Company News

BIG KAISER Precision Tooling, Inc.

2600 Huntington Blvd., Hoffman Estates, IL, 60192, USA

  • 888-866-5776

Latest New Product News from
BIG KAISER Precision Tooling, Inc.

Machinery & Machining Tools

Boring Heads minimize effect of high frequency oscillations.

March 6, 2017

Available in EWN, EWD and SW models with diameter sizes ranging in 1.614-5.906 in., Boring heads come with CKB modular connection. SW rough boring heads are used for making holes of diameters ranging in 1.614-4.331 in. and deliver 660 SFM cutting speed. Featuring .0005 in. diameter setting accuracy, EWN and EWD finish boring heads meets IP69K sealing standards. Boring heads uses smart damper... Read More

HVAC, Machinery & Machining Tools, Optics & Photonics

Smart Damper Boring Bar features three modular insert holders.

January 6, 2017

Capable of supplying coolant through body directly to cutting edge, Smart Damper Boring Bar is optimized for right-hand I.D. turning with ISO standard inserts at minimum diameter of 1.58 in. Absorbing vibration, device eliminates chattering to achieve machine accuracy. Available in 32 and 40 mm diameter, unit increases metal removal rates.

Read More

Machinery & Machining Tools

Hi-Power Milling Chuck features coolant pressure of 70 bar.

December 7, 2016

Slim HM chuck with peripheral coolant supply is designed for heavy cutting and milling applications. With nut diameter of 1.260 in. (32mm), unit exhibits runout accuracy of ten microns at 4xD. Offering CAT and BT interfaces chuck unit features 32mm straight shank design. Including 12mm cutters, 500” HMCJ accepts 3/8 in. and ¼ in. shanks and 12mm HMCJ accepts 10mm, 8mm and 6mm shanks. Device... Read More

Labels Tags Signage & Equipment, Machinery & Machining Tools, Portable Tools

Micro Engraving Tools promote burr-free surface finishes.

May 31, 2016

Featuring sharp, positive cutting geometry, Sphinx Micro Engraving Tools come standard with 3 mm diameter shank. Solid carbide tools are available in variety angles, including 30, 40, 50, 60, and 90° with flat or radius tipped geometries. Radius cutters range from .0016–.0039 in. and flats range from .0008–.0059 in. Engravers are suitable for work in most materials ranging from alloyed and... Read More

Machinery & Machining Tools, Material Handling & Storage

Face Grooving Tools operate as single or twin cutters.

May 4, 2016

Designed to fit large diameter Series 318 and Series 319 SW twin-cutter boring heads, Face Grooving Insert Holders can be used as single or twin cutter grooving tools for 2.087–118 in. diameters. Design allows for grooving depth up to .472 in., with minimum width of .079 in. and maximum of .375 in. Using boring tools as twin cutters, with simultaneous adjustment in radius and length, allows... Read More

Machinery & Machining Tools

Milling Chuck eliminates pullout during heavy-duty milling.

March 18, 2016

As heavy-duty milling chuck with fully concentric clamping, BIG Daishowa Mega Perfect Grip eliminates concerns about end mill pullout under heavy torque loads when used with heat resistant super alloys (HRSAs). System, based around milling cutters with standard Weldon flat (ASME B94.19-1997), does not require special grinding or threading of milling cutter. Three key grip grooves in chuck body... Read More

Machinery & Machining Tools

Vibration Dampening Boring Heads promote productivity, precision.

February 26, 2016

Precision boring heads, EWN and EWD Smart Damper, eliminate vibration in deep-hole finish boring. Distance from damping mechanism to cutting edge (vibration source) produces damping effects to tool assembly to minimize chatter/vibration and thereby promote surface finish quality as well as metal removal rates. While EWN heads feature dial with Ø.0005 in./div setting accuracy (.0001... Read More

Machinery & Machining Tools

Air Power Spindle rotates up to 120,000 rpm.

January 20, 2016

With air-driven Model RBX12, existing machines can be upgraded to perform high-speed micro-machining in normal machining center. Spindle achieves variable rotational speed of 100,000–120,000 rpm, optimizing accuracy and surface finish. Ceramic ball bearings and AA-grade Mega Micro Collet guarantee 1 micron runout at collet nose, while .004 in. collapsibility assures near-perfect concentric... Read More

Controls & Controllers, Machinery & Machining Tools

Benchtop Tool Presetter features full CNC capability.

October 29, 2015

For operator-independent measuring results, Speroni MAGIS offers fast movement and repeatable positioning of X and Z axes and spindle, delivering full CNC measuring with uncertainty of 2 linear axes of ±1 µm. System has standard X axis range of -2.00 to +14.00 in. and is available in 3 column sizes, with 16, 20, and 24 in. travel in Z axis. Equipped with high-accuracy telecentric optics,... Read More

Machinery & Machining Tools

Benchtop Tool Presetter features camera and LCD touchscreen.

