IDEC Corp.
Sunnyvale, CA 94089
New High-Performance HMI Touchscreen from IDEC Provide Space Saving All-in-One Automation Solution
Available in HG2G-V5 5.7”, HG3G-V8 8.4”, HG3G-VA 10.4” and HG4G-VC 12.1” models. Provides high resolution display: 1024 x 768 pixels and backlight life of 100,000 hours with up to 800 cd/m2 brightness. Operating temperature range of -20°C to +60°C and IP66F, IP67F, Type 4X, 12, 13, and Class I Div 2 approval ratings.
Read More »
Emergency Stop Switches are only 19.5 mm deep behind panel.
Unibody XA E-stop switches are available with 29 and 40 mm mushroom operators, and offer up to 4 contacts with safe-break technology, which uses spring-pressure to assure that NC contacts will open if switch is damaged or if contact blocks break off due to excessive force. IP65 and IP40 rated, switches are available with engraved EMO markings, in 1NC and 2NC contact configurations, as well as...
Read More »
Controllers are offered with external message display panel.
Equipped with 4 built-in analog inputs, 4 counter analog inputs, and up to 200 memory blocks, FL1E SmartRelays can manage automatic lighting, access control, watering systems, pump control, or ventilation systems. Optional external message display panel with 4 x 12 backlit LCD provides visual interface to view system status at any time. Display is bargraph-capable and includes scrolling feature...
Read More »
Sensors provide area detection and measurement.
Utilizing crossed-beam detection method, IDEC-DS AS1 photoelectric light grids sense objects as slim as 0.2 mm inside 100 mm height and over operating distances reaching 2.1 m between emitter and receiver. Analog output-equipped IDEC-DS DS1 sensors provide multi-beam light grid suited for detecting and measuring objects with different shapes and sizes. Specifications include 150 mm height, 5 mm...
Read More »Laser Distance Sensors utilize Time-of-Flight technology.
Supplied in IP67-rated metal housing suited for harsh environments, S80 distance measurement sensors detect objects as small as 0.4 mm and operate over distances up to 7 m. Brightness of laser spot emission facilitates setup and alignment, and 4-digit display aids in parameter setup and checking. Along with 1 ms response time, sensors feature 2 PNP or NPN outputs, scaleable 4-20 mA output, and...
Read More »Emergency Stops feature safe break action.
With XN Series, maintenance technicians can install up to 20 personal padlocks, preventing unauthorized resetting of latched emergency stop switch. Units ensure NC contacts open when contact block is separated from operator. Safety Interlock Mechanism keeps contacts open when operator is locked, while Direct Opening Action ensures that even if contacts are welded, force applied on button will...
Read More »Touchscreen HMI promotes visibility, even in bright light.
Featuring 500 cd/m2 illumination, 4.6 in. HG1F can be mounted vertically or horizontally and is capable of monitoring multiple controllers in various locations. This STN monochrome LCD with analog resistive-touch overlay offers 300 x 100 pixel resolution, supports 16 monochrome shades, and has adjustable contrast. Along with 1 MB built-in memory, operator interface offers RS232 or RS485 and RS422...
Read More »
Touchscreens control up to 16 PLCs in Ethernet network.
Available in 10.4 and 12.1 in., TFT color LCD touchscreens feature WindO/I-NV2 3.01 programming software and Ethernet/IP driver. Units also include Ethernet networking protocols Modbus TCP/IP 1:N driver and IDEC 1:N driver. Programming software features security function and alarm logging. Alarm logging stores historical events and has configuration compliant to Instrument Society of America...
Read More »Web Module enables remote system management/maintenance.
Offering remote access from anywhere, Web Server Module makes it possible to check status of industrial systems from office or floor in real-time. Data exchange capability enables communication between several IDEC PLCs over Ethernet network. Remote maintenance allows users to use WindLDR or WindSRV to remotely monitor, download, and upload any ladder program, while web monitoring lets users...
Read More »Control Relay offers expandable, pushbutton operation.
Available with or without LCD, FL1D SmartRelays incorporate PI controller that lets users control temperature, pressure, or level with 6 predefined parameter sets. Modular and adaptable base modules are equipped with 8 digital inputs and 4 digital outputs, enabling expansion up to 24 digital inputs, 16 digital outputs, and 8 analog inputs. Unit is programmed via LCD screen or included WindLGC...
