Company News

Macro Sensors

7300 US Rte. 130 N., Pennsauken, NJ, 08110, US

  • 856-662-8000

General Information:
Eileen Otto
USA
Phone: 856-662-8000
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
Macro Sensors

Electronic Components & Devices, Test & Measuring Instruments

Signal Conditioner supports electronic partitioning.

August 12, 2014

Designed for operation with passive sensors remotely located up to 100+ ft, EAZY-CAL LVC 4000 Signal Conditioner is configurable with any type of LVDT, RVDT, VR half bridge, and even LVDT-based pressure sensors. Pushbutton programmable unit offers choice of 2,500, 5,000, 7,500, or 10,000 Hz drive frequency, as well as 4–20 mA (analog), 0–10 Vdc (analog), and RS485 (digital) outputs. For multiple-channel applications, up to 16 devices can be connected together in master/slave configuration. Read More

Sensors, Monitors & Transducers, HVAC, Machinery & Machining Tools

LVDT Linear Positioning Sensors replace proximity sensors.

January 29, 2014

In automated control systems of hot air, heat staking machinery used for manufacturing thermoplastic assemblies, DC-powered HSER 750 Series provides feedback to absolute position of stake depth. Output signals are fed into PLC that alerts operators when limits fall out of parameters to ensure correct alignment. In-line mounting and absolute measuring ranges up to 20 in. render physical adjustments unnecessary, and hermetically sealed construction is impervious to dirt and corrosive elements. Read More

Sensors, Monitors & Transducers

LVDT Position Sensors withstand pressures to 5,000 psi.

June 25, 2013

Designed for use in subsea measurement systems, SSIR 937 Series Submersible LVDT Position Sensors feature Inconel construction and high pressure Seacon-Brantner subsea connector. Also included is 4–20 mA 2-wire, loop-powered I/O to minimize noise and number of pressure-sealed connections. Rugged sensors have 0.94 in. dia. and are designed for continuous monitoring in pressure-balanced, oil-filled containers or directly in seawater. They are available in standard ranges of 2.00, 3.00, or 4.00 in. Read More

Sensors, Monitors & Transducers

Submersible LVDT Position Sensors suit subsea measurement systems.

June 17, 2013

Able to withstand deep sea environments with external pressures to 5,000 psi, 0.94 in. dia SSIR 937 Series is designed for use in either pressure-balanced, oil-filled containers or directly in seawater. Inconel construction enhances reliability, ensuring LVDTs can meet life requirements of at least 20 years – even if device is fully exposed to seawater at depths >10,000 ft. Along with 4–20 mA, 2-wire, loop-powered I/O, series offers standard ranges of 2.00, 3.00, or 4.00 in. Read More

Electronic Components & Devices, Test & Measuring Instruments

Signal Conditioner provides analog and RS-485 outputs.

May 16, 2013

Compatible with most LVDT and RVDT linear position sensors, EAZY-CAL LVC 4000 digitally communicates with up to 16 devices simultaneously and can be connected together in master/slave configuration for multiple channel applications. DIN rail-mount unit features digital calibration using 2 pushbutton front panel controls to set zero and full scale. To facilitate LVDT linear position sensor operation in extreme environments, signal conditioners can be remotely located by up to 100+ ft. Read More

Sensors, Monitors & Transducers

LVDT Linear Position Sensors target power generation markets.

November 12, 2012

UL/ULC listed and ATEX-approved, HLR 750 Series is suitable for gas turbine environments. Sensors are constructed entirely of stainless steel and are hermetically sealed for resistance against environmental elements. With electronics remotely located, AC-operated units can withstand temperature of 300°F on turbine. Available in full-scale measurement ranges from ±1 in. to ±10 in., sensors offer repeatability better than 0.01% of FS and non-linearity of less than 0.25% of full range output. Read More

Sensors, Monitors & Transducers

LVDT Position Sensors perform in harsh environments.

April 17, 2012

Environmentally robust CD 375 Series LVDT position sensors operate in temperatures of -65 to +400°F and in pressures up to 35 kpsi. Sensor case is vented to equalize pressure inside and outside LVDT linear position sensor. Measuring 3/8 in diameter, AC-operated sensors are designed for dynamic measurement such as valve and pneumatic cylinder positionings. They are available in full-scale measurement ranges from ±0.025 to ±1.0 in. Read More

Test & Measuring Instruments

LVDT-Based Gaging Probes offer precise measuring capabilities.

February 28, 2012

Available in 3 standard ranges of +0.020, +0.100, and +0.200 in., BB Series LVDT dimensional gaging probes combine AC-LVDT with linear ball bearing assembly to reduce radial play and core skewing, resulting in repeatability of 0.000006 in. Spring-loaded LVDTs feature rubber bellows covering probe shaft to prevent contaminants from entering into bearing. Probes are available in 4 models including full bridge, half bridge, pneumatic and soft touch. Read More

Other Company News from
Macro Sensors