Simonds International
P.O. Box 600
Fitchburg, MA 01420
Share:
Bandsaw Blades cut wide range of material.
Designed to minimize blade changeovers, BroadBandÃ-® A8 Bi-Metal Bandsaw Blades can cut materials ranging from wood and lightweight aluminum to stainless steel in multitude of shapes. Balanced tooth spacing design combined with raker tooth delivers consistent wear across blade over time. Available in blade widths of Ã-¾, 1, and 1Ã-¼ in., BroadBand A8 Bandsaw Blades come in variety of...
Read More »
Magnetic Lifting Frames work in the air or on the ground.
Available in overhead crane or portable forklift version, STRONG-MAG Lifting Frames move metal sheets around plant securely and safely. Units handle sheets in widths of 4, 5, or 6 ft and lengths from 8-12 ft. Permanent magnet frames can be used with flat steel and diamond plate steel in thicknesses from 25 gauge to 3/8 in. Delivering 3:1 safety ratio, units offer manually switched, hydraulic...
Read More »
Magnetic Lifters handle both thick and thin metal sheets.
Able to lift thin gauge metals down to minimum of .310 in., STRONG-MAG DLS Series Lifter Model DLS 330 has lifting capacity of 331 lb while DLS 660 lifts up to 661 lb. Multiple magnets can used to safely lift up to 1,322 lb with spreader beam. Requiring no energy source, lifters attach to crane hook, which is then lowered onto sheets to be moved. With 3:1 safety ratio, DLS Series complies with...
Read More »
Magnetic Drill Stand works with annular cutters to cut steel.
Designed to accept any Ã-¾ in. shank cutter with one or more flats, Auto-Feed Model S50AF utilizes cutters up to 2 in. Operating at no-load speeds of 350-650 rpm, controlled feed and speed system automatically adjusts speed of advance of hole cutter into workpiece, while slow start feature minimizes entry shock damage. Dual coil magnetic base with 1,585 lb of clamping force ensures stability....
Read More »
Reciprocating Saw Blades offer shatter resistance.
Suited for pneumatic power tools, Max Cut(TM) Air Saw Bi-Metal Blades measure Ã-½ x .025 x 3 5/8 in. with variety of tooth configurations including 18, 24, 32, and 10/14. They are designed with M42 edge for wear resistance and feature precision milled teeth for aggressive, yet straight and clean cuts. Blades are suited for auto body shops, boat builders, and manufacturers working in sheet...
Read More »
Hole Saws offer cutting depth of 1 9/16 in.
Able to cut tough materials, Carbide Tipped Hole Saws are constructed with tungsten carbide tooth tips and precision ground teeth. They are available in 3 tooth-per-inch configuration and in various saw diameters ranging from 9/16-6 in. Hole saw kit composed of most popular specifications used by specific contractor trades is also available.
Read More »
Welder's Kit includes 5 metal removal files.
Welder's File Kit comes with 14 in. pipeliner, 12 in. half round bastard, 10 in. mill smooth, spot weld, and Mig weld files designed to facilitate removal of tough materials and welds and provide smooth surface finishes. Kit also comes with carbon and stainless steel brushes to keep file teeth clean of debris and maximize material removal performance.
Read More »
Hole Cutters deliver accurate cuts in structural steel.
Designed to cut holes through engineering and structural steels, Simonds Hole Cutters are broaching cutters constructed of M2 steel. They deliver burr-free holes in single operation without having to drill pilot holes or perform step drilling. Products are available in long or short reach in sizes from 7/16-2 in. and metric sizes from 12-51 mm. Tungsten carbide models come in long and short reach...
Read More »
Magnets suit heavy-duty manufacturing applications.
STRONG-MAG(TM) Magnetic Products eliminate manual clamping and perform tasks such as jigging, positioning, work holding, lifting, moving, and gripping. Permanent magnets are available in button, cylindrical, flat, round, rectangular, and horseshoe shapes in various sizes. Materials range from ceramic and alnico to neodymium iron boron and samarium cobalt. Tools include permanent magnet chucks,...
Read More »
Bandsaw Blades cut through tough materials.
Heat-treated BlockBusterÃ-® M42 Blades feature fatigue-resistant backer. Variable-pitch tooth configurations include 1.1-1.4, 1.5-1.9, 2-3, 3-4, 4-6, and 5-8 teeth per inch. Widths range from 1 Ã-½ to 3 1/8 in. and thickness range from .050-.062 in. Blades can cut through variety of steel including carbon, chrome, tool, die, and stainless, as well as titanium and other alloys and are...
