Company News

Abtex Corporation

89 Main St., Dresden, NY, 14441, USA

  • 866-941-1485

General Information:
Larry Johnson
Phone: 315-536-7403
E-mail this person

Latest New Product News from
Abtex Corporation

machinery & machining tools

Deburring Kit enables in-machine burr removal integration.

October 2, 2015

Abtex In-machine Deburring Kit (Item No. 0629940) lets end-users increase operational efficiency by incorporating deburring into any CNC manufacturing center. Becoming integral part of any CNC machine, kit provides everything needed and does not require additional floorspace. Components include 4 in., V-tufted, silicon-carbide deburring brush, which can eliminate burrs from machined steel or aluminum parts, and 1 in. drive arbor with center hole for coolant feed.<br /> Read More

machinery & machining tools

Deburring Machine offers 5-second solution.

September 23, 2014

In 5 seconds or less, Turnamat thoroughly cleans burrs from end of steel, aluminum, and non-ferrous metal pipe or tube, ridding it of potential hazards to operational quality or handling safety. Machine also handles curved and square pipe and tubes along with angular pieces. At 1,300 lb, and with motor speeds of 1,500 and 3,000 rpm, Turnamat provides thousands of hours of trouble-free, 24/7 operation. Read More

machinery & machining tools

Deburring System processes fineblanked parts.

March 18, 2014

Capable of being bulk fed or fed directly by upstream press, Tri-Ten System features 3 planetary head system that removes burrs on parts ranging from 3 mm to 0.40 mm thick. Three 254 mm flap discs on first head remove primary stamping burr, while six 254 mm, application-specific abrasive filament brushes on second and third heads eliminate secondary burrs and provide specified edge radius. To ensure part cleanliness and extend media life, coolant is liberally applied during deburring operation. Read More

cleaning products & equipment, machinery & machining tools, services

Deburring System handles high volume fineblanked parts.

March 5, 2014

Capable of annual throughput of >15 million parts, Tri-Ten deburring system can be bulk fed by operator/robot or fed directly by upstream press. Vision System stops machine if parts are improperly loaded, and 3 planetary head system removes burrs on parts from 3&ndash;0.40 mm thick. While three 254 mm flap discs on first head removes primary stamping burr, six 254 mm application-specific abrasive filament brushes on subsequent 2 heads eliminate secondary burrs and provide specified edge radius. Read More

machinery & machining tools

Abrasive Brushes feature diamond filament for honing, finishing.

June 5, 2013

Available in all Abtex brush configurations, application-specific diamond filament brushes feature diamond abrasive grains impregnated into nylon fiber. Hard and aggressive abrasive filaments, combined with construction method, help extend brush life. Abrasive filament brushing tools are mounted on molded, composite cores and backing materials. Uses include honing carbide cutting tools and finishing harder metals as well as deburring and finishing glass, ceramic, and aerospace alloys. Read More

machinery & machining tools

Deburring System utilizes 2 planetary heads.

February 1, 2013

At one end of Tri-Ten U-Series system, parts are placed on magnetic conveyor that carries them through first offset planetary deburring head where three 10 in. fiber abrasive disc brushes deburr upward facing surface. Parts then pass through second planetary head before being captured by turn-over conveyor that flips parts. After both sides are deburred, they are demagnetized, and pass under rinse and air knife. System is also equipped with mist collection system and coolant filtration system. Read More

machinery & machining tools

Profile End Preparation System has compact, portable design.

November 27, 2012

Measuring 24 x 24 x 48 in., PEP system produces consistently uniform results. It completely removes burrs from aluminum extrusion profiles, regardless of work piece geometry, and lateral surface finish is not affected. Operator clamps sample part in place and manually feeds part across face of 8 in. abrasive filament brush. When part carrier makes contact with limit switch, included 2 hp, 1,750 rpm electric motor reverses direction for return feed against brush. Read More

machinery & machining tools

Deburring System features machine-compatible design.

