Ics Electronics
Pleasanton, CA 94588
Share:
Interface Board controls RS-232 and RS-485 Modbus RTU devices.
With Model 9009, temperature chambers and other Modbus controlled slave devices can be controlled from Ethernet, GPIB, or USB source or test system. Board's Ethernet port supports VXI-11 and raw socket protocol, Modbus TCP/IP conversion, and internal HTML web server. Modbus TCP/IP packets are directly converted into Modbus RTU packets. With Control Page, WebServer lets user enter commands from...
Read More »
Interface Board controls digital devices over network.
Offering Ethernet to Digital interface, Model 8003 provides 40 parallel I/O lines that can be configured as inputs or outputs in 8-bit bytes. User can control I/O lines from any computer with NIC or from TCP/IP network. Handshake lines are provided for synchronizing data transfers from external devices or for latching data into external devices. Board can also monitor 15 input lines and generate...
Read More »Ethernet-to-Relay Interface is VXI-11.3 compliant.
Designed for switching signals and controlling external devices over company network or Internet, Model 8064 Ethernet-to-Relay Interface adds 16 relay contacts/16 relay drivers, and isolated digital inputs to Ethernet based test system. User has choice of low-level contacts for switching A/D signals or heavy-duty contacts for switching loads up to 1 A. Relay driver option provides 16 outputs for...
Read More »
Ethernet-to-Digital Interface Board provides 48 digital I/O.
Designed to control digital devices over company network or Internet, Model 8063 Ethernet-to-Parallel Interface offers 48 parallel I/O lines that can be configured as inputs or outputs in 8-bit bytes. Unit can monitor 15 input lines and generate VXI-11 Service Request messages when enabled line changes state. Handshake lines are provided for synchronizing data transfers or for latching data into...
Read More »
Ethernet to GPIB Controller is fully VXI-11 compliant.
Suited for controlling GPIB Instruments and devices over Internet or company network, Model 8065 provides access from any computer with NIC or TCP/IP interface. Server is compliant with VXI-11.2 and VXI-11.3, providing user with full control of GPIB bus and ability to perform IEEE-488.2 Controller protocols. RoHS-compliant unit, able to handle up to 15 VXI-11 links to support multiple clients,...
Read More »Software controls GPIB instruments over network.
GPIB AnyWhere(TM) software bus extension provides network access to GPIB Controller and to all instruments connected to it by adding VSI-11 Service to PC controller is connected to. Applications include debugging test programs on production hardware from desktop, accessing equipment at remote test sites, sharing instruments on 24/7 basis from anywhere, and providing GPIB gateway for...
Read More »
Smart Interface adapts serial devices to GPIB Bus.
Model 4866 makes Smart GPIB to Serial firmware from 4806 OEM Interface Card available in stand-alone box for benchtop use. Unit provides true IEEE-488.2-compatible GPIB interface for serial device by intercepting and responding to all IEEE-488.2 commands. Unit also responds to 4 SCPI root words for controlling its setup. Responses from serial device are outputted on GPIB bus when 4866 is...
Read More »
Bus Extender extends GPIB bus beyond 20 m limit.
Model 4897 works with fiber-optic and metallic cables. It provides bus extension distances greater than 5,000 m and expands number of devices beyond specification limit of 14. Unit is IEEE-488.2 compliant and does not generate false replies to 488.2 FindListener protocol. Normal mode simultaneously handshakes GPIB bytes on both buses at rates greater than 80 kbytes/sec. Buffered mode transfers...
Read More »
GPIB Bus Isolator eliminates ground loops and noise.
Model 4860A isolates instruments from bus controller and does not generate false replies to 488.2 FindListener Protocol used by LabView(TM) and VEE(TM). Use of optical isolators and separate power supplies achieve 2,000 Vdc isolation between main bus and isolated bus. Optical isolators also provide 5,000 V/-µsec noise and 50 V common mode isolation between buses. Smart logic recognizes which bus...
Read More »
Interface Module provides 2 high-speed serial channels.
Model VXI-5562 single-slot wide, C-size module transmits and receives binary data, and fits in majority of VXI test systems. Each channel has 2 Mbyte buffers and provides programmable data, clock and data gate or enable signals with user selected RS-422 or LVDS transceivers. Internal frequency synthesizer generates clock rates up to 10 Mbits/sec. Data can be received continuously or module can be...