Read More »Simonds-® Launches Web-Based Employee Training & Certification Program
The new online training program, developed for saw operators and supervisors, offers expert instruction on bandsaw usage, productivity, waste reduction, and more Fitchburg, Mass - August 20, 2010 - Simonds International, a manufacturer of cutting tools and products for the industrial marketplace, announces its new Web-based training program developed for bandsaw machine operators and supervisors....
Read More »Florence Management Team to Buy Simonds International Facility
Florence, SC, July 3, 2006 - The Simonds International industrial knife and saw manufacturing plant located at 1435 North Cashua that had been scheduled for closure later this year will remain open and operating in Florence thanks to a group of executive employees who have reached an agreement with Simonds International to purchase the Industrial Products manufacturing facility and the associated...
Read More »
Bandsaw Blades cut wide range of material.
Designed to minimize blade changeovers, BroadBandÃ-® A8 Bi-Metal Bandsaw Blades can cut materials ranging from wood and lightweight aluminum to stainless steel in multitude of shapes. Balanced tooth spacing design combined with raker tooth delivers consistent wear across blade over time. Available in blade widths of Ã-¾, 1, and 1Ã-¼ in., BroadBand A8 Bandsaw Blades come in variety of...
Read More »
Magnetic Lifting Frames work in the air or on the ground.
Available in overhead crane or portable forklift version, STRONG-MAG Lifting Frames move metal sheets around plant securely and safely. Units handle sheets in widths of 4, 5, or 6 ft and lengths from 8-12 ft. Permanent magnet frames can be used with flat steel and diamond plate steel in thicknesses from 25 gauge to 3/8 in. Delivering 3:1 safety ratio, units offer manually switched, hydraulic...
Read More »
Magnetic Lifters handle both thick and thin metal sheets.
Able to lift thin gauge metals down to minimum of .310 in., STRONG-MAG DLS Series Lifter Model DLS 330 has lifting capacity of 331 lb while DLS 660 lifts up to 661 lb. Multiple magnets can used to safely lift up to 1,322 lb with spreader beam. Requiring no energy source, lifters attach to crane hook, which is then lowered onto sheets to be moved. With 3:1 safety ratio, DLS Series complies with...
Read More »
Magnetic Drill Stand works with annular cutters to cut steel.
Designed to accept any Ã-¾ in. shank cutter with one or more flats, Auto-Feed Model S50AF utilizes cutters up to 2 in. Operating at no-load speeds of 350-650 rpm, controlled feed and speed system automatically adjusts speed of advance of hole cutter into workpiece, while slow start feature minimizes entry shock damage. Dual coil magnetic base with 1,585 lb of clamping force ensures stability....
Read More »
Reciprocating Saw Blades offer shatter resistance.
Suited for pneumatic power tools, Max Cut(TM) Air Saw Bi-Metal Blades measure Ã-½ x .025 x 3 5/8 in. with variety of tooth configurations including 18, 24, 32, and 10/14. They are designed with M42 edge for wear resistance and feature precision milled teeth for aggressive, yet straight and clean cuts. Blades are suited for auto body shops, boat builders, and manufacturers working in sheet...
Read More »
Hole Saws offer cutting depth of 1 9/16 in.
Able to cut tough materials, Carbide Tipped Hole Saws are constructed with tungsten carbide tooth tips and precision ground teeth. They are available in 3 tooth-per-inch configuration and in various saw diameters ranging from 9/16-6 in. Hole saw kit composed of most popular specifications used by specific contractor trades is also available.
Read More »
Welder's Kit includes 5 metal removal files.
Welder's File Kit comes with 14 in. pipeliner, 12 in. half round bastard, 10 in. mill smooth, spot weld, and Mig weld files designed to facilitate removal of tough materials and welds and provide smooth surface finishes. Kit also comes with carbon and stainless steel brushes to keep file teeth clean of debris and maximize material removal performance.
Read More »
Hole Cutters deliver accurate cuts in structural steel.
Designed to cut holes through engineering and structural steels, Simonds Hole Cutters are broaching cutters constructed of M2 steel. They deliver burr-free holes in single operation without having to drill pilot holes or perform step drilling. Products are available in long or short reach in sizes from 7/16-2 in. and metric sizes from 12-51 mm. Tungsten carbide models come in long and short reach...
Read More »