and folds down to 8 ft for storage and transport. Read More

electrical equipment & systems

Emergency Exit Light operates in hazardous locations.

April 26, 2016

Constructed with two 10 W LED light fixtures, HAL-EMG-EXT-12W-2L Bug Eye Lighting System features enclosed battery backup ballast that allows operation for 90 min once power is lost. LED lamps, protected by Pyrex globe and polycarbonate globe guard, produce 1,050 lm each. Maintenance-free, sealed, high-temperature Nickel-Cadmium battery is protected from deep discharge by solid state circuitry which senses low voltage, turning unit off before damage can occur. Read More

display & presentation equipment, electrical equipment & systems, electronic components & devices, vision systems

High Intensity 25 W LED Spotlight produces 1,000 ft long beam.

April 20, 2016

Offering 12–32 V compatibility and 50,000 hr service life, LED25WRE-CPR uses 25 W CREE LED and reflector to produce 2,750 lm spot beam with 10° spread. Impact-resistant housing includes 4.5 in. dia lamp and reflector assembly protected by polycarbonate lens and sealed against water and dust to IP68. Waterproof to 3 m, light is suspended within form fitting trunnion mount and can monitor and adjust input current to maintain correct LED voltage level. Read More

display & presentation equipment, electrical equipment & systems, electronic components & devices, vision systems

Four Foot LED Bulb upgrades existing T8 fluorescent fixtures.

April 18, 2016

Rated 15.9 W, LEDT8-48-BLST produces 130 lm/W for 2,000 lm/bulb total and is designed for direct replacement of 4 ft fluorescent fixtures with G13 bases. Design does not require any rewiring, and driver allows use with fluorescent ballast without incurring damage to LED lamp. Lamp may also be used in fixture without ballast. Along with directional design producing 140° beam spread, features include polycarbonate lens, aluminum housing, and 100–277 Vac compatibility. Read More

electrical equipment & systems

Explosion Proof Extension Cord provides 3 receptacles.

April 13, 2016

Measuring 30 ft long, Model EPEXC-3X-12.3-30 extends reach of equipment in hazardous locations where power receptacles are not in close proximity to work space. Cord is fitted with 3 explosion proof twist lock receptacles constructed of non-sparking aluminum, with deep recessed contacts for protection against arcing, and powder coat finish for resistance to corrosion. Terminated with 20 A explosion proof plug, cord is oil-, chemical-, and abrasion-resistant. Read More

display & presentation equipment, electrical equipment & systems

Explosionproof LED Light safely illuminates hazardous locations.

April 6, 2016

Drawing 110 W, EPLC2-TRN-110W-LED produces 13,780 lm in flood pattern suited for large scale illumination. This T4 temperature-rated fixture, approved for areas deemed as hazardous locations, carries Class 1 Division 2, Class 2 Division 1 and 2, and Class 3 approvals as well as UL certifications. While 20 in. aluminum housing is optimized for heat dissipation and lends to 100,000 hr lifespan rating, aluminum trunnion mount facilitates mounting and adjustment. Read More

display & presentation equipment, electrical equipment & systems

Rechargeable 25 W LED Spotlight has ergonomic, pistol grip design.

April 5, 2016

Offering 70% lm retention at 50,000 hr, RL-85-LED-CPR uses 25 W Cree LED, along with reflector and lens configuration, that generates 2,000 lm. Convex and inset lenses capture light and project focused beam capable of reaching over 1,000 ft. Providing 2.5 hr of operation, 7.4 V Li-ion battery pack can be recharged within 3 hr from completely depleted state. Construction includes ABS shockproof polymer body, aluminum alloy light head housing, and polycarbonate lens.<br /> Read More

controls & controllers, electrical equipment & systems

Power Distribution System (10 KVA ) has 480 V welding receptacles.

April 1, 2016

Converting 480 Vac to single-phase 120 and 240 Vac, portable MGS-480.2X30A.2X60A-10K-2X240-10X120 safely enables industrial operators to tap into and utilize power sources independently of work area. There are 10 GFCI-protected, 20 A receptacles and 2 L6-30 receptacles. System also provides two 30 A, 480 V receptacles and two 60 A, 480 V receptacles for welding. Powder-coated, carbon steel frame has integrated skid pockets and top located lifting eyelet. Read More

electrical equipment & systems, portable tools

HID Handheld Spotlight generates 5,000 lumen output.

April 1, 2016

Constructed with single 55 W HID lamp, Model HL-85-HID-CPR delivers beam capable of reaching distances over 5,500 ft. Adjustable 7 in. lens gives operators ability to switch from long, narrow focused spot beam of light to wide flood beam with simple twist. Operating on 12&ndash;24 Vdc with included 16 ft coil cord terminated in cigarette plug, IP65-rated waterproof spotlight features ABS shockproof polymer body, aluminum alloy light head housing, and impact-resistant polycarbonate lens. Read More

electrical equipment & systems

LED Strip Light operates in hazardous locations.