March 19, 2012

Customized for application-specific abrasive filament brushes, Tri-Ten Series accepts precision ground parts, in carriers, directly from grinding, lapping, or honing machine. As magnetized belt grips parts in carrier, they are presented to planetary head, where three 10 in. abrasive filament brushes deburr upward facing surface. Edge break, surface finish, and material removal are accurately controlled. Brushes may be specified with silicon carbide, aluminum oxide, ceramic, or diamond filaments. Read More

cleaning products & equipment, machinery & machining tools, portable tools

Ceramic Filament Brushing Tools are suited for alloy part work.

October 18, 2011

Accommodating needs of industries working with alloy steel parts, ceramic filament brushes are mounted in molded, composite material, feature hard, durable grain that produces sharp cutting edges as it wears. Available in every brush configuration, abrasive tools are designed to be application specific. Read More

machinery & machining tools

Deburring System features return-to-operator configuration.

March 4, 2009

Suited for applications requiring small footprint and portability, Tri-Ten series planetary head deburring system is designed to deburr both sides of part in single pass. Magnetic conveyor passes parts loaded at one end of system through offset planetary deburring head, where three fiber abrasive brushes deburr upward facing surface, after which part is carried to flipping mechanism and transported back through planetary head for deburring. Read More

machinery & machining tools

Deburring System processes parts in wet environment.

November 12, 2007

Wet Tri-Ten Series Series motors and electrical components are outside of process cabinet, isolating them from wet environment. System includes planetary head with 3 brushes, bathed in spray of coolant, that deburr top surface of parts. Also included is magnetized overhead conveyor, second planetary head with brushes bathed in coolant to deburr bottom of parts, and demagnetizer. Read More

machinery & machining tools

Deburring Center utilizes planetary deburring head.

January 5, 2007

Employing three 10 in. brushes per head, Tri-Ten Series is capable of deburring both sides of flat part in one pass, without flipping it, via use of dual magnetic conveyors. Third conveyor passes parts into degausser for demagnetization. Base system design can be expanded to include application-specific auxiliary equipment. For non-ferrous parts, systems can be designed using alternate part fixturing methods. Read More

machinery & machining tools

Planetary Head System uses three 10 in. brushes.

November 16, 2005

Optimizing brushing action in through-feed applications, Planetary Head System offers 207 sq in. of total abrasive surface area. Independent variable-speed drives allow for job-to-job fine tuning of rotary head to individual brush speed ratio by one system operator. For brush changing, operator turns horizontally located set screw to release or capture brush via knob-headed retaining pin, eliminating need for spindle lock. Read More

machinery & machining tools

Deburring System deburrs short parts in one pass.

March 20, 2003

Bradex® semi-automatic, double head, flow-through system simultaneously deburrs both ends of short extrusions, measuring from 1-3 in. in length. Each of four 12 or 14 in. disc brushes is driven by 3 hp motor, which are mounted on tool slides for precise alignment of brushes to ends of parts. Variable speed, manually-fed conveyor system allows for deburring rates up to 1,200 parts/hr. Read More

cleaning products & equipment

Nylon Brushes suit light finishing applications.

November 18, 2002

Bradex® brushes have nylon-only bristles for applications requiring less aggressive characteristics. Nylon filaments are molded into composite backing, which can be rigid or flexible as needed for application. Trim length, fill density, and filament sizes are controllable variables. Brushes are produced in black or clear, but may be custom ordered in range of colors. Read More

machinery & machining tools

Deburring System features multi-directional wiping action.

December 11, 2001

Semi-automatic double head flow-through deburring system can accommodate workpieces from 3 to 60 in. long. Three horsepower motors drive each of four 12 or 14 in. disc brushes. Brush motors are mounted on tool slides, while 2 counter rotating brushes per side provide 360° deburring action to both ends of extrusion simultaneously. Variable speed conveyor system allows for deburring rates up to 1,200 parts per hour. Read More

machinery & machining tools, portable tools

Brushes feature high filament density.

November 30, 2001

Bradex® Composite hub fiber abrasive radial wheel brushes have embedded fibers across entire surface of their indestructable cores. This reduces filament breakage and allows filaments to perform consistently throughout wear process. Wheels are well balanced to aid in reducing machine fatigue. Read More

Other Company News from
Abtex Corporation