IOtech, Inc.
Bedford Heights, OH 44146-1833
Share:
DAQ Modules incorporate interactive measurement software.
Offered as out-of-the-box system, 6000 Series combines Ethernet-based DAQ modules with Encore software. Model 6220 is 12-channel, 16-bit voltage input module with 100 kHz per channel sample rate and additional BNC connectors. Model 6224 is 12-channel, strain gage input module offering 24-bit resolution, with 50 kHz per A/D per channel. It is 100% software programmable, facilitating strain set-up...
Read More »Dynamic Signal Analyzer measures both temperature/vibration.
With both temperature and voltage input channels, USB-based 655u dynamic signal analyzer suits vibration analysis and monitoring applications. Unit offers Ã-
Read More »Dynamic Signal Analyzer has temperature and voltage inputs.
Along with 10 voltage or direct integrated electronic piezoelectric (IEPE) input channels, USB-based 655u offers 5 input channels for direct temperature measurements, which can be critical to vibration analysis and monitoring. Delta-sigma, 24-bit ADCs per channel optimize resolution as well as AC and DC accuracy. Unit offers Ã-
Read More »USB DAQ Boards target OEMs and embedded applications.
Providing multifunction performance, 1 MHz/16-bit DaqBoard/3000USB(TM) Series includes analog inputs, waveform-capable analog outputs, 24 high-speed digital I/O, 4 counter inputs, and 2 timer outputs. Low-latency control output mode enables any input to control output, based on pre-defined limits. Trigger modes range from analog trigger with 1 Ã-µs max latency, to multi-channel triggering,...
Read More »
Boards provide PCI data acquisition.
DaqBoard/3000(TM) Series consists of 4 boards equipped with custom data acquistion engine capable of making analog measurements at 1 Ã-µs/channel, and concurrently reading digital and counter inputs, while generating up to four 1 MHz/16-bit analog waveform outputs plus digital pattern generation. Boards include 8 differential or 16 single-ended analog inputs, 24 high-speed digital I/O lines,...
Read More »
Multifunction Module enables isolated signal conditioning.
Using 8B isolated signal conditioning modules, DBK48(TM) provides up to 16 channels of I/O with 250 V isolation from channel-to-channel. Up to 16 modules can attach to one P1 expansion port on IOtech DAQ products. All signal connections are accomplished via removable screw-terminal connectors on front panel. Product incorporates cold junction compensation and dc/dc converter. Modules are...
Read More »
Portable DAQ Module measures volts and thermocouples.
USB-based Personal Daq/54(TM) offers 10 single-ended or 5 differential voltage or thermocouple input channels. It provides 500 V isolation between analog inputs and USB port and PC. Unit includes 16 programmable voltage ranges, 22-bit A/D converter, and 20 V maximum input range, making it suited for in-vehicle measurement applications with 12 V power systems. Module is supplied with Personal...
Read More »
Multifunction PCI DAQ Boards feature 16-bit resolution.
DaqBoard/500(TM) series includes 2 models, each with 200 kHz ADC, one counter input, 2 timer outputs, and DMA bus mastering. DaqBoard/505(TM) offers 16 channels of 16-bit analog inputs, 24 digital I/O lines, and one counter input, while DaqBoard/500(TM) also provides two 16-bit analog outputs with 100-kHz waveform capability. Featuring 100% digital calibration, up to 4 DaqBoards per PC result in...
Read More »
Laboratory DAQ Instruments are Ethernet-based.
Suited for bench-top data acquisition applications, DaqLab/2000(TM) Series is capable of expansion to hundreds of channels. It incorporates 16-bit ADC coupled with Ethernet engine as well as front-panel signal I/O. Expansion channels can be added via DBK boards, and unit offers 16K location scan sequencer. All built-in and expansion channels are scanned up to 200 kHz. Unit includes DaqView(TM)...
Read More »
Signal Conditioning Modules suit DAQ applications.
Model DBK55 frequency-input module provides 8 channels of frequency measurement capability. Up to 32 modules can be connected to one DAQ system for total of 256 channels. Model DBK65 offers 8 channels of transducer interface capability, allowing connection of 2-, 3-, 4-, and 6-wire transducers. Each channel can be set for different excitation voltage. Model DBK85 provides 16 channels of...