March 31, 2016

Intended for applications where Class 1 Division 2 compliance is required, 33 Watt Model HAL-48-33W-LED-1227-20C produces 2,416 lm and operates from 120&ndash;277 Vac. Strip light is constructed of powder coated extruded aluminum and carries IP54 rating. Two adjustable end brackets allow operator to mount unit to flat surfaces and then adjust light 170° vertically. Measuring 4 ft long, light is equipped with 20 ft of 16/3 chemical- and abrasion-resistant SOOW cord.  Read More

electrical equipment & systems

LED Flood Light withstands extreme outdoor conditions.

March 31, 2016

Constructed with ten 5 Watt CREE LEDs, Model LEDLB-10R-CPR produces 3,700 lm of light output. High-intensity light features shatterproof polycarbonate lens and die-cast aluminum housing that is powder-coated for corrosion resistance. Housing incorporates integral cooling fins that release heat from LED unit. Waterproof to 3 m and sealed against dust and dirt, IP67-rated navigation light is suited for search and rescue missions on marine vessels, ATVs, and emergency vehicles. Read More

electrical equipment & systems, electronic components & devices

Step Down Spider Box provides 6 duplex 120 V outlets.

March 25, 2016

Providing source of 120 V power when only 240 V is available, Model WALSB-240.50A-6X120.20A-WP is equipped with 10 ft chemical- and abrasion-resistant cable terminated in industrial male cord cap that carries 240 V current to box, which is then stepped down to 120 V to operate equipment. Six duplex 120 V outlets provide sealed and secure connection for up to 12 devices. Constructed with powder coated steel housing, portable weatherproof box includes short circuit and overload protection. Read More

electrical equipment & systems

Lay-In Panel Light Fixture operates in hazardous locations.

March 25, 2016

Along with rear access panel for facilitated service, HAL-RA-48-6L-T5HO-480V features 20 gauge steel construction with white baked enamel finish and 3/16 in. clear tempered glass lens. Latter protects six 54 W T5HO lamps, which collectively produce 30,000 lm. Suited for hazardous locations where mounting space is limited, this Class 1 Division 2, low-profile fixture carries T3C temperature rating, is UL 844 and UL 1598 damp location listed, and operates on 347&ndash;480 Vac. Read More

display & presentation equipment, electrical equipment & systems

Bright Handheld LED Spotlight draws 36 W.

March 18, 2016

Targeting hunters and fishermen, HL-85-LED-CPR features pistol grip style, nylon handle with no-slip textured surface. Rugged, ergonomic design consists of ABS shockproof polymer body and aluminum alloy light head housing. operating on 12&ndash;24 Vdc, IP67 light features 16 ft coil cord terminated in cigarette plug and uses 7 Cree LEDs, in combination with 120 mm reflector and impact-resistant, convex, polycarbonate lens, to generate 2,000 lm. Beam reaches over 1,600 ft. Read More

electrical equipment & systems

Stop/Start Momentary Pushbutton Switch has explosionproof design.

March 16, 2016

Used for controlling machinery or process in industrial and commercial applications, EPS-2XPB-SG-MS carries Class 1, Division 1 and 2 as well as Class 2, Division 1 and 2 ratings for hazardous locations. Factory-sealed design, constructed for heavy-duty use, eliminates need for added seal fittings and compound. Rated for 10 A at 600 V, UL 698-listed switch has housing constructed with malleable iron body, cast copper-free aluminum alloy cover, and epoxy powder coat. Read More

architectural and civil engineering products, display & presentation equipment, electrical equipment & systems

Horizontal 1.600 W LED Light Mast produces 508,000 lm.

March 14, 2016

Powder coated for corrosion resistance, LM-30-HZ-4X400LTL-LED-EW-3KVA-600V features 2-section assembly that extends to 30 ft for max area coverage and collapses to 17 ft when not in use. Lighting system, comprised of four 400 W LED flood lamps that produce 52,000 lm each, is connected to power source via 4-switch control box. Each light head is on individual circuit and can be powered on/off independently. Included 3 KVA NEMA 3R transformer accepts 600 V primary input voltage. Read More

display & presentation equipment, electrical equipment & systems

IP65 Hazardous Location LED Strip Light comes with 20 ft cord.

March 11, 2016

Accommodating applications where Class 1 Division 2 compliance is required, HAL-6-IPS-LED-20 features IP65 rating, weatherproof construction (powder coated extruded aluminum), and 20 ft cord terminated with 2-wire flying lead. This 4 W, 6 in. long x 3 in. wide LED strip light produces 500 lm and operates from 120&ndash;277 Vac or 11&ndash;25 V DC/AC. Two adjustable end brackets allow mounting to flat surfaces and subsequent adjustment (170° vertically). Read More

electrical equipment & systems, portable tools

Magnetically Mounted LED Spotlight produces 1,530 lumens.

March 10, 2016

Constructed of precision machined aluminum with powder coating, impact-resistant polycarbonate lens, and IP65 rating, 18 Watt Model HMLBLT-18W-LED-25 is approved for outdoor environments where corrosion resistance and waterproof lighting is required. Light is offered in focused 25° spot beam or 60° flood beam, and provides cool white light output with color temperature of 5000K. With dual bracket design, operator can guide light through full range of vertical and horizontal movement. Read More

Other Company News from
Larson Electronics, LLC