Company News

Sandvik Coromant Co.

1702 Nevins Rd., Fair Lawn, NJ, 07410, US

  • 201-794-5165
  • 800-726-3845
Share Like Tweet Add Email

Latest New Product News from
Sandvik Coromant Co.

Machinery & Machining Tools

Boring Tool System supports seal ring groove machining.

March 19, 2015

Used with CoroBore® XL System, SpiroGrooving™ utilizes spirograph tool path to create close-tolerance seal ring grooves. Parts of insert cutting edge have interrupted cutting behavior, eliminating long chips that can tangle tool and spindle. With internal coolant feature, CoreBore XL solution is suited for making seal ring grooves in pre-clad machining of steel and stainless steel components. Roughing and finishing are carried out in same operation, maximizing productivity. Read More

Machinery & Machining Tools

Groove Milling Cutter promotes process security.

March 11, 2015

Dedicated for groove milling and parting off operations, CoroMill® QD features optimized geometries and internal coolant solution, based on 4-channel delivery, to address chip issues. Insert geometry deforms chips to narrower shape than groove, and chips are flushed out by coolant. These aspects promote secure and trouble-free production. Available adapters enable use of these cutters in small- to medium-sized machining centers, large machining centers, and multi-task machines. Read More

Machinery & Machining Tools

Solid End Mills quickly remove large amounts of metal.

February 27, 2015

In addition to heavy roughing, CoroMill® Plura Heavy Duty End Mills are suitable for shoulder milling, full slot milling, ramping and helical interpolation in steel and stainless steel as well as cast iron and heat-resistant materials. Flute shape assures effective chip evacuation when machining large depth of cut. Design also prevents re-cutting of chips and sudden tool breakage. One grade was developed for dry machining, while another grade handles large engagements in wet machining. Read More

Machinery & Machining Tools, Fasteners & Hardware

Steel Turning Grades optimize transmission manufacturing.

October 10, 2014

Offering high wear resistance, GC4315 and GC4325 with Inveio™ are designed for automotive industry. GC4315 supports soft stage turning in stable conditions, while tougher steel turning grade GC4325 manages interrupted cuts and uneven depths of cut at high speeds. If spindle speed limit prevents full use of their capacity, maximum productivity can be achieved by applying higher feed rates. Both are suitable choices for outer-diameter turning, copying, and profiling. Read More

Portable Tools, Machinery & Machining Tools

Secure Cutters handle machining of deep internal grooves.

October 7, 2014

In addition to being used for deep external grooving and parting off, CoroCut® QD system includes CoroTurn® SL blades for deep grooves in internal machining. Modularity of CoroTurn SL interface enables tool assemblies optimized for specific application, while stable clamping mechanism enable use of Silent Tools™ dampened boring bars for vibration-free machining with long overhangs. This also allows deep internal grooving for tube-shaped components with high process security. Read More

Mechanical Components & Assemblies, Machinery & Machining Tools, Services

Deep Hole Drill produces close tolerance holes. .

September 25, 2014

Suitable for diameters from 0.614–2.559 in. and tolerance demands of IT 9, CoroDrill® 808 features optimized pad design for good hole finish, unique edge preparation for chip breaking, and reinforced periphery insert corner for added security. Drill is equipped with fully traceable dot matrix. Two-dimensional patterned array is used for storage and display of various types of information, such as measurement protocol, which includes data on diameter and run out of drill. Read More

Vision Systems, Software, Machinery & Machining Tools

CAM Software affords gear and spline manufacturing flexibility.

September 10, 2014

InvoMilling™ v1.0 enables flexible manufacturing of gears and splines on universal 5-axis machining centers. Specifically, this solution generates CNC program to produce different gear profiles with limited range of standard-stocked precision tools. Graphics promote usability, while milling path generation and simulation functionality lend to operational flexibility.
Read More

Machinery & Machining Tools, Fasteners & Hardware

Insert Grade offers wear resistance for cast iron milling.

February 20, 2014

Equipped with Inveio™ technology, which uses uni-directional crystal orientation, GC3330 Insert Grade offers endurance, predictability, and extended tool life. Product is suitable for both dry and wet cast iron milling, as well as for both grey and nodular cast iron materials. GC3330 is available for variety of milling cutters for face-, shoulder-, profile-, high feed-, and parting and grooving milling. Read More

Machinery & Machining Tools, Mechanical Power Transmission, Mounting & Attaching Products

Heads, Cutters, and Holders offer exchangeable head coupling.

October 22, 2013

Compatible with solid carbide heads, indexable milling cutters, boring heads, integrated machine adapters, and different shanks, Exchangeable Head Coupling is based on self-centering screw thread for secure mounting. Physical stop enables users to feel when head is correctly tightened and helps to not overstress clamping. Conical portion is shaped to provide best run-out, while pre-loaded taper and flange contacts provide optimized modular connection with extreme rigidity. Read More

Fasteners & Hardware

Coated Cemented-Carbide Grade is suited for steel turning.

September 26, 2013

GC4325 indexable inserts are designed for increased cutting speeds and longer, more predictable tool life with high reliability over extended broad ISO P25 application area. Insert substrate and coating withstand elevated temperatures, reducing effect that causes excessive wear. Capability to maintain insert edge line at high temperatures promotes cutting speeds and security through more predictable and extended tool life. Read More

Fasteners & Hardware

Indexable Inserts suit steel turning applications.

