Instruments For Industry, Inc.

Communication Systems & Equipment

Solid-State Microwave Pulse PA has 1.0-2.0 GHz frequency range.

Able to supply 4 kW pulse power up to 10% duty cycle with max pulse width of 100 -µsec, S21-4KWP-2KWP FLEX can also be configured into 2 separate 2 kW pulse amplifiers. IEEE-488 and RS232 interfaces come standard, and UI features backlit screen that shows forward/reverse power indication, system status, and self-diagnostic information. Power indication is shown in pulse, and all operating...

Read More »
Communication Systems & Equipment

Solid-State Microwave Pulse PA has 1.0-2.0 GHz frequency range.

Able to supply 4 kW pulse power up to 10% duty cycle with max pulse width of 100 Â-µsec, S21-4KWP-2KWP FLEX can also be configured into 2 separate 2 kW pulse amplifiers. IEEE-488 and RS232 interfaces come standard, and UI features backlit screen that shows forward/reverse power indication, system status, and self-diagnostic information. Power indication is shown in pulse, and...

Read More »
Solid-State Pulse Amplifier features dual-mode operation.
Communication Systems & Equipment

Solid-State Pulse Amplifier features dual-mode operation.

Combining continuous and pulse operating modes, S31-500-900P performs 600 V/m radar pulse radiated immunity testing in 0.8–3.1 GHz band. GaN-based amplifier has 500 W continuous rating and can deliver >900 W in pulse mode. Peak power rating allows unit to generate 600 V/m test with either high gain narrow band antennas or single wide band antenna. Features include pulse width up to 570 -µsec,...

Read More »
Amplifiers for Shipboard & Air Borne Applications
Communication Systems & Equipment

Amplifiers for Shipboard & Air Borne Applications

Instruments for Industry has over 50 years of experience in the RF/IF microwave power industry. Instruments for Industry is a.k.a. IFI - the Power of Choice". TWT High Power Amplifiers have been our primary focus for every EMC and EMI testing application. With power RF amplifiers ranging from DC to 40GHz, 1 watt to 50 kilowatts (Traveling wave tube, solid state microwave high power amps). IFI is...

Read More »
Amplifiers for Shipboard & Air Borne Applications
Communication Systems & Equipment

Amplifiers for Shipboard & Air Borne Applications

Instruments for Industry has over 50 years of experience in the RF/IF microwave power industry. Instruments for Industry is a.k.a. IFI - the Power of Choice". TWT High Power Amplifiers have been our primary focus for every EMC and EMI testing application. With power RF amplifiers ranging from DC to 40GHz, 1 watt to 50 kilowatts (Traveling wave tube, solid state microwave high power amps). IFI is...

Read More »
Power Amplifiers target EMC testing applications.
Communication Systems & Equipment

Power Amplifiers target EMC testing applications.

Available at power levels from 10-500 W, IFI CMC300 Series provides minimum of 300 W of CW power for 10 MHz to 1.0 GHz frequency range. Single-drawer units feature compact design measuring 10.5 in. H (depending on power level and options) x 19 in. W x 25.25 in. D. Amplifiers are suited for high power test requirements for pre-compliance testing, EMC testing, and all lab and test installations.

Read More »
Power Amplifiers target EMC testing applications.
Communication Systems & Equipment

Power Amplifiers target EMC testing applications.

Available at power levels from 10-500 W, IFI CMC300 Series provides minimum of 300 W of CW power for 10 MHz to 1.0 GHz frequency range. Single-drawer units feature compact design measuring 10.5 in. H (depending on power level and options) x 19 in. W x 25.25 in. D. Amplifiers are suited for high power test requirements for pre-compliance testing, EMC testing, and all lab and test installations.

Read More »
Communication Systems & Equipment

Solid-State Microwave Pulse PA has 1.0-2.0 GHz frequency range.

Able to supply 4 kW pulse power up to 10% duty cycle with max pulse width of 100 -µsec, S21-4KWP-2KWP FLEX can also be configured into 2 separate 2 kW pulse amplifiers. IEEE-488 and RS232 interfaces come standard, and UI features backlit screen that shows forward/reverse power indication, system status, and self-diagnostic information. Power indication is shown in pulse, and all operating...

Read More »
Communication Systems & Equipment

Solid-State Microwave Pulse PA has 1.0-2.0 GHz frequency range.

Able to supply 4 kW pulse power up to 10% duty cycle with max pulse width of 100 Â-µsec, S21-4KWP-2KWP FLEX can also be configured into 2 separate 2 kW pulse amplifiers. IEEE-488 and RS232 interfaces come standard, and UI features backlit screen that shows forward/reverse power indication, system status, and self-diagnostic information. Power indication is shown in pulse, and...

Read More »
Solid-State Pulse Amplifier features dual-mode operation.
Communication Systems & Equipment

Solid-State Pulse Amplifier features dual-mode operation.

Combining continuous and pulse operating modes, S31-500-900P performs 600 V/m radar pulse radiated immunity testing in 0.8–3.1 GHz band. GaN-based amplifier has 500 W continuous rating and can deliver >900 W in pulse mode. Peak power rating allows unit to generate 600 V/m test with either high gain narrow band antennas or single wide band antenna. Features include pulse width up to 570 -µsec,...

Read More »
Amplifiers for Shipboard & Air Borne Applications
Communication Systems & Equipment

Amplifiers for Shipboard & Air Borne Applications

Instruments for Industry has over 50 years of experience in the RF/IF microwave power industry. Instruments for Industry is a.k.a. IFI - the Power of Choice". TWT High Power Amplifiers have been our primary focus for every EMC and EMI testing application. With power RF amplifiers ranging from DC to 40GHz, 1 watt to 50 kilowatts (Traveling wave tube, solid state microwave high power amps). IFI is...

Read More »
Amplifiers for Shipboard & Air Borne Applications
Communication Systems & Equipment

Amplifiers for Shipboard & Air Borne Applications

Instruments for Industry has over 50 years of experience in the RF/IF microwave power industry. Instruments for Industry is a.k.a. IFI - the Power of Choice". TWT High Power Amplifiers have been our primary focus for every EMC and EMI testing application. With power RF amplifiers ranging from DC to 40GHz, 1 watt to 50 kilowatts (Traveling wave tube, solid state microwave high power amps). IFI is...

Read More »
Power Amplifiers target EMC testing applications.
Communication Systems & Equipment

Power Amplifiers target EMC testing applications.

Available at power levels from 10-500 W, IFI CMC300 Series provides minimum of 300 W of CW power for 10 MHz to 1.0 GHz frequency range. Single-drawer units feature compact design measuring 10.5 in. H (depending on power level and options) x 19 in. W x 25.25 in. D. Amplifiers are suited for high power test requirements for pre-compliance testing, EMC testing, and all lab and test installations.

Read More »
Power Amplifiers target EMC testing applications.
Communication Systems & Equipment

Power Amplifiers target EMC testing applications.

Available at power levels from 10-500 W, IFI CMC300 Series provides minimum of 300 W of CW power for 10 MHz to 1.0 GHz frequency range. Single-drawer units feature compact design measuring 10.5 in. H (depending on power level and options) x 19 in. W x 25.25 in. D. Amplifiers are suited for high power test requirements for pre-compliance testing, EMC testing, and all lab and test installations.

Read More »

All Topics