California Micro Devices
Milpitas, CA 95035
Share:
Submounts and TVS Diodes increase UHB LED protection.
Intended for use in ultra high brightness (UHB) LED lighting applications, LuxGuard products include silicon submounts that provide integrated ESD protection at levels exceeding 15 kV HBM (Human Body Model) while also helping cushion LED from stress due to thermal expansion coefficient differences between LED and lead frame. TVS diodes, available for customers who utilize ceramic submounts, mount...
Read More »ESD Device protects antennas in mobile handsets.
Intended for FM radio, GPS, Bluetooth, and WLAN antennas, single-channel PicoGuard CM1282 features low capacitance of 0.5 pF and low insertion loss of less than -0.25 dB through 1.8 GHz. Device delivers 8 kV contact discharge protection per IEC 61000-4-2 Level 4. Available in SOD-882 lead-free package, RoHS-compliant unit meets linearity mask for 802.11 protocols.
Read More »ESD Protection Devices offer integrated impedance matching.
Incorporating PicoGuard XS architecture, which integrates inductors with ESD diodes, ExtremeESDÃ-® CM1235 and CM1236 feature 8 channels of ESD protection that meet 8 kV contact discharge requirements of IEC61000-4-2 standard, while also meeting 100 W differential impedance matching requirements of HDMI(TM) 1.3a and DisplayPort(TM) digital video standards. Housed in 16-pin TDFN package,...
Read More »ESD Protection Device ensures signal integrity.
Featuring 8 channels, PicoGuard XS CM1233-08DE provides protection for 4 pairs of differential channels, enabling designers to meet 100 W differential impedance requirements of HDMI(TM) and DisplayPort(TM) without external compensation. Device offers straight through routing and minimizes both peak clamping voltage and peak residual current. Housed in 16-pin TDFN package, unit delivers ESD...
Read More »Linear Power Regulator suits digital consumer applications.
Designed for powering DDR memory in digital consumer and PC peripheral applications, dual output Model CM3212 integrates VDDQ and VTT power supplies, VREF voltage supply, and VTT enable function for implementing Suspend to Ram sleep mode. With integrated power MOSFETs, unit can source up to 2 A of VDDQ current, and source or sink up to 2 A of VTT current. Typical dropout voltage for VDDQ is 500...
Read More »Drivers support camera phone flash LEDs.
Featuring current drive capabilities of up to 1 A, PhotonIC white LED drivers support input range of 3.0-5.5 V, switching frequency of 1 MHz, and shutdown current of less than 0.3 Ã-µA. Shutdown, torch, and 2 flash modes can be selected through single wire interface, and preview and flash currents can be programmed independently via external resistors. Model CM9410 is offered in 0.4 mm pitch...
Read More »Display Controllers are available for wireless handsets.
Model CM5100 includes VESA Standard Mobile Display Digital Interface (MDDI) based serial client consisting of one data pair, strobe pair, and power supply pair enabling data rate of up to 385 Mbps. Integrated display controller has embedded memory supporting primary TFT LCDs for resolutions up to QVGA, while secondary displays support up to QCIF+ resolution. Audio packets are transferred through...
Read More »Port Protection Devices support high-speed HDMIs.
MediaGuard CM2030 and CM2031 multifunction ASIP(TM) (Application Specific Integrated Passive(TM)) devices feature ESD, backdrive, and overcurrent protection, voltage level shifting, as well as active DDC pullups and CEC slew rate limiting. Devices connect with high speed HDMI(TM) (High-Definition Multimedia Interface(TM)) 1.3 interfaces, and are available in 38-pin TSSOP packages. CM2030 is...
Read More »EMI filter is designed for wireless handsets.
Available in 0.40 mm pitch chip scale package, Praetorian(TM) CM1452 EMI filter is offered in 4, 6, and 8 channel versions. Each channel consists of 3 pole L-C filter with min inductor value of 17 nH and nominal capacitor values of 15 pF. Device offers ESD protection up to Ã-
Read More »California Micro Devices Announces Low Noise Charge Pump/Linear Regulator LED Driver
MILPITAS, Calif., Nov. 15 / -- California Micro Devices (NASDAQ:CAMD) today announced the CM4072, a single-chip low noise charge pump/linear regulator LED (light emitting diode) driver designed to power white LEDs to backlight TFT LCD displays in wireless handsets, PDAs and LCD modules. The CM4072 is the latest addition to the PhotonIC(TM) portfolio, a product family of highly integrated,...
Read More »Submounts and TVS Diodes increase UHB LED protection.
