Bristol Babcock
Watertown, CT 06795-1631
Share:
Smart Transmitter draws less than 2 mA.
Multivariable MVT 3808 provides measurement of differential pressure, static pressure, and process temperature with 0.075% reference accuracy. Communication using BSAP and Modbus protocols is compatible with most controllers, RTU products, and SCADA systems. Suited for remote site applications, unit can operate in hazardous areas with explosion-proof and intrinsically-safe systems. Calibration...
Read More »
Controller suits energy, water, and wastewater industries.
ControlWave Micro flexible process automation control system combines technologies provided by PLC, RTU, and DCS architectures into hybrid system suited for process control applications. Scalable solution for mid-sized applications has 3 serial communication ports and one optional 10/100 Mb Ethernet I/P port. ControlWave Designer programming software supports all 5 IEC 61131-3 programming...
Read More »Software provides plant-wide access to information.
PocketBSI v1.1 portable, handheld version of OpenBSI communication interface and utilities provides full on-line access to ControlWave, Network 3000, and TeleProduct lines. Operating on ARM based Pocket PCs running OS 2000, software allows users to access real-time variable information through preconfigured displays. Parameters can be modified to change setpoints and ranges and to open and close...
Read More »Redundant System provides backup for process automation systems.
ControlWave Hot-Standby Control Redundancy System prevents single point of failure from shutting down system. In event of primary CPU failure, system will automatically switch to Hot Standby backup CPU. All process control and communication functions are automatically switched to backup. Standby CPU is automatically updated via Ethernet link to on-line unit. ControlWave also provides backup of...
Read More »Rack allows for expansion of I/O.
ControlWave I/O Expansion Rack consists of 2, 4, or 8 slot Control Wave Chassis containing Ethernet communication engine dedicated to communications between main processor and expansion I/O. Communication engine also supports timing functionality and battery backed RAM to retain outputs during short power outages. Rack is connected to main or host ControlWave controller rack via Ethernet physical...
Read More »Data Historian communicates via the web.
Enhancements to OpenBSI v4.1 includes Harvester data collection module and WebBSI web-based access. Harvester automatically converts collected data to .CSV and ODBC file formats for compatibility with standard applications including relational databases. WebBSI includes set of ActiveX Controls for reading and writing real-time and historical trending, recipe editing, and transmitter calibration...
Read More »
Proces Controller combines PLC, RTU and DCS architectures.
ControlWave LP utilizes 486-based CPU design for SCADA applications. It offers isolated I/O with wide temperature operation of -40 to +70 deg C for remote sites, and low power consumption for solar applications. Local I/O provides 16 DI, 8 DO, 8AI, 4HSC and up to 8 optional AO. ControlWave LP has 5 serial-communication ports and one 10 Mb Ethernet I/P port. Single controller provides logic,...
Read More »Programming Software defines process control system.
Version 2.1 ControlWave Designer software supports IEC 61131-3 programming languages extended with library of process control function blocks. It combines PLC, RTU and DCS architectures into hybrid system that is suitable for industrial control applications. Features include time stamped alarming, audit and historical archive storage, client/server function blocks for interfacing with other...
Read More »
Smart Transmitter draws less than 2 mA.
Multivariable MVT 3808 provides measurement of differential pressure, static pressure, and process temperature with 0.075% reference accuracy. Communication using BSAP and Modbus protocols is compatible with most controllers, RTU products, and SCADA systems. Suited for remote site applications, unit can operate in hazardous areas with explosion-proof and intrinsically-safe systems. Calibration...
Read More »
Controller suits energy, water, and wastewater industries.
ControlWave Micro flexible process automation control system combines technologies provided by PLC, RTU, and DCS architectures into hybrid system suited for process control applications. Scalable solution for mid-sized applications has 3 serial communication ports and one optional 10/100 Mb Ethernet I/P port. ControlWave Designer programming software supports all 5 IEC 61131-3 programming...
Read More »Software provides plant-wide access to information.
PocketBSI v1.1 portable, handheld version of OpenBSI communication interface and utilities provides full on-line access to ControlWave, Network 3000, and TeleProduct lines. Operating on ARM based Pocket PCs running OS 2000, software allows users to access real-time variable information through preconfigured displays. Parameters can be modified to change setpoints and ranges and to open and close...
Read More »Redundant System provides backup for process automation systems.
ControlWave Hot-Standby Control Redundancy System prevents single point of failure from shutting down system. In event of primary CPU failure, system will automatically switch to Hot Standby backup CPU. All process control and communication functions are automatically switched to backup. Standby CPU is automatically updated via Ethernet link to on-line unit. ControlWave also provides backup of...
Read More »Rack allows for expansion of I/O.
ControlWave I/O Expansion Rack consists of 2, 4, or 8 slot Control Wave Chassis containing Ethernet communication engine dedicated to communications between main processor and expansion I/O. Communication engine also supports timing functionality and battery backed RAM to retain outputs during short power outages. Rack is connected to main or host ControlWave controller rack via Ethernet physical...
Read More »Data Historian communicates via the web.
Enhancements to OpenBSI v4.1 includes Harvester data collection module and WebBSI web-based access. Harvester automatically converts collected data to .CSV and ODBC file formats for compatibility with standard applications including relational databases. WebBSI includes set of ActiveX Controls for reading and writing real-time and historical trending, recipe editing, and transmitter calibration...
Read More »
Proces Controller combines PLC, RTU and DCS architectures.
ControlWave LP utilizes 486-based CPU design for SCADA applications. It offers isolated I/O with wide temperature operation of -40 to +70 deg C for remote sites, and low power consumption for solar applications. Local I/O provides 16 DI, 8 DO, 8AI, 4HSC and up to 8 optional AO. ControlWave LP has 5 serial-communication ports and one 10 Mb Ethernet I/P port. Single controller provides logic,...
Read More »Programming Software defines process control system.
Version 2.1 ControlWave Designer software supports IEC 61131-3 programming languages extended with library of process control function blocks. It combines PLC, RTU and DCS architectures into hybrid system that is suitable for industrial control applications. Features include time stamped alarming, audit and historical archive storage, client/server function blocks for interfacing with other...
Read More »