September 25, 2013

Capable of retaining intact edge line in high temperatures, GC4325 Coated Cemented-Carbide Grade covers extended ISO P25 application areas, including materials ranging from ductile low-carbon steels to high-alloy hard steels, bar material to forgings, and castings to pre-machined parts. Read More

Mechanical Components & Assemblies, Machinery & Machining Tools

Exchangeable Tip Drill supports stainless steel usage.

September 6, 2013

Suitable for steel and cast iron drilling, CoroDrill 870 can be tailored to optimize applications through diameter range, steps, and length possibilities. Cutting edge geometries and grades provide safe cutting process, maximizing penetration rates while maintaining chip control. Grade GC2234 includes fine-grained high chromium substrate and thin AITiN PVD coating for chip resistance. Available in diameter range of 0.394–1.049 in., drill achieves hole tolerances of H9–H10. Read More

Machinery & Machining Tools

Compression End Mill supports composite machining.

July 15, 2013

Combining positive and negative helix to compress top and bottom of component edge, CoroMill® Plura minimizes potential for delamination, which is common when machining carbon-fiber reinforced polymers. Tool supports edge milling applications on workpieces with minimum thickness of 6 mm. Offered in diameters from 0.24-0.63 in. with lengths from 2.99-3.94 in., tool features 6 effective cutting edges, achieves surface finish of well below 0.0001 in., and supports cutting speeds of 656–1312 fpm. Read More

Machinery & Machining Tools

Face Grooving Heads feature coolant-through capability.

June 14, 2013

Available for 47–1,275 mm diameters, CoroBore® 825 SL Heads offer alternative to milling grooves for those operating in or serving sectors such as pumps and valves, hydraulics, and pulp/paper industry. Rotating axial face grooving tools use standard SL32 blade and CoroCut 1-2 inserts, but feature through-coolant capability for chip control. For 47-150 mm diameters, C6 and C8 adapters are available, while for diameters >150 mm, dedicated face grooving head with CoroBore XL can be deployed. Read More

Machinery & Machining Tools

Rough Face Milling Cutter features multi-edge design.

March 6, 2013

Available in 4-10 in. dia, CoroMill 357 is suitable for roughing and cubing in steel and cast iron on ISO 50 and larger machines. Double-sided, pentagonal inserts are housed in shim-protected tip seats, and cutter body has insert clamping system that facilitates and accelerates insert indexing. Taking depth of cut up to 0.394 in. with feed per tooth up to 0.0276 in./z, cutters feature support faces radially, axially, and on base that prevent deformation and ensure consistent performance. Read More

Machinery & Machining Tools

Precision Hydraulic Chuck serves milling, drilling operations.

February 27, 2013

Available in pencil, slender, or heavy-duty design, CoroChuck™ 930 is balanced according to DIN 69888. Brazed membrane, maximizing secure clamping with 2 supports on each side, promotes precision as well as pull-out security, while design ensures optimal torque transmission. Based on hydraulic tool clamping system, chuck can be tightened or released with dedicated torque wrench and holds tolerances within microns. Precision run-out can be measured at less than 157 µin. at 2.5 x DC. Read More

Machinery & Machining Tools

Exchangeable Head Milling System has internal coolant holes.

February 6, 2013

With precisely positioned internal coolant holes that optimize effect of coolant jet, CoroMill 316® can be applied for high-feed face milling, slot milling, helical interpolation, shoulder milling, profile milling, and chamfer milling of components in material groups from ISO P to ISO S. System allows machine shops to switch between various operations, such as cutter type, radius variation, teeth frequency, geometry, and grade. End mills are also suitable for 5-axis milling of flanks. Read More

Machinery & Machining Tools

High-Feed Milling Cutter features 5-edge design.

January 25, 2013

Intended for roughing to semi-finishing, CoroMill 419 is available in 1.25–4 in. dia range with various insert grades and geometries to accommodate needs of most materials and applications. Through coolant on all cutters promotes wet machining efficiency, while compressed air cooling option aids chip evacuation in deep cavity milling and helical interpolation. Features ensure productivity in applications requiring light cutting action and extended tool life. Read More

Machinery & Machining Tools

Solid Carbide Reamers come in spiral and straight flute designs.

December 17, 2012

With dedicated geometries and internal coolant, CoroReamer 435 is suitable for wide range of materials, while CoroReamer 835 is intended for steel and stainless steel materials. Reamers are available in spiral flute design for through holes and straight flute design for blind holes. Supplied in standard diameter range of 0.156–0.787 in., with achievable tolerance of IT7, reamers offer solution when high surface quality finish and close tolerances are required. Read More

Machinery & Machining Tools

Multi-Material End Mills suit roughing, finishing, and profiling.

November 7, 2012

Available in variety of component sizes and shapes, Multi-Material End Mills minimize requirement to change tools for every different operation. Units feature reinforced end teeth to avoid premature chipping, cylindrical land width, and flat relief for maximum stability. Coating on insert grade GC1630 is extremely resistant to wear and is especially suitable for roughing and finishing dry or wet. Read More

Other Company News from
Sandvik Coromant Co.