Read More »
Interface Board controls RS-232 and RS-485 Modbus RTU devices.
With Model 9009, temperature chambers and other Modbus controlled slave devices can be controlled from Ethernet, GPIB, or USB source or test system. Board's Ethernet port supports VXI-11 and raw socket protocol, Modbus TCP/IP conversion, and internal HTML web server. Modbus TCP/IP packets are directly converted into Modbus RTU packets. With Control Page, WebServer lets user enter commands from...
Read More »
Interface Board controls digital devices over network.
Offering Ethernet to Digital interface, Model 8003 provides 40 parallel I/O lines that can be configured as inputs or outputs in 8-bit bytes. User can control I/O lines from any computer with NIC or from TCP/IP network. Handshake lines are provided for synchronizing data transfers from external devices or for latching data into external devices. Board can also monitor 15 input lines and generate...
Read More »Ethernet-to-Relay Interface is VXI-11.3 compliant.
Designed for switching signals and controlling external devices over company network or Internet, Model 8064 Ethernet-to-Relay Interface adds 16 relay contacts/16 relay drivers, and isolated digital inputs to Ethernet based test system. User has choice of low-level contacts for switching A/D signals or heavy-duty contacts for switching loads up to 1 A. Relay driver option provides 16 outputs for...
Read More »
Ethernet-to-Digital Interface Board provides 48 digital I/O.
Designed to control digital devices over company network or Internet, Model 8063 Ethernet-to-Parallel Interface offers 48 parallel I/O lines that can be configured as inputs or outputs in 8-bit bytes. Unit can monitor 15 input lines and generate VXI-11 Service Request messages when enabled line changes state. Handshake lines are provided for synchronizing data transfers or for latching data into...
Read More »
Ethernet to GPIB Controller is fully VXI-11 compliant.
Suited for controlling GPIB Instruments and devices over Internet or company network, Model 8065 provides access from any computer with NIC or TCP/IP interface. Server is compliant with VXI-11.2 and VXI-11.3, providing user with full control of GPIB bus and ability to perform IEEE-488.2 Controller protocols. RoHS-compliant unit, able to handle up to 15 VXI-11 links to support multiple clients,...
Read More »Software controls GPIB instruments over network.
GPIB AnyWhere(TM) software bus extension provides network access to GPIB Controller and to all instruments connected to it by adding VSI-11 Service to PC controller is connected to. Applications include debugging test programs on production hardware from desktop, accessing equipment at remote test sites, sharing instruments on 24/7 basis from anywhere, and providing GPIB gateway for...
Read More »
Smart Interface adapts serial devices to GPIB Bus.
Model 4866 makes Smart GPIB to Serial firmware from 4806 OEM Interface Card available in stand-alone box for benchtop use. Unit provides true IEEE-488.2-compatible GPIB interface for serial device by intercepting and responding to all IEEE-488.2 commands. Unit also responds to 4 SCPI root words for controlling its setup. Responses from serial device are outputted on GPIB bus when 4866 is...
Read More »
Bus Extender extends GPIB bus beyond 20 m limit.
Model 4897 works with fiber-optic and metallic cables. It provides bus extension distances greater than 5,000 m and expands number of devices beyond specification limit of 14. Unit is IEEE-488.2 compliant and does not generate false replies to 488.2 FindListener protocol. Normal mode simultaneously handshakes GPIB bytes on both buses at rates greater than 80 kbytes/sec. Buffered mode transfers...
Read More »
GPIB Bus Isolator eliminates ground loops and noise.
Model 4860A isolates instruments from bus controller and does not generate false replies to 488.2 FindListener Protocol used by LabView(TM) and VEE(TM). Use of optical isolators and separate power supplies achieve 2,000 Vdc isolation between main bus and isolated bus. Optical isolators also provide 5,000 V/-µsec noise and 50 V common mode isolation between buses. Smart logic recognizes which bus...
Read More »
Interface Module provides 2 high-speed serial channels.
Model VXI-5562 single-slot wide, C-size module transmits and receives binary data, and fits in majority of VXI test systems. Each channel has 2 Mbyte buffers and provides programmable data, clock and data gate or enable signals with user selected RS-422 or LVDS transceivers. Internal frequency synthesizer generates clock rates up to 10 Mbits/sec. Data can be received continuously or module can be...
Read More »