Read More »
New High-Performance HMI Touchscreen from IDEC Provide Space Saving All-in-One Automation Solution
Available in HG2G-V5 5.7”, HG3G-V8 8.4”, HG3G-VA 10.4” and HG4G-VC 12.1” models. Provides high resolution display: 1024 x 768 pixels and backlight life of 100,000 hours with up to 800 cd/m2 brightness. Operating temperature range of -20°C to +60°C and IP66F, IP67F, Type 4X, 12, 13, and Class I Div 2 approval ratings.
Read More »IDEC Releases iOS and Android Apps for PLC Access
WindEDIT Lite apps run on smartphones and tablets, providing quick and easy two-way local and remote access to IDEC’s family of MicroSmart FC6A PLCs IDEC Corporation, Sunnyvale, CA, February 21, 2018 - IDEC Corporation announces the release of its WindEDIT Lite app for iOS and Android devices, providing two-way access to its family of MicroSmart FC6A PLCs. The app provides much quicker, simpler...
Read More »
Emergency Stop Switches are only 19.5 mm deep behind panel.
Unibody XA E-stop switches are available with 29 and 40 mm mushroom operators, and offer up to 4 contacts with safe-break technology, which uses spring-pressure to assure that NC contacts will open if switch is damaged or if contact blocks break off due to excessive force. IP65 and IP40 rated, switches are available with engraved EMO markings, in 1NC and 2NC contact configurations, as well as...
Read More »
Controllers are offered with external message display panel.
Equipped with 4 built-in analog inputs, 4 counter analog inputs, and up to 200 memory blocks, FL1E SmartRelays can manage automatic lighting, access control, watering systems, pump control, or ventilation systems. Optional external message display panel with 4 x 12 backlit LCD provides visual interface to view system status at any time. Display is bargraph-capable and includes scrolling feature...
Read More »
Sensors provide area detection and measurement.
Utilizing crossed-beam detection method, IDEC-DS AS1 photoelectric light grids sense objects as slim as 0.2 mm inside 100 mm height and over operating distances reaching 2.1 m between emitter and receiver. Analog output-equipped IDEC-DS DS1 sensors provide multi-beam light grid suited for detecting and measuring objects with different shapes and sizes. Specifications include 150 mm height, 5 mm...
Read More »Laser Distance Sensors utilize Time-of-Flight technology.
Supplied in IP67-rated metal housing suited for harsh environments, S80 distance measurement sensors detect objects as small as 0.4 mm and operate over distances up to 7 m. Brightness of laser spot emission facilitates setup and alignment, and 4-digit display aids in parameter setup and checking. Along with 1 ms response time, sensors feature 2 PNP or NPN outputs, scaleable 4-20 mA output, and...
Read More »Emergency Stops feature safe break action.
With XN Series, maintenance technicians can install up to 20 personal padlocks, preventing unauthorized resetting of latched emergency stop switch. Units ensure NC contacts open when contact block is separated from operator. Safety Interlock Mechanism keeps contacts open when operator is locked, while Direct Opening Action ensures that even if contacts are welded, force applied on button will...
Read More »Touchscreen HMI promotes visibility, even in bright light.
Featuring 500 cd/m2 illumination, 4.6 in. HG1F can be mounted vertically or horizontally and is capable of monitoring multiple controllers in various locations. This STN monochrome LCD with analog resistive-touch overlay offers 300 x 100 pixel resolution, supports 16 monochrome shades, and has adjustable contrast. Along with 1 MB built-in memory, operator interface offers RS232 or RS485 and RS422...
Read More »
Touchscreens control up to 16 PLCs in Ethernet network.
Available in 10.4 and 12.1 in., TFT color LCD touchscreens feature WindO/I-NV2 3.01 programming software and Ethernet/IP driver. Units also include Ethernet networking protocols Modbus TCP/IP 1:N driver and IDEC 1:N driver. Programming software features security function and alarm logging. Alarm logging stores historical events and has configuration compliant to Instrument Society of America...
Read More »Web Module enables remote system management/maintenance.
Offering remote access from anywhere, Web Server Module makes it possible to check status of industrial systems from office or floor in real-time. Data exchange capability enables communication between several IDEC PLCs over Ethernet network. Remote maintenance allows users to use WindLDR or WindSRV to remotely monitor, download, and upload any ladder program, while web monitoring lets users...
Read More »