July 30, 2015

Equipped with 5.7 in. color LCD, DIASET enables one-touch angle, radius, diameter, and length measurements. Stable measuring column and mineral cast base ensure rigidity and temperature resistance for repeatability and positioning accuracy of .0001 in. Rotating spindle allows guaranteed accuracy of runout measurements to less than .0008 in. T.I.R. Capable of storing up to 99 reference points,... Read More

Machinery & Machining Tools

Boring Kit supports wide diameter range with one head.

July 9, 2015

With just one head, EWN 2-50XL Boring Kit offers precision boring solution for diameter range of .700–6.000 in. Kit features rigid, dynamic center-mounted boring bar/insert holder capable of maintaining consistent precision throughout full range. Boring head offers adjustments of Ø.0002 in./div, and coolant through is standard with max pressure of 300 psi. When using outboard insert... Read More

Fasteners & Hardware, Machinery & Machining Tools

Indexable Boring Tool permits small-hole rough boring.

July 7, 2015

With boring range of 16–21 mm diameter, MW Boring Tool is suited for semi-finish boring operations of workpieces with die cast holes. Product is built with 20 mm diameter straight shank and performs best when paired with milling chuck at fixed bore depths up to 4 x D. Spiral groove carved into body facilitates clean chip removal with help of coolant holes near end of groove.... Read More

Machinery & Machining Tools

Micro Drill accelerates starter hole creation in wire EDM.

February 25, 2015

With its flute- and cutting-edge geometry, Sphinx micro deep-hole drill helps conserve time during creation of wire EDM starter holes. Functionality replaces process of plunge EDM to establish starter hole, and construction of carbide with abrasion-resistant coating promotes efficacy during use on high-strength alloyed tool steels. Holes with length/diameter ratio of up to 80 x Ø... Read More

Machinery & Machining Tools

Intelligent Chucks enable part loading automation.

January 15, 2015

With table integration that lets robots pick and place fixtured workpieces into machine, ESA 120/70 automation chuck allows intelligent interface and communication with controller using standard Unilock knobs. Product checks for workpiece presence, proper orientation, and clamping and communicates back to controller when workpiece is in place and ready to be machined. Conversely, machine... Read More

Material Handling & Storage

Clamping System Kit works with Haas rotary indexers.

December 20, 2013

Available in kit, modular Unilock Zero-Point Clamping System is specifically designed for all Haas 160 mm platter rotary indexing tables. Equipped with ISM 160 single chuck solution for face of 4th or 5th axis rotary tables, adapter rests between chuck and spindle face of rotary indexer itself. Zero-point clamping uses spring pressure to drive multiple clamping pins against tapered clamping knob.... Read More

Machinery & Machining Tools

Indexable Cutters work with all steels, cast iron, and aluminum.

April 4, 2013

Offered in single- and 4-insert designs, BIG Daishowa R-Cutter front and back radius chamfering mill features rake angles that reduce cutting resistance and minimize burr generation. Coated carbide insert design allows for 4 indexes and is available with radii of .02–.16 in. Designed for back spot facing of cap bolt holes (sizes M6–M16), BIG Daishowa BF-Cutter features offset design and... Read More

Machinery & Machining Tools

Finish Boring Head targets micro-machining applications.

February 22, 2013

Offered in diameters from Ø.016-.276 in. with max through-tool coolant pressure of 300 psi, Series EWN 04-7 is intended for use on micro-milling machines with high-speed spindles such as HSK-E25, E32, or E40. Product features high precision adjustment accuracy of .0005 in./Ø and .0001 in./Ø through use of Vernier scale. Available with Kaiser KA1 modular connection or Ø10 mm... Read More

Machinery & Machining Tools

Digital Boring Heads feature IP69K seal rating.

February 6, 2013

Kaiser Series 310 EWD Precision Finish Digital Boring Heads cover 1.614–8.000 in. dia range, feature through-spindle coolant capability with directional coolant ports, and can perform back boring operations via reversal of insert holder. Kaiser Series 318 Large Diameter Finish Boring System features digital display and is based on aluminum extension slides. Supporting variety of... Read More

Machinery & Machining Tools, Material Handling & Storage, Mounting & Attaching Products

Flexible Workholding Solutions target 5-axis machine tables.

January 11, 2013

Unilock 5-axis workholding product offerings locate/stabilize workpieces. With dual 45° 105/65 Base Plates, 5-Axis Duo Bridge can mount directly on top of 5-axis table or be loaded through pair of zero-point chucks. Unilock 5-Axis Riser Chucks, Extensions, and Reductions, with 80 mm working diameter, are offered on base plates or as stacking modules in 75 and 100 mm heights.... Read More

Machinery & Machining Tools

Tooling System matches proper tool holder to application.

March 30, 2012

Suited for the aerospace industry, HSK-A125 can handle large-scale titanium and other workpieces on massive tables of machines such as Makino's T2 and T4 models. Product lineup features myriad tool holder types, including HMC and Mega Double Power milling chucks up to 2 in. dia, Mega ER/Mega N/Mega E collet chucks, shrink fit holders, face mill adapters, Kaiser KAB adapters, and Mega Synchro... Read More

Other Company News from
BIG KAISER Precision Tooling, Inc.

May 19, 2010

x x.