TAH Industries, Inc.
Robbinsville, NJ 08691 1603
Share:
Disposable Air Assisted Spray applies 2-component coatings.
Targeted for low pressure spray applications, disposable plastic spray manifold can be used with conventional meter/mix equipment. Reactive coating is mixed within static mixer, then at mixer outlet, air is introduced which atomizes liquid stream. Effective for high viscosity liquids and abrasive suspensions, reactive coating is contained completely within disposable static mixer, minimizing...
Read More »Mixer offers option for securing cartridge to unit.
Available in 3 designs, 11.2 mm TURBO(TM) square-geometry mixer is designed with molded barbed outlet for use of tube extensions. Optional double-looped plastic hanger fits over neck of cartridges for secure connection to mixer, and hanger bracket snaps onto unique ribs on 11.2 mm nozzle body. Mixer, designed for use with Pro-Tip(TM) Accessories, also features integral nut to facilitate...
Read More »Disposable Static Mixer handles adhesives and sealants.
High Flow Turbo(TM) Mixer features square geometry, consisting of series of alternating left and right hand elements with intermittent flow inverters, which channel fluids from wall into center of mixer. It is available in 2 thread configurations with snap off extensions.
Read More »Cartridge suits 2-component adhesives, epoxies, sealants.
Universal 2-component adhesive cartridge fits in standard caulk gun and is offered in 2:1 ratio pack. Cartridge stores one component of adhesive in front of the other and both are extruded through cartridge outlet into static mixer simultaneously. Unit maintains accurate volumetric ratio and eliminates bulging or expansion of cartridge. The 2:1 ratio contains 177 ml of usable material.
Read More »Dispensing Cartridges feature unibody design.
Two-component, closed-end cartridges feature multi-seal pistons with pre-staged bleed plugs, and wide shelf at back end for option of applying foil seal. Hermetically-sealed outlet breaks off cleanly, while re-sealable cap offers identification marks to prevent cross-contamination. Sizes include 50, 200, 400, and 600 ml.
Read More »Flange suits static mixer applications.
Multi-Bolt Flange(TM) suits company's T-Series line of static mixers. Flange connects to standard ANSI 150 in. pattern as well as PN10 and PN16 Table D and E patterns, to facilitate smoother installation in metric systems. It is available in 2-8 in. diameters in PVC and CPVC materials.
Read More »Disposable Mixers allow operator to be close to workpiece.
Series 180A Turbo Plastic Bell Nozzle Static Mixers feature square geometry consisting of series of alternating left and right hand elements with intermittent flow inverters, which channel fluids from walls into center of mixer. Outlet end accepts Pro Tip(TM) accessories. Mixers are available in 18, 24, and 36 element configurations and also with integral nut design.
Read More »Adhesive Cartridge offers 2:1 ratio.
Universal Two-Component Adhesive Cartridge fits into standard caulking gun. Unit stores one component in front of the other, but both are extruded through outlet and into static mixer simultaneously. One to one ratio contains 250 mL, while 2:1 ratio holds 177 mL. Cartridge is suited for most 2-component adhesives, epoxies, sealants, and foams.
Read More »TAH Industries - New Associate at TAH Europe
Colin Loader joins TAH Europe on 2nd January as the European Business Manager Packaging Accounts, based in Rushden, UK. TAH Europe welcomes the experience that Colin will bring to our business: Ã-· During the past 7 years, Colin has worked for one of the worlds leading chemical companies and was responsible for successfully growing Adhesive distribution sales in UK and Ireland, Northern...
Read More »Quality Manufacturing at TAH Industries to ISO 9001:2000 Standards
Robbinsville, NJ - TAH Industries, Inc., a leading manufacturer of motionless mixer systems for 2-component adhesive applications and in-line chemical and water treatment processes, is proud to be an ISO 9001:2000 registered company. The registration is valid through 30 June, 2008 and was awarded by TÃ
Read More »TAH Appoints Cartridge Distributor in Japan
TAH Industries, Inc. today announced they have signed a Strategic Distribution Agreement with Nomura Jimusho, Inc. TAH Inc. is a US manufacturer of static mixer & packaging solutions for the adhesive & sealant industry. Nomura Jimusho, Inc. is a Japanese distributor of a variety of raw materials for the chemical, polymer, rubber & catalysts industries. Meghann Horner, TAH's Asia Sales Manager,...
Read More »Disposable Air Assisted Spray applies 2-component coatings.
Targeted for low pressure spray applications, disposable plastic spray manifold can be used with conventional meter/mix equipment. Reactive coating is mixed within static mixer, then at mixer outlet, air is introduced which atomizes liquid stream. Effective for high viscosity liquids and abrasive suspensions, reactive coating is contained completely within disposable static mixer, minimizing...
Read More »Mixer offers option for securing cartridge to unit.
Available in 3 designs, 11.2 mm TURBO(TM) square-geometry mixer is designed with molded barbed outlet for use of tube extensions. Optional double-looped plastic hanger fits over neck of cartridges for secure connection to mixer, and hanger bracket snaps onto unique ribs on 11.2 mm nozzle body. Mixer, designed for use with Pro-Tip(TM) Accessories, also features integral nut to facilitate...
Read More »Disposable Static Mixer handles adhesives and sealants.
High Flow Turbo(TM) Mixer features square geometry, consisting of series of alternating left and right hand elements with intermittent flow inverters, which channel fluids from wall into center of mixer. It is available in 2 thread configurations with snap off extensions.
Read More »Cartridge suits 2-component adhesives, epoxies, sealants.
Universal 2-component adhesive cartridge fits in standard caulk gun and is offered in 2:1 ratio pack. Cartridge stores one component of adhesive in front of the other and both are extruded through cartridge outlet into static mixer simultaneously. Unit maintains accurate volumetric ratio and eliminates bulging or expansion of cartridge. The 2:1 ratio contains 177 ml of usable material.
Read More »Dispensing Cartridges feature unibody design.
Two-component, closed-end cartridges feature multi-seal pistons with pre-staged bleed plugs, and wide shelf at back end for option of applying foil seal. Hermetically-sealed outlet breaks off cleanly, while re-sealable cap offers identification marks to prevent cross-contamination. Sizes include 50, 200, 400, and 600 ml.
Read More »Flange suits static mixer applications.
Multi-Bolt Flange(TM) suits company's T-Series line of static mixers. Flange connects to standard ANSI 150 in. pattern as well as PN10 and PN16 Table D and E patterns, to facilitate smoother installation in metric systems. It is available in 2-8 in. diameters in PVC and CPVC materials.
Read More »Disposable Mixers allow operator to be close to workpiece.
Series 180A Turbo Plastic Bell Nozzle Static Mixers feature square geometry consisting of series of alternating left and right hand elements with intermittent flow inverters, which channel fluids from walls into center of mixer. Outlet end accepts Pro Tip(TM) accessories. Mixers are available in 18, 24, and 36 element configurations and also with integral nut design.
Read More »