Intended for use in ultra high brightness (UHB) LED lighting applications, LuxGuard products include silicon submounts that provide integrated ESD protection at levels exceeding 15 kV HBM (Human Body Model) while also helping cushion LED from stress due to thermal expansion coefficient differences between LED and lead frame. TVS diodes, available for customers who utilize ceramic submounts, mount...
Read More »ESD Device protects antennas in mobile handsets.
Intended for FM radio, GPS, Bluetooth, and WLAN antennas, single-channel PicoGuard CM1282 features low capacitance of 0.5 pF and low insertion loss of less than -0.25 dB through 1.8 GHz. Device delivers 8 kV contact discharge protection per IEC 61000-4-2 Level 4. Available in SOD-882 lead-free package, RoHS-compliant unit meets linearity mask for 802.11 protocols.
Read More »ESD Protection Devices offer integrated impedance matching.
Incorporating PicoGuard XS architecture, which integrates inductors with ESD diodes, ExtremeESDÃ-® CM1235 and CM1236 feature 8 channels of ESD protection that meet 8 kV contact discharge requirements of IEC61000-4-2 standard, while also meeting 100 W differential impedance matching requirements of HDMI(TM) 1.3a and DisplayPort(TM) digital video standards. Housed in 16-pin TDFN package,...
Read More »ESD Protection Device ensures signal integrity.
Featuring 8 channels, PicoGuard XS CM1233-08DE provides protection for 4 pairs of differential channels, enabling designers to meet 100 W differential impedance requirements of HDMI(TM) and DisplayPort(TM) without external compensation. Device offers straight through routing and minimizes both peak clamping voltage and peak residual current. Housed in 16-pin TDFN package, unit delivers ESD...
Read More »California Micro Devices to Present December Quarter Financial Results
MILPITAS, Calif., Jan. 8 / -- California Micro Devices (NASDAQ:CAMD) will hold a conference call on Tuesday, January 22, 2008, at 2:00 p.m. Pacific Time to present the financial results for its third quarter of fiscal year 2008, which ended on December 31, 2007. Within the USA, interested parties can access the conference call by dialing 800-218-0713. International parties may gain access by...
Read More »California Micro Devices to Present at the Tenth Annual Needham and Company Growth Conference
MILPITAS, Calif., Dec. 20 -- California Micro Devices (NASDAQ:CAMD) today announced that Robert V. Dickinson, President and Chief Executive Officer, will present at the Tenth Annual Needham and Company Growth Conference at The New York Palace Hotel in New York, New York. Mr. Dickinson is scheduled to present at 10:00 a.m. Eastern Time (ET) on Thursday, January 10, 2008. A live Web cast of...
Read More »California Micro Devices to Present at A.G. Edwards' Emerging Growth Conference
MILPITAS, Calif., Sept. 6 / -- California Micro Devices (NASDAQ:CAMD) today announced that Robert V. Dickinson, President and Chief Executive Officer, will present at A.G. Edwards' 2nd Annual Emerging Growth Conference at the New York Palace Hotel in New York, New York. Mr. Dickinson is scheduled to present at 10:45 a.m. (Eastern Time) on Wednesday, September 19, 2007. A live Web cast of...
Read More »California Micro Devices and MagnaChip Ink Strategic Agreement
Strategic Agreement Covers Foundry Business and Process Technology Transfer MILPITAS, Calif., and SEOUL, Aug. 20 / - California Micro Devices (NASDAQ:CAMD), a leading supplier of application specific analog semiconductor products for mobile handsets, personal computers and digital consumer electronics, and MagnaChip Semiconductor Ltd., a leading global designer, developer and manufacturer of...
Read More »California Micro Devices to Present at C.E. Unterberg, Towbin's Emerging Growth Conference
MILPITAS, Calif., June 26 / -- California Micro Devices today announced that Robert V. Dickinson, President and Chief Executive Officer, will present at C.E. Unterberg, Towbin's Emerging Growth Conference at the Mandarin Oriental in New York, New York. Mr. Dickinson is scheduled to present at 8:30 a.m. (Eastern Time) on Wednesday, July 11, 2007. A live Web cast of California Micro Devices'...
Read More »California Micro Devices Collaborates with SPEL Semiconductor to Add Two Leadless Molded Package Lines; Joint Investment Expected to Total $7.75 Million
MILPITAS, Calif., Jan. 24 : California Micro Devices (NASDAQ:CAMD) today announced it has completed a joint agreement with SPEL Semiconductor to expand the capacity of SPEL's Leadless Molded Package (LMP) lines and add support for two new additional small profile packages. California Micro Devices will contribute approximately $2.2 million of the total estimated $7.75 million joint investment...
Read More »