RF Industries
San Diego, CA 92126
Share:
Universal RF Adapter Kit offers white bronze plating option.
Unidapt(TM) kit is available with white bronze plating (RFA-4024-WB), which provides tarnish-free, non-magnetic solution that is also corrosion resistant and lead (Pb) free and exhibits minimal intermodulation distortion. Adapters come with gold-plated contacts and Teflon(TM) insulation. Universal center adapter, included, enables any combination of N, BNC, TNC, SMA, UHF, and M-UHF components for...
Read More »
High Frequency Test Cables come in standard and custom lengths.
MIL-DTL-17, type IX specified precision test cables feature high-grade, passivated, stainless steel SMA males with PTFE insulators and are configured for low loss and low VSWR. Electrical features include 50 W impedance, 23.8 pF/ft capacitance, 85% Vp, shielding effectiveness better than -95 dB, operating temperature range of -55 to +200Ã-
Read More »
Universal Adapter System Kit supports field/bench technicians.
Unidapt(TM) coaxial adapter system features universal adapter to join any 2 Unidapt(TM) adapters with standard coaxial interfaces. Seventy-four-piece RFA-4022 Unidapt(TM) Mega-Plus Kit helps in troubleshooting and testing 7-16 DIN, BNC, F, Mini-UHF, MCX, MMCX, N, RCA, reverse polarity SMA and TNC, SMA, SMB, TNC and UHF terminated devices. Kit contains universal tee, universal right angle adapter,...
Read More »
UHF Connectors for Heliax-® Cable
Availability of UHF connectors for LDF4-50A Ã-½ inch Andrew HeliaxÃ-® cable was limited to the secondary market when manufacturing ceased several years ago. RF Connectors division of RF Industries has released UHF male and UHF female connectors for LDF4-50A Ã-½ inch cable to fill that need. These connectors utilize the same installation process and tooling required for the...
Read More »
Variety of Bulkhead Mount SMA Connectors in Stock for OEM Applications
RF Connectors, division of RF Industries, offers a variety of SMA bulkhead mount connectors for use in OEM applications. Mounting configurations include front and rear mount with solder cup electrical terminations. Male and female SMA connector interfaces are available. Connector bodies are machined brass with nickel of Gold plating. All dielectrics are PTFE with Gold plated contacts. Part...
Read More »SMA Connectors come with male and female connector interface.
Suited for OEM applications, SMA flange mount connectors feature solder post and solder cup electrical termination. All flanges are standard .500 in. square with .102 in. dia mounting holes. Connector bodies are machined brass with nickel of gold plating, while dielectrics are TeflonÃ-® with gold plated contacts. RSA-3171 SMA jack and RSA-3231 SMA plug, have solder cups; RSA 3232-1,...
Read More »
Solderless Connectors require minimal cable preparation.
Designed to fit Times Microwave LMRÃ-®-240 & LMRÃ-®-400, Andrew Cinta CNTÃ-®-240 & CNTÃ-®-400, and CommScope WBCÃ-®-240 & WBCÃ-®-400 coaxial cables, RFN-1006 Series of 2-piece N Male connectors feature quick fitting, cable insertion type connector with captive internal contact and white bronze plating that provides tough non-tarnishing exterior finish. Installation...
Read More »
Kit Combines Precision 3.5mm Adapters for High Frequency Applications
The RFA-4031-01 kit features three 3.5mm precision adapters added to the RF Connector product line for use in microwave and RF applications. All 3.5mm adapters in this series have 50 ohm impedance and are made of non-magnetic, 303 stainless steel with beryllium copper contacts, supported with a bead configuration. They are designed to operate up to 34 GHz with a VSWR rating of 1.05+.006 f (f-GHz)...
Read More »DIN Adapters target infrastructure applications.
Built to CECC-22190 international specifications, 7/16 DIN adapters are designed for transmission of medium to high power signals for base station applications. They have characteristic impedance of 50 ohms and electrical performance up to 7.5 Ghz. Available in various straight and right angle configurations, adapters feature brass male and beryllium copper female contacts, machined bodies, and...
Read More »Universal Cable Tester is field-ready for any assembly.
Used to detect open and short faults in coaxial cable assemblies, RFA-4018-20 is constructed with UnidaptÃ-® universal connector system that allows for testing of any connector with attachment of adapters from UnidaptÃ-® adapter kits. LED front panel indicates pass or fail with red or green light, and tester indicates whether failure is due to short, open conductor, or open shield....