Read More »DAQ Modules incorporate interactive measurement software.
Offered as out-of-the-box system, 6000 Series combines Ethernet-based DAQ modules with Encore software. Model 6220 is 12-channel, 16-bit voltage input module with 100 kHz per channel sample rate and additional BNC connectors. Model 6224 is 12-channel, strain gage input module offering 24-bit resolution, with 50 kHz per A/D per channel. It is 100% software programmable, facilitating strain set-up...
Read More »Dynamic Signal Analyzer measures both temperature/vibration.
With both temperature and voltage input channels, USB-based 655u dynamic signal analyzer suits vibration analysis and monitoring applications. Unit offers Ã-
Read More »Dynamic Signal Analyzer has temperature and voltage inputs.
Along with 10 voltage or direct integrated electronic piezoelectric (IEPE) input channels, USB-based 655u offers 5 input channels for direct temperature measurements, which can be critical to vibration analysis and monitoring. Delta-sigma, 24-bit ADCs per channel optimize resolution as well as AC and DC accuracy. Unit offers Ã-
Read More »USB DAQ Boards target OEMs and embedded applications.
Providing multifunction performance, 1 MHz/16-bit DaqBoard/3000USB(TM) Series includes analog inputs, waveform-capable analog outputs, 24 high-speed digital I/O, 4 counter inputs, and 2 timer outputs. Low-latency control output mode enables any input to control output, based on pre-defined limits. Trigger modes range from analog trigger with 1 Ã-µs max latency, to multi-channel triggering,...
Read More »
Boards provide PCI data acquisition.
DaqBoard/3000(TM) Series consists of 4 boards equipped with custom data acquistion engine capable of making analog measurements at 1 Ã-µs/channel, and concurrently reading digital and counter inputs, while generating up to four 1 MHz/16-bit analog waveform outputs plus digital pattern generation. Boards include 8 differential or 16 single-ended analog inputs, 24 high-speed digital I/O lines,...
Read More »
Multifunction Module enables isolated signal conditioning.
Using 8B isolated signal conditioning modules, DBK48(TM) provides up to 16 channels of I/O with 250 V isolation from channel-to-channel. Up to 16 modules can attach to one P1 expansion port on IOtech DAQ products. All signal connections are accomplished via removable screw-terminal connectors on front panel. Product incorporates cold junction compensation and dc/dc converter. Modules are...
Read More »
Portable DAQ Module measures volts and thermocouples.
USB-based Personal Daq/54(TM) offers 10 single-ended or 5 differential voltage or thermocouple input channels. It provides 500 V isolation between analog inputs and USB port and PC. Unit includes 16 programmable voltage ranges, 22-bit A/D converter, and 20 V maximum input range, making it suited for in-vehicle measurement applications with 12 V power systems. Module is supplied with Personal...
Read More »
Multifunction PCI DAQ Boards feature 16-bit resolution.
DaqBoard/500(TM) series includes 2 models, each with 200 kHz ADC, one counter input, 2 timer outputs, and DMA bus mastering. DaqBoard/505(TM) offers 16 channels of 16-bit analog inputs, 24 digital I/O lines, and one counter input, while DaqBoard/500(TM) also provides two 16-bit analog outputs with 100-kHz waveform capability. Featuring 100% digital calibration, up to 4 DaqBoards per PC result in...
Read More »
Laboratory DAQ Instruments are Ethernet-based.
Suited for bench-top data acquisition applications, DaqLab/2000(TM) Series is capable of expansion to hundreds of channels. It incorporates 16-bit ADC coupled with Ethernet engine as well as front-panel signal I/O. Expansion channels can be added via DBK boards, and unit offers 16K location scan sequencer. All built-in and expansion channels are scanned up to 200 kHz. Unit includes DaqView(TM)...
Read More »
Signal Conditioning Modules suit DAQ applications.
Model DBK55 frequency-input module provides 8 channels of frequency measurement capability. Up to 32 modules can be connected to one DAQ system for total of 256 channels. Model DBK65 offers 8 channels of transducer interface capability, allowing connection of 2-, 3-, 4-, and 6-wire transducers. Each channel can be set for different excitation voltage. Model DBK85 provides 16 channels of...
Read More »