Read More »
Universal RF Adapter Kit offers white bronze plating option.
Unidapt(TM) kit is available with white bronze plating (RFA-4024-WB), which provides tarnish-free, non-magnetic solution that is also corrosion resistant and lead (Pb) free and exhibits minimal intermodulation distortion. Adapters come with gold-plated contacts and Teflon(TM) insulation. Universal center adapter, included, enables any combination of N, BNC, TNC, SMA, UHF, and M-UHF components for...
Read More »
High Frequency Test Cables come in standard and custom lengths.
MIL-DTL-17, type IX specified precision test cables feature high-grade, passivated, stainless steel SMA males with PTFE insulators and are configured for low loss and low VSWR. Electrical features include 50 W impedance, 23.8 pF/ft capacitance, 85% Vp, shielding effectiveness better than -95 dB, operating temperature range of -55 to +200Ã-
Read More »
Universal Adapter System Kit supports field/bench technicians.
Unidapt(TM) coaxial adapter system features universal adapter to join any 2 Unidapt(TM) adapters with standard coaxial interfaces. Seventy-four-piece RFA-4022 Unidapt(TM) Mega-Plus Kit helps in troubleshooting and testing 7-16 DIN, BNC, F, Mini-UHF, MCX, MMCX, N, RCA, reverse polarity SMA and TNC, SMA, SMB, TNC and UHF terminated devices. Kit contains universal tee, universal right angle adapter,...
Read More »
UHF Connectors for Heliax-® Cable
Availability of UHF connectors for LDF4-50A Ã-½ inch Andrew HeliaxÃ-® cable was limited to the secondary market when manufacturing ceased several years ago. RF Connectors division of RF Industries has released UHF male and UHF female connectors for LDF4-50A Ã-½ inch cable to fill that need. These connectors utilize the same installation process and tooling required for the...
Read More »
Variety of Bulkhead Mount SMA Connectors in Stock for OEM Applications
RF Connectors, division of RF Industries, offers a variety of SMA bulkhead mount connectors for use in OEM applications. Mounting configurations include front and rear mount with solder cup electrical terminations. Male and female SMA connector interfaces are available. Connector bodies are machined brass with nickel of Gold plating. All dielectrics are PTFE with Gold plated contacts. Part...
Read More »SMA Connectors come with male and female connector interface.
Suited for OEM applications, SMA flange mount connectors feature solder post and solder cup electrical termination. All flanges are standard .500 in. square with .102 in. dia mounting holes. Connector bodies are machined brass with nickel of gold plating, while dielectrics are TeflonÃ-® with gold plated contacts. RSA-3171 SMA jack and RSA-3231 SMA plug, have solder cups; RSA 3232-1,...
Read More »
Solderless Connectors require minimal cable preparation.
Designed to fit Times Microwave LMRÃ-®-240 & LMRÃ-®-400, Andrew Cinta CNTÃ-®-240 & CNTÃ-®-400, and CommScope WBCÃ-®-240 & WBCÃ-®-400 coaxial cables, RFN-1006 Series of 2-piece N Male connectors feature quick fitting, cable insertion type connector with captive internal contact and white bronze plating that provides tough non-tarnishing exterior finish. Installation...
Read More »
Kit Combines Precision 3.5mm Adapters for High Frequency Applications
The RFA-4031-01 kit features three 3.5mm precision adapters added to the RF Connector product line for use in microwave and RF applications. All 3.5mm adapters in this series have 50 ohm impedance and are made of non-magnetic, 303 stainless steel with beryllium copper contacts, supported with a bead configuration. They are designed to operate up to 34 GHz with a VSWR rating of 1.05+.006 f (f-GHz)...
Read More »DIN Adapters target infrastructure applications.
Built to CECC-22190 international specifications, 7/16 DIN adapters are designed for transmission of medium to high power signals for base station applications. They have characteristic impedance of 50 ohms and electrical performance up to 7.5 Ghz. Available in various straight and right angle configurations, adapters feature brass male and beryllium copper female contacts, machined bodies, and...
Read More »Universal Cable Tester is field-ready for any assembly.
Used to detect open and short faults in coaxial cable assemblies, RFA-4018-20 is constructed with UnidaptÃ-® universal connector system that allows for testing of any connector with attachment of adapters from UnidaptÃ-® adapter kits. LED front panel indicates pass or fail with red or green light, and tester indicates whether failure is due to short, open conductor, or open shield....
Read More »